[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (397.9, 342.9) = 0 42 12.07 41 17 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1138.1 +/- 42.3
  Background counts = 34.1
  Rate = 0.02 +/- 0.0009

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 7.90'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.081
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 10.38"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src34.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src34.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src34_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src34.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning, spatial fit 34 centroid is now closest to src. 17
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:36 2012] Source is confused with source 50
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Thu Jan 26 13:17:26 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.081
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 10.38"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src34.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src34.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src34_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src34.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Jan 27 00:06:48 2012] Warning, spatial fit 34 centroid is now closest to src. 17
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:22 2012] Counts = 1138.086914, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:22 2012] XMMSAS src. selection expression = ellipse(34570.060608, 29779.684174, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:22 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src19_src.reg
[Sat Jan 28 04:46:22 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (323, 268) - (473, 418)
[Sat Jan 28 04:46:22 2012] XMMSAS bgd. selection expression = annulus(34570.060608, 29779.684174, 4350.000000, 8700.000000, X, Y) && !ellipse(28609.344200, 27458.497200, 1301.052037, 1232.880035, 356.900530, X, Y) && !ellipse(32138.220000, 26890.710000, 319.088809, 319.088809, 0.000000, X, Y) && !ellipse(26685.905400, 27915.396400, 480.308014, 480.308014, 0.000000, X, Y) && !ellipse(26390.977000, 26642.133540, 550.903216, 394.977611, 118.958700, X, Y) && !ellipse(30268.520000, 27827.378200, 491.272814, 428.071212, 90.000000, X, Y) && !ellipse(30929.529920, 23045.661800, 413.932812, 413.932812, 0.000000, X, Y) && !ellipse(34339.986800, 30517.173000, 466.041613, 371.900811, 230.341000, X, Y) && !ellipse(27288.310883, 27626.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33110.533100, 25020.709000, 372.716011, 372.716011, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(30058.035380, 24067.627800, 434.671213, 434.671213, 0.000000, X, Y) && !ellipse(33897.671380, 23295.366600, 532.771215, 532.771215, 0.000000, X, Y) && !ellipse(27193.579600, 22147.205000, 374.391211, 374.391211, 0.000000, X, Y) && !ellipse(32475.675262, 27418.192261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.216461, 38598.926849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(27717.122000, 27128.236000, 1174.832034, 926.248027, 47.383900, X, Y) && !ellipse(30267.409200, 31762.047800, 388.977611, 388.977611, 0.000000, X, Y) && !ellipse(35540.569397, 30165.502411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.407200, 25890.182600, 295.434409, 295.434409, 0.000000, X, Y) && !ellipse(31639.616400, 24594.021000, 275.948008, 275.948008, 0.000000, X, Y) && !ellipse(28398.683960, 25548.087860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27114.337433, 26752.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.342468, 27740.319000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35286.538849, 33177.394196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.931800, 30108.992000, 357.876010, 343.552810, 184.530000, X, Y) && !ellipse(27181.828488, 29376.430400, 322.006409, 322.006409, 0.000000, X, Y) && !ellipse(31430.715520, 31285.005200, 378.335211, 378.335211, 0.000000, X, Y) && !ellipse(35159.166473, 29527.145752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32447.139008, 25359.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33081.584808, 23067.860382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34684.986206, 21189.630264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28248.032288, 30412.027191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31409.803131, 39244.611389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29371.143700, 32298.739800, 384.794411, 310.752009, 23.747500, X, Y) && !ellipse(39205.420600, 25814.946240, 402.447212, 402.447212, 0.000000, X, Y) && !ellipse(28144.124600, 24333.061400, 343.597610, 343.597610, 0.000000, X, Y) && !ellipse(33837.137115, 32812.184296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.822000, 39231.598800, 1927.832055, 478.452014, 187.732000, X, Y) && !ellipse(28389.744476, 28773.497101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29154.031830, 28505.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41056.167084, 33799.446320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.730200, 24188.249600, 257.124807, 257.124807, 0.000000, X, Y) && !ellipse(25462.189697, 28563.733856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39504.238004, 24515.992477, 567.603930, 325.971943, 81.222766, X, Y) && !ellipse(27912.156000, 33471.104600, 303.993609, 303.993609, 0.000000, X, Y) && !ellipse(27888.482910, 28960.873138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29641.280151, 34368.219971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.801575, 29505.841797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34981.675110, 26404.658722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.702393, 20720.610046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.625600, 23826.063000, 376.060811, 376.060811, 0.000000, X, Y) && !ellipse(41544.012787, 31289.482513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34519.818400, 28158.181200, 664.720819, 664.720819, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29148.448303, 24534.010040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33875.069519, 29810.917938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25550.567657, 25625.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.160000, 29475.792000, 1280.584037, 1280.584037, 0.000000, X, Y) && !ellipse(25876.084869, 31475.703613, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28294.131561, 29250.223541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29754.429535, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26737.179901, 33766.290314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.649780, 23533.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26040.712616, 21591.496826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.467377, 26834.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.510651, 26230.735718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43676.261505, 29532.166412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39462.974274, 33706.188416, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:22 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src19.gif
[Sat Jan 28 05:28:47 2012] Mean detx,y = (5518.33, 5270.15) 
[Sat Jan 28 05:28:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:30:31 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:30:31 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jan 28 05:30:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Jan 28 07:32:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 07:32:06 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.0232, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src19.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 2.6e-13
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting