[Fri Jun  8 01:55:55 2012] Detection parameters:
  Position = (350.9, 437.0) = 10 43 39.40 -59 34 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.9 +/- 27.6
  Background counts = 138.2
  Rate = 0.02 +/- 0.002

[Fri Jun  8 01:55:57 2012] Off-axis axis estimate = 10.74'
[Fri Jun  8 02:01:55 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 02:01:55 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Fri Jun  8 02:01:55 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Fri Jun  8 02:01:55 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 11.80"
[Fri Jun  8 06:37:59 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src61.ximg exists
[Fri Jun  8 06:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src61.csv
[Fri Jun  8 06:37:59 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src61_1.ximg exists
[Fri Jun  8 06:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src61.csv
[Fri Jun  8 06:37:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 06:38:01 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Fri Jun  8 06:38:01 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Fri Jun  8 06:38:01 2012] Fit fullrun_pn_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Fri Jun  8 14:17:15 2012] Source 65 is offset by -3.435140 and 3.737742 pixels which is larger than
2 X fitted extent = 1.288382 x 1.288382, not incorporating fit results
[Fri Jun  8 14:17:15 2012] Spatial fit model total counts = 2564.190000, observed total counts = 2567.000000
[Fri Jun  8 14:17:15 2012] Offset between fit and detection position for source 65 = 1.125522 pixels
[Fri Jun  8 14:17:15 2012] 2464.835000 total counts/ 2166.660000 bgd. counts: snr = 6.405836
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 1.125522 pixels
  Position = (350.1, 437.9) = 10 43 39.82 -59 34 44.1
  Extent = 10.7 (8.5-15.7)", rotation angle = 0
  Source counts = 298.2 +/- 49.6
  Background counts = 2166.7
  Rate = 0.009 +/- 0.002
[Fri Jun  8 14:17:15 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 14:17:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 14:17:15 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 14:17:15 2012] