[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (189.6, 241.9) = 0 43 32.40 41 10 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 883.5 +/- 35.7
  Background counts = 20.1
  Rate = 0.01 +/- 0.0006

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 8.89'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.000
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 10.87"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src45.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src45.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src45.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 15.210382 pixels away
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Thu Jan 26 13:17:26 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.000
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 10.87"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src45.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src45.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src45_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src45.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 976.995000, observed total counts = 977.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 37 = 0.146535 pixels
[Fri Jan 27 00:06:48 2012] 982.640000 total counts/ 329.021000 bgd. counts: snr = 36.034032
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.146535 pixels
  Position = (189.7, 241.9) = 0 43 32.35 41 10 39.1
  Extent = 6.5 (6.1-7.1)", rotation angle = 0
  Source counts = 653.6 +/- 31.3
  Background counts = 329.0
  Rate = 0.01 +/- 0.0005
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:22 2012] XMMSAS src. selection expression = ellipse(16459.704600, 20993.826800, 391.651811, 391.651811, 0.000000, X, Y)
[Sat Jan 28 04:46:22 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src37_src.reg
[Sat Jan 28 04:46:22 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (167, 219) - (212, 264)
[Sat Jan 28 04:46:22 2012] XMMSAS bgd. selection expression = annulus(16459.704600, 20993.826800, 652.753019, 1305.506038, X, Y)
[Sat Jan 28 04:46:22 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src37.gif
[Sat Jan 28 05:38:38 2012] Mean detx,y = (-9282.04, -8550.90) 
[Sat Jan 28 05:38:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:38:44 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:38:44 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Jan 28 05:38:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.0103, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src37.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 2.7e-13