[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (356.3, 232.8) = 0 42 28.17 41 9 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1616.4 +/- 48.7
  Background counts = 39.2
  Rate = 0.03 +/- 0.001

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 6.35'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.819
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 9.60"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src28.ximg exists
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Jan 25 16:12:53 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src28 appears to have run properly
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 1712.970000, observed total counts = 1713.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 38 = 0.088303 pixels
[Wed Jan 25 22:38:36 2012] 1721.414000 total counts/ 564.884000 bgd. counts: snr = 48.660578
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.088303 pixels
  Position = (356.3, 232.7) = 0 42 28.17 41 9 59.5
  Extent = 5.8 (5.4-6.2)" x 4.7 (4.4-5.0)", rotation angle = 353 (340-4) degrees
  Source counts = 1156.5 +/- 41.5
  Background counts = 564.9
  Rate = 0.02 +/- 0.0007
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 5.26"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.771
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 5.26"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src28.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src28.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src28.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 1713.000000, observed total counts = 1713.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 38 = 0.009392 pixels
[Fri Jan 27 00:06:48 2012] 1721.795000 total counts/ 568.995000 bgd. counts: snr = 48.328102
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.009392 pixels
  Position = (356.3, 232.7) = 0 42 28.17 41 9 59.5
  Extent = 5.2 (5.0-5.5)", rotation angle = 0
  Source counts = 1152.8 +/- 41.5
  Background counts = 569.0
  Rate = 0.02 +/- 0.0007
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:21 2012] Counts = 1152.800000, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:21 2012] XMMSAS src. selection expression = ellipse(30952.021200, 20193.413000, 629.466018, 629.466018, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src38_src.reg
[Sat Jan 28 04:46:21 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (320, 196) - (393, 269)
[Sat Jan 28 04:46:21 2012] XMMSAS bgd. selection expression = annulus(30952.021200, 20193.413000, 2098.220060, 4196.440121, X, Y) && !ellipse(30929.529920, 23045.661800, 413.932812, 413.932812, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(30058.035380, 24067.627800, 434.671213, 434.671213, 0.000000, X, Y) && !ellipse(33897.671380, 23295.366600, 532.771215, 532.771215, 0.000000, X, Y) && !ellipse(27193.579600, 22147.205000, 374.391211, 374.391211, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(31639.616400, 24594.021000, 275.948008, 275.948008, 0.000000, X, Y) && !ellipse(33081.584808, 23067.860382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34684.986206, 21189.630264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28144.124600, 24333.061400, 343.597610, 343.597610, 0.000000, X, Y) && !ellipse(27544.730200, 24188.249600, 257.124807, 257.124807, 0.000000, X, Y) && !ellipse(35602.702393, 20720.610046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29148.448303, 24534.010040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.649780, 23533.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26040.712616, 21591.496826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.782043, 17351.308838, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src38.gif
[Sat Jan 28 05:17:20 2012] Mean detx,y = (-5031.60, 5330.81) 
[Sat Jan 28 05:17:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:17:50 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:17:50 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Jan 28 05:17:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.0181, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src38.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 2.3e-13