[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (319.0, 313.1) = 0 42 42.52 41 15 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3859.0 +/- 81.7
  Background counts = 89.3
  Rate = 0.06 +/- 0.001

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 1.83'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Wed Jan 25 09:18:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.34"
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src17.ximg exists
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Jan 25 16:12:52 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src17 appears to have run properly
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 21262.200000, observed total counts = 20439.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 25 = 5.014437 pixels
[Wed Jan 25 22:38:36 2012] Warning, changing simple spatial fit ID from 17 to 14
[Wed Jan 25 22:38:36 2012] 16964.180000 total counts/ 3560.880000 bgd. counts: snr = 224.612059
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 5.014437 pixels
  Position = (319.4, 318.1) = 0 42 42.38 41 16 11.1
  Extent = 14.7 (14.7-29.4)" x 13.5 (13.5-13.5)", rotation angle = 6 (6-6) degrees
  Source counts = 13403.3 +/- 130.2
  Background counts = 3560.9
  Rate = 0.2 +/- 0.002
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Wed Jan 25 22:38:36 2012] Source is confused with source 22
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 14.07"
[Thu Jan 26 13:17:26 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.004
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 14.07"
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src17.ximg exists
[Thu Jan 26 18:45:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src17.csv
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Jan 26 18:45:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src17.csv
[Thu Jan 26 18:45:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jan 27 00:06:48 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.584245 pixels away
[Fri Jan 27 00:06:48 2012] Source 25 is offset by -8.364000 and 2.451770 pixels which is larger than
2 X fitted extent = 1.601609 x 1.601609, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Source 25 is offset by -1.121816 and -6.573540 pixels which is larger than
2 X fitted extent = 5.850805 x 5.850805, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Source 25 is offset by -9.594874 and -1.401632 pixels which is larger than
2 X fitted extent = 9.577426 x 5.050897, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Sat Jan 28 04:46:20 2012] Counts = 13403.300000, rescaling region sizes by 3.000000
[Sat Jan 28 04:46:20 2012] XMMSAS src. selection expression = ellipse(27738.710000, 27623.310000, 2643.372076, 2421.954070, 6.416000, X, Y)
[Sat Jan 28 04:46:20 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src25_src.reg
[Sat Jan 28 04:46:20 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (167, 166) - (471, 470)
[Sat Jan 28 04:46:21 2012] XMMSAS bgd. selection expression = annulus(27738.710000, 27623.310000, 13216.860380, 26433.720761, X, Y) && !ellipse(28609.344200, 27458.497200, 1301.052037, 1232.880035, 356.900530, X, Y) && !ellipse(32138.220000, 26890.710000, 319.088809, 319.088809, 0.000000, X, Y) && !ellipse(26685.905400, 27915.396400, 480.308014, 480.308014, 0.000000, X, Y) && !ellipse(26390.977000, 26642.133540, 550.903216, 394.977611, 118.958700, X, Y) && !ellipse(23093.036412, 26688.566200, 452.647213, 452.647213, 0.000000, X, Y) && !ellipse(21386.017471, 26032.965240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24924.345900, 27454.583600, 339.450410, 339.450410, 0.000000, X, Y) && !ellipse(30268.520000, 27827.378200, 491.272814, 428.071212, 90.000000, X, Y) && !ellipse(30929.529920, 23045.661800, 413.932812, 413.932812, 0.000000, X, Y) && !ellipse(22507.490600, 28642.546000, 434.552013, 392.565611, 98.079968, X, Y) && !ellipse(25473.484818, 26988.460634, 359.786971, 325.000892, 9.156307, X, Y) && !ellipse(34339.986800, 30517.173000, 466.041613, 371.900811, 230.341000, X, Y) && !ellipse(25474.320600, 30868.774600, 385.363211, 385.363211, 0.000000, X, Y) && !ellipse(27288.310883, 27626.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33110.533100, 25020.709000, 372.716011, 372.716011, 0.000000, X, Y) && !ellipse(23814.979400, 27509.894800, 354.992810, 354.992810, 0.000000, X, Y) && !ellipse(23867.650140, 31371.159800, 406.206412, 406.206412, 0.000000, X, Y) && !ellipse(30058.035380, 24067.627800, 434.671213, 434.671213, 0.000000, X, Y) && !ellipse(33897.671380, 23295.366600, 532.771215, 532.771215, 0.000000, X, Y) && !ellipse(24241.994900, 21487.562400, 408.488012, 408.488012, 0.000000, X, Y) && !ellipse(22915.430800, 29889.633200, 383.604011, 383.604011, 0.000000, X, Y) && !ellipse(27193.579600, 22147.205000, 374.391211, 374.391211, 0.000000, X, Y) && !ellipse(32475.675262, 27418.192261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30810.790600, 13716.638400, 533.158415, 533.158415, 0.000000, X, Y) && !ellipse(26408.216461, 38598.926849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30952.021200, 20193.413000, 419.644012, 419.644012, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(15354.090927, 25873.166992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27717.122000, 27128.236000, 1174.832034, 926.248027, 47.383900, X, Y) && !ellipse(30267.409200, 31762.047800, 388.977611, 388.977611, 0.000000, X, Y) && !ellipse(35540.569397, 30165.502411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34570.060608, 29779.684174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20532.749466, 16991.624054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19531.070633, 32507.710846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16016.453033, 24238.207916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.407200, 25890.182600, 295.434409, 295.434409, 0.000000, X, Y) && !ellipse(31639.616400, 24594.021000, 275.948008, 275.948008, 0.000000, X, Y) && !ellipse(22191.156433, 29983.603699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28398.683960, 25548.087860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11663.893956, 28520.397275, 659.698043, 277.225651, 98.951442, X, Y) && !ellipse(27114.337433, 26752.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.342468, 27740.319000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16459.704600, 20993.826800, 522.202415, 522.202415, 0.000000, X, Y) && !ellipse(24852.589661, 30494.