[Wed Jan 25 01:02:50 2012] Detection parameters:
  Position = (266.1, 307.2) = 0 43 2.96 41 15 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6758.7 +/- 99.2
  Background counts = 63.8
  Rate = 0.1 +/- 0.002

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 2.43'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Wed Jan 25 09:18:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.785
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.64"
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jan 25 16:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src5.csv
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jan 25 16:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src5.csv
[Wed Jan 25 16:12:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 7406.250000, observed total counts = 7396.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 4 = 0.158033 pixels
[Wed Jan 25 22:38:36 2012] 7520.330000 total counts/ 2790.730000 bgd. counts: snr = 89.529365
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.158033 pixels
  Position = (266.0, 307.3) = 0 43 2.99 41 15 24.3
  Extent = 5.6 (5.5-5.8)", rotation angle = 0
  Source counts = 4729.6 +/- 86.7
  Background counts = 2790.7
  Rate = 0.07 +/- 0.001
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 5.65"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.928
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.65"
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jan 26 18:45:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src5.csv
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jan 26 18:45:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src5.csv
[Thu Jan 26 18:45:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 7402.080000, observed total counts = 7396.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 4 = 0.000439 pixels
[Fri Jan 27 00:06:48 2012] 7514.580000 total counts/ 2786.020000 bgd. counts: snr = 89.585308
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000439 pixels
  Position = (266.0, 307.3) = 0 43 2.98 41 15 24.3
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 4728.6 +/- 86.7
  Background counts = 2786.0
  Rate = 0.07 +/- 0.001
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:19 2012] Counts = 4728.560000, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:19 2012] XMMSAS src. selection expression = ellipse(23093.036412, 26688.566200, 678.970820, 678.970820, 0.000000, X, Y)
[Sat Jan 28 04:46:19 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src4_src.reg
[Sat Jan 28 04:46:19 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (227, 268) - (305, 346)
[Sat Jan 28 04:46:19 2012] XMMSAS bgd. selection expression = annulus(23093.036412, 26688.566200, 2263.236065, 4526.472130, X, Y) && !ellipse(28609.344200, 27458.497200, 1301.052037, 1232.880035, 356.900530, X, Y) && !ellipse(26685.905400, 27915.396400, 480.308014, 480.308014, 0.000000, X, Y) && !ellipse(26390.977000, 26642.133540, 550.903216, 394.977611, 118.958700, X, Y) && !ellipse(21386.017471, 26032.965240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24924.345900, 27454.583600, 339.450410, 339.450410, 0.000000, X, Y) && !ellipse(22507.490600, 28642.546000, 434.552013, 392.565611, 98.079968, X, Y) && !ellipse(25473.484818, 26988.460634, 359.786971, 325.000892, 9.156307, X, Y) && !ellipse(25474.320600, 30868.774600, 385.363211, 385.363211, 0.000000, X, Y) && !ellipse(27288.310883, 27626.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.979400, 27509.894800, 354.992810, 354.992810, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(23867.650140, 31371.159800, 406.206412, 406.206412, 0.000000, X, Y) && !ellipse(22915.430800, 29889.633200, 383.604011, 383.604011, 0.000000, X, Y) && !ellipse(27193.579600, 22147.205000, 374.391211, 374.391211, 0.000000, X, Y) && !ellipse(27717.122000, 27128.236000, 1174.832034, 926.248027, 47.383900, X, Y) && !ellipse(27759.407200, 25890.182600, 295.434409, 295.434409, 0.000000, X, Y) && !ellipse(22191.156433, 29983.603699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28398.683960, 25548.087860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27114.337433, 26752.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.589661, 30494.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.931800, 30108.992000, 357.876010, 343.552810, 184.530000, X, Y) && !ellipse(27181.828488, 29376.430400, 322.006409, 322.006409, 0.000000, X, Y) && !ellipse(24172.957916, 26766.002899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19018.015427, 29609.658752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28248.032288, 30412.027191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21811.728851, 23552.246582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28389.744476, 28773.497101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.730200, 24188.249600, 257.124807, 257.124807, 0.000000, X, Y) && !ellipse(21182.283400, 29967.019600, 469.431214, 469.431214, 0.000000, X, Y) && !ellipse(25462.189697, 28563.733856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20282.411000, 21880.377400, 456.061613, 456.061613, 0.000000, X, Y) && !ellipse(27888.482910, 28960.873138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20149.724319, 30585.923645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.801575, 29505.841797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.625600, 23826.063000, 376.060811, 376.060811, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25550.567657, 25625.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.160000, 29475.792000, 1280.584037, 1280.584037, 0.000000, X, Y) && !ellipse(25876.084869, 31475.703613, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23527.530914, 24822.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28294.131561, 29250.223541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.797150, 23423.894501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.059448, 29092.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26040.712616, 21591.496826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23373.666656, 29193.676727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18142.414642, 29069.702789, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:19 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src4.gif
[Sat Jan 28 04:50:28 2012] Mean detx,y = (-1644.21, -4274.48) 
[Sat Jan 28 04:50:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 04:50:59 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 04:51:00 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jan 28 04:51:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jan 28 13:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:45 2012] Using photon index=1.80, rate=0.0744, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src4.arf
[Sat Jan 28 13:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:45 2012] Updating source flux to 8.9e-13