[Fri Jun  8 01:55:55 2012] Detection parameters:
  Position = (215.5, 385.9) = 10 44 57.00 -59 38 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.6 +/- 24.4
  Background counts = 137.5
  Rate = 0.01 +/- 0.001

[Fri Jun  8 01:55:57 2012] Off-axis axis estimate = 8.74'
[Fri Jun  8 02:01:55 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 02:01:55 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Fri Jun  8 02:01:55 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Fri Jun  8 02:01:55 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 10.80"
[Fri Jun  8 06:37:59 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src64.ximg exists
[Fri Jun  8 06:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src64.csv
[Fri Jun  8 06:37:59 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src64_1.ximg exists
[Fri Jun  8 06:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src64.csv
[Fri Jun  8 06:37:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 06:38:01 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Fri Jun  8 06:38:01 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Fri Jun  8 06:38:01 2012] Fit fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Fri Jun  8 14:17:15 2012] Warning, spatial fit 64 centroid is now closest to src. 131
[Fri Jun  8 14:17:15 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 14:17:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 14:17:15 2012] Assessing source extent using major
[Fri Jun  8 14:17:15 2012] Source does appear to be extended
[Fri Jun  8 14:17:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 14:18:44 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 14:18:44 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Fri Jun  8 14:18:44 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Fri Jun  8 14:18:44 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 10.80"
[Fri Jun  8 19:56:50 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src62.ximg exists
[Fri Jun  8 19:56:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src62.csv
[Fri Jun  8 19:56:50 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri Jun  8 19:56:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src62.csv
[Fri Jun  8 19:56:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 19:56:52 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri Jun  8 19:56:52 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Jun  8 19:56:52 2012] Fit fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Sat Jun  9 02:54:58 2012] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 12.928297 pixels away
[Sat Jun  9 02:54:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 02:54:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 02:54:58 2012] Assessing source extent using major
[Sat Jun  9 02:54:58 2012] Source does appear to be extended
[Sat Jun  9 02:54:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 02:55:55 2012] XMMSAS src. selection expression = ellipse(18701.993927, 33528.219147, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  9 02:55:55 2012] Writing source region out to fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src68_src.reg
[Sat Jun  9 02:55:55 2012] Extracting stamp from image fullrun_pn_xmm0112560301_pi300-10000_cl_sm2.00.img.gz, (178, 348) - (253, 423)
[Sat Jun  9 02:55:55 2012] XMMSAS bgd. selection expression = annulus(18701.993927, 33528.219147, 1087.500000, 2175.000000, X, Y) && !ellipse(17730.713600, 30386.324120, 1982.642457, 1593.249646, 109.894000, X, Y) && !ellipse(17365.712372, 31524.434021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15313.552000, 32918.684000, 1825.400053, 1825.400053, 0.000000, X, Y) && !ellipse(15874.630661, 32399.462646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16746.864000, 32077.256000, 1710.264049, 1710.264049, 359.968000, X, Y)
[Sat Jun  9 02:55:55 2012] Writing fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src68.gif
[Sat Jun  9 04:31:10 2012] Mean detx,y = (-1233.13, -8980.20) 
[Sat Jun  9 04:31:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 04:31:28 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 04:31:29 2012] Setting source spectrum file to fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Jun  9 04:31:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sat Jun  9 08:00:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  9 08:00:32 2012] rmf not generated due to insufficient counts
[Sat Jun  9 14:20:47 2012] Updating aperture counts using extracted products
[Sat Jun  9 14:20:47 2012] Error reading totcts from fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Jun  9 14:20:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 14:20:54 2012] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src68.arf
[Sat Jun  9 14:20:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 14:20:54 2012] Updating source flux to 6.9e-14
[Sat Jun  9 14:39:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting