[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (390.3, 268.1) = 0 42 15.05 41 12 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2678.9 +/- 61.8
  Background counts = 44.2
  Rate = 0.06 +/- 0.001

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 7.02'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.935
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.94"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src20.ximg exists
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Jan 25 16:12:53 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src20 appears to have run properly
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 3246.000000, observed total counts = 3244.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 34 = 0.232100 pixels
[Wed Jan 25 22:38:36 2012] 3206.050000 total counts/ 1039.870000 bgd. counts: snr = 67.174589
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.232100 pixels
  Position = (390.2, 268.3) = 0 42 15.10 41 12 34.3
  Extent = 7.2" x 6.1", rotation angle = 318
  Source counts = 2166.2 +/- 56.6
  Background counts = 1039.9
  Rate = 0.03 +/- 0.0009
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.17
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 6.66"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.969
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 6.66"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src20.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src20.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 3239.280000, observed total counts = 3244.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 34 = 0.014703 pixels
[Fri Jan 27 00:06:48 2012] 3198.740000 total counts/ 1045.090000 bgd. counts: snr = 66.619026
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.014703 pixels
  Position = (390.2, 268.3) = 0 42 15.10 41 12 34.4
  Extent = 6.7 (6.4-6.9)", rotation angle = 0
  Source counts = 2153.7 +/- 56.6
  Background counts = 1045.1
  Rate = 0.03 +/- 0.0009
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:21 2012] Counts = 2153.650000, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:21 2012] XMMSAS src. selection expression = ellipse(33897.671380, 23295.366600, 799.156823, 799.156823, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src34_src.reg
[Sat Jan 28 04:46:21 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (344, 222) - (436, 314)
[Sat Jan 28 04:46:21 2012] XMMSAS bgd. selection expression = annulus(33897.671380, 23295.366600, 2663.856077, 5327.712153, X, Y) && !ellipse(28609.344200, 27458.497200, 1301.052037, 1232.880035, 356.900530, X, Y) && !ellipse(32138.220000, 26890.710000, 319.088809, 319.088809, 0.000000, X, Y) && !ellipse(30268.520000, 27827.378200, 491.272814, 428.071212, 90.000000, X, Y) && !ellipse(30929.529920, 23045.661800, 413.932812, 413.932812, 0.000000, X, Y) && !ellipse(33110.533100, 25020.709000, 372.716011, 372.716011, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(30058.035380, 24067.627800, 434.671213, 434.671213, 0.000000, X, Y) && !ellipse(32475.675262, 27418.192261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30952.021200, 20193.413000, 419.644012, 419.644012, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(27717.122000, 27128.236000, 1174.832034, 926.248027, 47.383900, X, Y) && !ellipse(31639.616400, 24594.021000, 275.948008, 275.948008, 0.000000, X, Y) && !ellipse(28398.683960, 25548.087860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.342468, 27740.319000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32447.139008, 25359.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33081.584808, 23067.860382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34684.986206, 21189.630264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39205.420600, 25814.946240, 402.447212, 402.447212, 0.000000, X, Y) && !ellipse(28389.744476, 28773.497101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29154.031830, 28505.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39504.238004, 24515.992477, 567.603930, 325.971943, 81.222766, X, Y) && !ellipse(27888.482910, 28960.873138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34981.675110, 26404.658722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.702393, 20720.610046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34519.818400, 28158.181200, 664.720819, 664.720819, 0.000000, X, Y) && !ellipse(29148.448303, 24534.010040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.160000, 29475.792000, 1280.584037, 1280.584037, 0.000000, X, Y) && !ellipse(28294.131561, 29250.223541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29754.429535, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.649780, 23533.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.467377, 26834.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.510651, 26230.735718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.782043, 17351.308838, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src34.gif
[Sat Jan 28 05:10:46 2012] Mean detx,y = (-1147.62, 7000.83) 
[Sat Jan 28 05:10:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:11:27 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:11:27 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Jan 28 05:11:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Jan 28 13:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:45 2012] Using photon index=1.80, rate=0.0339, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src34.arf
[Sat Jan 28 13:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:45 2012] Updating source flux to 4.1e-13