[Wed Jan 25 01:02:53 2012] Detection parameters:
  Position = (335.6, 282.6) = 0 42 36.14 41 13 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.8 +/- 21.5
  Background counts = 82.7
  Rate = 0.003 +/- 0.0004

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 2.93'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Wed Jan 25 09:18:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 23, frac = 1.073
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 97 for pass 0, mean size = 7.89"
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src97.ximg exists
[Wed Jan 25 16:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src97.csv
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src97_1.ximg exists
[Wed Jan 25 16:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src97.csv
[Wed Jan 25 16:12:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Wed Jan 25 16:12:56 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src97 appears to have run properly
[Wed Jan 25 22:38:36 2012] Source 131 is offset by -7.661261 and 4.962966 pixels which is larger than
2 X fitted extent = 3.248216 x 3.248216, not incorporating fit results
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.8, npix_max = 21, mask sum = 23, frac = 1.073
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 96 for pass 1, mean size = 7.89"
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src96.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src96.csv
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src96_1.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src96.csv
[Thu Jan 26 18:45:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src96 appears to have run properly
[Fri Jan 27 00:06:48 2012] Source 131 is offset by -7.661261 and 4.949610 pixels which is larger than
2 X fitted extent = 3.248506 x 3.248506, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:24 2012] XMMSAS src. selection expression = ellipse(29148.448303, 24534.010040, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src131_src.reg
[Sat Jan 28 04:46:24 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (298, 245) - (373, 320)
[Sat Jan 28 04:46:24 2012] XMMSAS bgd. selection expression = annulus(29148.448303, 24534.010040, 1087.500000, 2175.000000, X, Y) && !ellipse(28609.344200, 27458.497200, 1301.052037, 1232.880035, 356.900530, X, Y) && !ellipse(30929.529920, 23045.661800, 413.932812, 413.932812, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(30058.035380, 24067.627800, 434.671213, 434.671213, 0.000000, X, Y) && !ellipse(27193.579600, 22147.205000, 374.391211, 374.391211, 0.000000, X, Y) && !ellipse(32087.496000, 24577.481000, 1420.936041, 1420.936041, 0.000000, X, Y) && !ellipse(27717.122000, 27128.236000, 1174.832034, 926.248027, 47.383900, X, Y) && !ellipse(27759.407200, 25890.182600, 295.434409, 295.434409, 0.000000, X, Y) && !ellipse(28398.683960, 25548.087860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27114.337433, 26752.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28144.124600, 24333.061400, 343.597610, 343.597610, 0.000000, X, Y) && !ellipse(27544.730200, 24188.249600, 257.124807, 257.124807, 0.000000, X, Y) && !ellipse(27155.068237, 25116.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29754.429535, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.467377, 26834.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.510651, 26230.735718, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src131.gif
[Sat Jan 28 05:54:41 2012] Mean detx,y = (-1587.70, 2119.54) 
[Sat Jan 28 05:54:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:54:56 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:54:56 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src131_src_b10.pi.gz
[Sat Jan 28 05:54:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src131_bgd.pi.gz
[Sat Jan 28 08:39:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 08:39:15 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:45 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src131_src_b10.pi.gz
[Sat Jan 28 13:51:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:47 2012] Using photon index=1.80, rate=0.00264, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src131.arf
[Sat Jan 28 13:51:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:47 2012] Updating source flux to 2.6e-14
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting