[Wed Jan 25 01:02:53 2012] Detection parameters:
  Position = (389.9, 343.2) = 0 42 15.15 41 18 0.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.3 +/- 17.4
  Background counts = 36.9
  Rate = 0.003 +/- 0.0003

[Wed Jan 25 01:02:54 2012] Off-axis axis estimate = 7.38'
[Wed Jan 25 09:18:43 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 09:18:43 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Wed Jan 25 09:18:43 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.126
[Wed Jan 25 09:18:43 2012] Giving source the simple spatial ID 99 for pass 0, mean size = 10.12"
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src99.ximg exists
[Wed Jan 25 16:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src99.csv
[Wed Jan 25 16:12:54 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src99_1.ximg exists
[Wed Jan 25 16:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src99.csv
[Wed Jan 25 16:12:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Wed Jan 25 16:12:56 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Wed Jan 25 16:12:56 2012] Fit fullrun_mos1_xmm0112570101_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Wed Jan 25 22:38:36 2012] Warning, spatial fit 99 centroid is now closest to src. 16
[Wed Jan 25 22:38:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 22:38:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 22:38:36 2012] Assessing source extent using major
[Wed Jan 25 22:38:36 2012] Source does appear to be extended
[Wed Jan 25 22:38:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:17:26 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:17:26 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Thu Jan 26 13:17:26 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.126
[Thu Jan 26 13:17:26 2012] Giving source the simple spatial ID 98 for pass 1, mean size = 10.12"
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src98.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src98.csv
[Thu Jan 26 18:45:15 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src98_1.ximg exists
[Thu Jan 26 18:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src98.csv
[Thu Jan 26 18:45:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src98.ximg exists
[Thu Jan 26 18:45:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src98.csv
[Thu Jan 26 18:45:16 2012] fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src98_1.ximg exists
[Thu Jan 26 18:45:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src98.csv
[Thu Jan 26 18:45:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570101_pi300-10000_cl_pass1_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:06:48 2012] Warning: source 94 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 102 at 10.586411 pixels away
[Fri Jan 27 00:06:48 2012] Warning: source 98 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 102 at 10.888088 pixels away
[Fri Jan 27 00:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:06:48 2012] Assessing source extent using major
[Fri Jan 27 00:06:48 2012] Source does appear to be extended
[Fri Jan 27 00:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 04:46:24 2012] XMMSAS src. selection expression = ellipse(33875.069519, 29810.917938, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing source region out to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src102_src.reg
[Sat Jan 28 04:46:24 2012] Extracting stamp from image fullrun_mos1_xmm0112570101_pi300-10000_cl_sm2.00.img.gz, (352, 306) - (427, 381)
[Sat Jan 28 04:46:24 2012] XMMSAS bgd. selection expression = annulus(33875.069519, 29810.917938, 1087.500000, 2175.000000, X, Y) && !ellipse(34339.986800, 30517.173000, 466.041613, 371.900811, 230.341000, X, Y) && !ellipse(32475.675262, 27418.192261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35540.569397, 30165.502411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34570.060608, 29779.684174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31430.715520, 31285.005200, 378.335211, 378.335211, 0.000000, X, Y) && !ellipse(35159.166473, 29527.145752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33837.137115, 32812.184296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34519.818400, 28158.181200, 664.720819, 664.720819, 0.000000, X, Y) && !ellipse(31012.467377, 26834.385834, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 04:46:24 2012] Writing fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src102.gif
[Sat Jan 28 05:55:02 2012] Mean detx,y = (5141.92, 4944.86) 
[Sat Jan 28 05:55:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:55:27 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:55:27 2012] Setting source spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sat Jan 28 05:55:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Sat Jan 28 08:39:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 08:39:17 2012] rmf not generated due to insufficient counts
[Sat Jan 28 13:51:45 2012] Updating aperture counts using extracted products
[Sat Jan 28 13:51:45 2012] Error reading totcts from fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sat Jan 28 13:51:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 13:51:47 2012] Using photon index=1.80, rate=0.00254, arf fullrun_mos1_xmm0112570101_pi300-10000_pass1_cl_src102.arf
[Sat Jan 28 13:51:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 13:51:47 2012] Updating source flux to 3.1e-14
[Sat Jan 28 13:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting