[Wed Jan 25 01:02:53 2012] Detection parameters:
  Position = (321.1, 333.4) = 0 42 41.72 41 17 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.1 +/- 26.4
  Background counts = 73.4
  Rate = 0.004 +/- 0.0005

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 3.02'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Wed Jan 25 09:18:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.740
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 7.94"
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src80.ximg exists
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src80_1.ximg exists
[Wed Jan 25 16:12:54 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src80 appears to have run properly
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Wed Jan 25 16:12:55 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Wed Jan 25 16:12:55 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Wed Jan 25 22:38:36 2012] Source 110 is offset by 7.416355 and -4.792378 pixels which is larger than
2 X fitted extent = 1.645687 x 1.645687, not incorporating fit results
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 22:38:36 2012] Source is confused with source 113
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Thu Jan 26 13:17:26 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.740
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 7.94"
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src79.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src79.csv
[Thu Jan 26 18:45:14 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src79_1.ximg exists
[Thu Jan 26 18:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src79.csv
[Thu Jan 26 18:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Thu Jan 26 18:45:16 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Fri Jan 27 00:06:48 2012] Source 110 is offset by 1.463013 and 6.742680 pixels which is larger than
2 X fitted extent = 3.785963 x 3.785963, not incorporating fit results
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:24 2012] XMMSAS src. selection expression = ellipse(27888.482910, 28960.873138, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src110_src.reg
[Sat Jan 28 04:46:24 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (284, 296) - (359, 371)
[Sat Jan 28 04:46:24 2012] XMMSAS bgd. selection expression = annulus(27888.482910, 28960.873138, 1087.500000, 2175.000000, X, Y) && !ellipse(28609.344200, 27458.497200, 1301.052037, 1232.880035, 356.900530, X, Y) && !ellipse(26685.905400, 27915.396400, 480.308014, 480.308014, 0.000000, X, Y) && !ellipse(26390.977000, 26642.133540, 550.903216, 394.977611, 118.958700, X, Y) && !ellipse(30268.520000, 27827.378200, 491.272814, 428.071212, 90.000000, X, Y) && !ellipse(25473.484818, 26988.460634, 359.786971, 325.000892, 9.156307, X, Y) && !ellipse(25474.320600, 30868.774600, 385.363211, 385.363211, 0.000000, X, Y) && !ellipse(27288.310883, 27626.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.710000, 27623.310000, 3524.496101, 3229.272093, 6.416000, X, Y) && !ellipse(27717.122000, 27128.236000, 1174.832034, 926.248027, 47.383900, X, Y) && !ellipse(27114.337433, 26752.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.342468, 27740.319000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.589661, 30494.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.931800, 30108.992000, 357.876010, 343.552810, 184.530000, X, Y) && !ellipse(27181.828488, 29376.430400, 322.006409, 322.006409, 0.000000, X, Y) && !ellipse(28248.032288, 30412.027191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28389.744476, 28773.497101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29154.031830, 28505.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25462.189697, 28563.733856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.801575, 29505.841797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.160000, 29475.792000, 1280.584037, 1280.584037, 0.000000, X, Y) && !ellipse(25876.084869, 31475.703613, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28294.131561, 29250.223541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.510651, 26230.735718, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src110.gif
[Sat Jan 28 05:49:31 2012] Mean detx,y = (2006.52, -552.28) 
[Sat Jan 28 05:49:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:49:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:49:43 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Sat Jan 28 05:49:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src110_bgd.pi.gz
[Sat Jan 28 08:32:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 08:32:06 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:44 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Sat Jan 28 13:51:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:47 2012] Using photon index=1.80, rate=0.00371, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src110.arf
[Sat Jan 28 13:51:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:47 2012] Updating source flux to 3.7e-14
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting