[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (264.0, 344.1) = 0 43 3.74 41 18 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2164.0 +/- 57.2
  Background counts = 56.9
  Rate = 0.05 +/- 0.001

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 4.14'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.50"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src23.ximg exists
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Jan 25 16:12:53 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src23 appears to have run properly
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 3039.390000, observed total counts = 3046.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 18 = 0.100130 pixels
[Wed Jan 25 22:38:36 2012] 2679.420000 total counts/ 1254.220000 bgd. counts: snr = 40.242871
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.100130 pixels
  Position = (264.0, 344.1) = 0 43 3.78 41 18 4.4
  Extent = 4.8 (4.6-5.0)", rotation angle = 0
  Source counts = 1425.2 +/- 51.8
  Background counts = 1254.2
  Rate = 0.02 +/- 0.0008
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 4.81"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.164
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 4.81"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src23.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src23.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 3046.000000, observed total counts = 3046.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 18 = 0.006770 pixels
[Fri Jan 27 00:06:48 2012] 2686.740000 total counts/ 1258.090000 bgd. counts: snr = 40.278194
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.006770 pixels
  Position = (264.0, 344.1) = 0 43 3.78 41 18 4.4
  Extent = 4.8 (4.6-5.0)", rotation angle = 0
  Source counts = 1428.7 +/- 51.8
  Background counts = 1258.1
  Rate = 0.02 +/- 0.0008
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:21 2012] Counts = 1428.650000, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:21 2012] XMMSAS src. selection expression = ellipse(22915.430800, 29889.633200, 575.406017, 575.406017, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src18_src.reg
[Sat Jan 28 04:46:21 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (231, 311) - (297, 377)
[Sat Jan 28 04:46:21 2012] XMMSAS bgd. selection expression = annulus(22915.430800, 29889.633200, 1918.020055, 3836.040110, X, Y) && !ellipse(26685.905400, 27915.396400, 480.308014, 480.308014, 0.000000, X, Y) && !ellipse(26390.977000, 26642.133540, 550.903216, 394.977611, 118.958700, X, Y) && !ellipse(23093.036412, 26688.566200, 452.647213, 452.647213, 0.000000, X, Y) && !ellipse(21386.017471, 26032.965240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24924.345900, 27454.583600, 339.450410, 339.450410, 0.000000, X, Y) && !ellipse(22507.490600, 28642.546000, 434.552013, 392.565611, 98.079968, X, Y) && !ellipse(25473.484818, 26988.460634, 359.786971, 325.000892, 9.156307, X, Y) && !ellipse(25474.320600, 30868.774600, 385.363211, 385.363211, 0.000000, X, Y) && !ellipse(27288.310883, 27626.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.979400, 27509.894800, 354.992810, 354.992810, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(23867.650140, 31371.159800, 406.206412, 406.206412, 0.000000, X, Y) && !ellipse(27717.122000, 27128.236000, 1174.832034, 926.248027, 47.383900, X, Y) && !ellipse(19531.070633, 32507.710846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22191.156433, 29983.603699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27114.337433, 26752.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.589661, 30494.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.931800, 30108.992000, 357.876010, 343.552810, 184.530000, X, Y) && !ellipse(24172.957916, 26766.002899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19018.015427, 29609.658752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21182.283400, 29967.019600, 469.431214, 469.431214, 0.000000, X, Y) && !ellipse(25462.189697, 28563.733856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22086.194400, 32613.082400, 1220.296035, 523.360015, 297.007988, X, Y) && !ellipse(20149.724319, 30585.923645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.801575, 29505.841797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25550.567657, 25625.659851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.084869, 31475.703613, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26737.179901, 33766.290314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.059448, 29092.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23373.666656, 29193.676727, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:21 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src18.gif
[Sat Jan 28 05:12:21 2012] Mean detx,y = (1282.05, -5555.08) 
[Sat Jan 28 05:12:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:12:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:12:51 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jan 28 05:12:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jan 28 13:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:45 2012] Using photon index=1.80, rate=0.0225, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src18.arf
[Sat Jan 28 13:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:45 2012] Updating source flux to 3e-13