[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (279.1, 247.7) = 0 42 57.92 41 11 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2349.9 +/- 58.7
  Background counts = 39.2
  Rate = 0.05 +/- 0.001

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 3.94'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Wed Jan 25 09:18:43 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.058
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.40"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src21.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src21.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src21.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 2295.890000, observed total counts = 2302.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 36 = 0.179149 pixels
[Wed Jan 25 22:38:36 2012] 2318.270000 total counts/ 673.740000 bgd. counts: snr = 63.357150
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.179149 pixels
  Position = (279.2, 247.5) = 0 42 57.88 41 11 4.3
  Extent = 5.2 (4.9-5.3)", rotation angle = 0
  Source counts = 1644.5 +/- 48.1
  Background counts = 673.7
  Rate = 0.03 +/- 0.0008
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 5.15"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.793
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 5.15"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src21.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src21.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 2306.190000, observed total counts = 2302.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 36 = 0.002397 pixels
[Fri Jan 27 00:06:48 2012] 2328.261000 total counts/ 675.271000 bgd. counts: snr = 63.610847
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.002397 pixels
  Position = (279.2, 247.5) = 0 42 57.88 41 11 4.3
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 1653.0 +/- 48.3
  Background counts = 675.3
  Rate = 0.03 +/- 0.0008
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:21 2012] Counts = 1652.990000, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:21 2012] XMMSAS src. selection expression = ellipse(24241.994900, 21487.562400, 612.732018, 612.732018, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src36_src.reg
[Sat Jan 28 04:46:21 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (244, 212) - (314, 283)
[Sat Jan 28 04:46:21 2012] XMMSAS bgd. selection expression = annulus(24241.994900, 21487.562400, 2042.440059, 4084.880118, X, Y) && !ellipse(21386.017471, 26032.965240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(27193.579600, 22147.205000, 374.391211, 374.391211, 0.000000, X, Y) && !ellipse(20532.749466, 16991.624054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28398.683960, 25548.087860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21811.728851, 23552.246582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23069.203000, 20475.662400, 482.837614, 482.837614, 0.000000, X, Y) && !ellipse(28144.124600, 24333.061400, 343.597610, 343.597610, 0.000000, X, Y) && !ellipse(27544.730200, 24188.249600, 257.124807, 257.124807, 0.000000, X, Y) && !ellipse(20282.411000, 21880.377400, 456.061613, 456.061613, 0.000000, X, Y) && !ellipse(25678.625600, 23826.063000, 376.060811, 376.060811, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29148.448303, 24534.010040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25550.567657, 25625.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.530914, 24822.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.797150, 23423.894501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26040.712616, 21591.496826, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src36.gif
[Sat Jan 28 05:11:33 2012] Mean detx,y = (-6131.12, -1408.14) 
[Sat Jan 28 05:11:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:12:14 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:12:15 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jan 28 05:12:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jan 28 13:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:45 2012] Using photon index=1.80, rate=0.026, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src36.arf
[Sat Jan 28 13:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:45 2012] Updating source flux to 3.5e-13