[Wed Jan 25 01:02:53 2012] Detection parameters:
  Position = (398.2, 324.0) = 0 42 11.96 41 16 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 14.6
  Background counts = 38.0
  Rate = 0.003 +/- 0.0004

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 7.47'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.3, npix_max = 32, mask sum = 25, frac = 0.777
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 95 for pass 0, mean size = 10.16"
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src95.ximg exists
[Wed Jan 25 16:12:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src95.csv
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src95_1.ximg exists
[Wed Jan 25 16:12:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src95.csv
[Wed Jan 25 16:12:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Wed Jan 25 16:12:56 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Wed Jan 25 22:38:36 2012] Spatial fit model total counts = 416.357000, observed total counts = 417.000000
[Wed Jan 25 22:38:36 2012] Offset between fit and detection position for source 117 = 0.920989 pixels
[Wed Jan 25 22:38:36 2012] 396.981000 total counts/ 286.005000 bgd. counts: snr = 6.562091
Spatial fit parameters:
  Offset between fit and detection position for source 117 = 0.920989 pixels
  Position = (397.3, 324.2) = 0 42 12.31 41 16 37.4
  Extent = 8.3 (6.9-10.2)", rotation angle = 0
  Source counts = 111.0 +/- 19.9
  Background counts = 286.0
  Rate = 0.002 +/- 0.0003
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.861
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 94 for pass 1, mean size = 8.31"
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src94.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src94.csv
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src94_1.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src94.csv
[Thu Jan 26 18:45:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src94.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src94_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src94 appears to have run properly
[Fri Jan 27 00:06:48 2012] Warning, spatial fit 94 centroid is now closest to src. 102
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:24 2012] XMMSAS src. selection expression = ellipse(34519.818400, 28158.181200, 498.540614, 498.540614, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src117_src.reg
[Sat Jan 28 04:46:24 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (369, 296) - (426, 353)
[Sat Jan 28 04:46:24 2012] XMMSAS bgd. selection expression = annulus(34519.818400, 28158.181200, 830.901024, 1661.802048, X, Y) && !ellipse(32475.675262, 27418.192261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35540.569397, 30165.502411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34570.060608, 29779.684174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35159.166473, 29527.145752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34981.675110, 26404.658722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33875.069519, 29810.917938, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src117.gif
[Sat Jan 28 05:54:08 2012] Mean detx,y = (3667.80, 5889.48) 
[Sat Jan 28 05:54:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:54:22 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:54:22 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src117_src_b10.pi.gz
[Sat Jan 28 05:54:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src117_bgd.pi.gz
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src117_src_b10.pi.gz
[Sat Jan 28 13:51:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:47 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src117.arf
[Sat Jan 28 13:51:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:47 2012] Updating source flux to 2.5e-14