[Wed Jan 25 01:02:53 2012] Detection parameters:
  Position = (317.2, 278.9) = 0 42 43.24 41 13 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 270.5 +/- 24.2
  Background counts = 81.2
  Rate = 0.005 +/- 0.0004

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 1.96'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Wed Jan 25 09:18:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 7.41"
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src71.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src71.csv
[Wed Jan 25 16:12:53 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src71_1.ximg exists
[Wed Jan 25 16:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src71.csv
[Wed Jan 25 16:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning, spatial fit 71 centroid is now closest to src. 72
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:36 2012] Source is confused with source 72
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 7.41"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src70.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src70.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src70_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src70.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Fri Jan 27 00:06:48 2012] Spatial fit model total counts = 1518.000000, observed total counts = 1518.000000
[Fri Jan 27 00:06:48 2012] Offset between fit and detection position for source 133 = 0.275957 pixels
[Fri Jan 27 00:06:48 2012] 1284.268000 total counts/ 1162.060000 bgd. counts: snr = 3.584969
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 0.275957 pixels
  Position = (317.2, 278.6) = 0 42 43.25 41 13 19.3
  Extent = 3.2 (2.7-4.0)", rotation angle = 0
  Source counts = 122.2 +/- 35.8
  Background counts = 1162.1
  Rate = 0.002 +/- 0.0006
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:23 2012] XMMSAS src. selection expression = ellipse(27544.730200, 24188.249600, 192.843606, 192.843606, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src133_src.reg
[Sat Jan 28 04:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (306, 268) - (328, 290)
[Sat Jan 28 04:46:23 2012] XMMSAS bgd. selection expression = annulus(27544.730200, 24188.249600, 321.406009, 642.812018, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(28398.683960, 25548.087860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28144.124600, 24333.061400, 343.597610, 343.597610, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:23 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src133.gif
[Sat Jan 28 05:47:07 2012] Mean detx,y = (-2463.92, 749.18) 
[Sat Jan 28 05:47:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:47:17 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:47:18 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src133_src_b10.pi.gz
[Sat Jan 28 05:47:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src133_bgd.pi.gz
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src133_src_b10.pi.gz
[Sat Jan 28 13:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:46 2012] Using photon index=1.80, rate=0.00192, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src133.arf
[Sat Jan 28 13:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:46 2012] Updating source flux to 2.9e-14
[Sat Jan 28 13:51:56 2012] Flag c found in src. 133 procflags, skipping spectral fitting