[Wed Jan 25 01:02:51 2012] Detection parameters:
  Position = (395.5, 351.2) = 0 42 13.00 41 18 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3691.5 +/- 73.1
  Background counts = 32.9
  Rate = 0.08 +/- 0.002

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 8.01'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.893
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.43"
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src12.ximg exists
[Wed Jan 25 16:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src12.csv
[Wed Jan 25 16:12:52 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Jan 25 16:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src12.csv
[Wed Jan 25 16:12:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning, spatial fit 12 centroid is now closest to src. 50
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 2220.320000, observed total counts = 2214.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 16 = 0.599330 pixels
[Wed Jan 25 22:38:36 2012] Warning, changing simple spatial fit ID from 12 to 99
[Wed Jan 25 22:38:36 2012] 2089.663000 total counts/ 910.923000 bgd. counts: snr = 39.055049
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.599330 pixels
  Position = (395.6, 351.8) = 0 42 12.95 41 18 37.3
  Extent = 5.5 (5.1-6.3)", rotation angle = 0
  Source counts = 1178.7 +/- 45.7
  Background counts = 910.9
  Rate = 0.02 +/- 0.0007
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 5.51"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.960
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 5.51"
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src12.ximg exists
[Thu Jan 26 18:45:13 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Jan 26 18:45:13 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src12 appears to have run properly
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Jan 26 18:45:15 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 3951.450000, observed total counts = 3941.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 16 = 0.562575 pixels
[Fri Jan 27 00:06:48 2012] 3872.310000 total counts/ 1307.360000 bgd. counts: snr = 70.938387
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.562575 pixels
  Position = (395.3, 351.3) = 0 42 13.09 41 18 35.4
  Extent = 5.8 (5.6-6.1)" x 4.6 (4.5-4.9)", rotation angle = 230 (223-238) degrees
  Source counts = 2564.9 +/- 62.2
  Background counts = 1307.4
  Rate = 0.04 +/- 0.001
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Sat Jan 28 04:46:20 2012] Counts = 2564.950000, rescaling region sizes by 2.000000
[Sat Jan 28 04:46:20 2012] XMMSAS src. selection expression = ellipse(34339.986800, 30517.173000, 699.062420, 557.851216, 230.341000, X, Y)
[Sat Jan 28 04:46:20 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src16_src.reg
[Sat Jan 28 04:46:20 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (355, 311) - (435, 392)
[Sat Jan 28 04:46:20 2012] XMMSAS bgd. selection expression = annulus(34339.986800, 30517.173000, 2330.208067, 4660.416134, X, Y) && !ellipse(28609.344200, 27458.497200, 1301.052037, 1232.880035, 356.900530, X, Y) && !ellipse(32138.220000, 26890.710000, 319.088809, 319.088809, 0.000000, X, Y) && !ellipse(30268.520000, 27827.378200, 491.272814, 428.071212, 90.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(32475.675262, 27418.192261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(30267.409200, 31762.047800, 388.977611, 388.977611, 0.000000, X, Y) && !ellipse(35540.569397, 30165.502411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34570.060608, 29779.684174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.342468, 27740.319000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35286.538849, 33177.394196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31430.715520, 31285.005200, 378.335211, 378.335211, 0.000000, X, Y) && !ellipse(35159.166473, 29527.145752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32447.139008, 25359.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29371.143700, 32298.739800, 384.794411, 310.752009, 23.747500, X, Y) && !ellipse(39205.420600, 25814.946240, 402.447212, 402.447212, 0.000000, X, Y) && !ellipse(33837.137115, 32812.184296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29154.031830, 28505.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29641.280151, 34368.219971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34981.675110, 26404.658722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34519.818400, 28158.181200, 664.720819, 664.720819, 0.000000, X, Y) && !ellipse(33875.069519, 29810.917938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.160000, 29475.792000, 1280.584037, 1280.584037, 0.000000, X, Y) && !ellipse(29754.429535, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.467377, 26834.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.510651, 26230.735718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39462.974274, 33706.188416, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:20 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src16.gif
[Sat Jan 28 04:55:25 2012] Mean detx,y = (5798.04, 4957.59) 
[Sat Jan 28 04:55:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 04:56:03 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 04:56:03 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jan 28 04:56:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Jan 28 13:51:43 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:43 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jan 28 13:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:45 2012] Using photon index=1.80, rate=0.0403, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src16.arf
[Sat Jan 28 13:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:45 2012] Updating source flux to 5.1e-13