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35286.538849, 33177.394196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.931800, 30108.992000, 357.876010, 343.552810, 184.530000, X, Y) && !ellipse(27181.828488, 29376.430400, 322.006409, 322.006409, 0.000000, X, Y) && !ellipse(31430.715520, 31285.005200, 378.335211, 378.335211, 0.000000, X, Y) && !ellipse(35159.166473, 29527.145752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24172.957916, 26766.002899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19018.015427, 29609.658752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32447.139008, 25359.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33081.584808, 23067.860382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34684.986206, 21189.630264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28248.032288, 30412.027191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21811.728851, 23552.246582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31409.803131, 39244.611389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17215.178848, 17465.917160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29371.143700, 32298.739800, 384.794411, 310.752009, 23.747500, X, Y) && !ellipse(23069.203000, 20475.662400, 482.837614, 482.837614, 0.000000, X, Y) && !ellipse(39205.420600, 25814.946240, 402.447212, 402.447212, 0.000000, X, Y) && !ellipse(28144.124600, 24333.061400, 343.597610, 343.597610, 0.000000, X, Y) && !ellipse(33837.137115, 32812.184296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.822000, 39231.598800, 1927.832055, 478.452014, 187.732000, X, Y) && !ellipse(28389.744476, 28773.497101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29154.031830, 28505.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17460.985443, 30396.328003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41056.167084, 33799.446320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.730200, 24188.249600, 257.124807, 257.124807, 0.000000, X, Y) && !ellipse(21182.283400, 29967.019600, 469.431214, 469.431214, 0.000000, X, Y) && !ellipse(25462.189697, 28563.733856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20282.411000, 21880.377400, 456.061613, 456.061613, 0.000000, X, Y) && !ellipse(38667.578973, 17098.225014, 618.706850, 402.393804, 97.913010, X, Y) && !ellipse(39504.238004, 24515.992477, 567.603930, 325.971943, 81.222766, X, Y) && !ellipse(27912.156000, 33471.104600, 303.993609, 303.993609, 0.000000, X, Y) && !ellipse(22086.194400, 32613.082400, 1220.296035, 523.360015, 297.007988, X, Y) && !ellipse(27888.482910, 28960.873138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35584.592438, 13771.491684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20149.724319, 30585.923645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29641.280151, 34368.219971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.801575, 29505.841797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32710.148865, 40229.433441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34981.675110, 26404.658722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.702393, 20720.610046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30684.842072, 43083.268677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20055.243774, 12743.332916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27328.178802, 41986.526520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.625600, 23826.063000, 376.060811, 376.060811, 0.000000, X, Y) && !ellipse(41544.012787, 31289.482513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.379211, 39345.130798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34519.818400, 28158.181200, 664.720819, 664.720819, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29148.448303, 24534.010040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33875.069519, 29810.917938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25550.567657, 25625.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17038.550369, 17802.844360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.160000, 29475.792000, 1280.584037, 1280.584037, 0.000000, X, Y) && !ellipse(29895.841705, 12373.555038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.084869, 31475.703613, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23527.530914, 24822.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28294.131561, 29250.223541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29754.429535, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.797150, 23423.894501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26737.179901, 33766.290314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.059448, 29092.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.649780, 23533.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26040.712616, 21591.496826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23373.666656, 29193.676727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15472.842422, 18040.178757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.467377, 26834.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.510651, 26230.735718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43676.261505, 29532.166412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.782043, 17351.308838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39462.974274, 33706.188416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18142.414642, 29069.702789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12351.720078, 33775.633362, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src25.gif
[Sat Jan 28 05:00:20 2012] Mean detx,y = (616.08, -228.30) 
[Sat Jan 28 05:00:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:09:09 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:09:10 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jan 28 05:09:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jan 28 13:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:45 2012] Using photon index=1.80, rate=0.211, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src25.arf
[Sat Jan 28 13:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:45 2012] Updating source flux to 1.7e-12
[Sat Jan 28 13:51:56 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Sat Jan 28 13:51:56 2012] Flag c found in src. 25 procflags, skipping spectral fitting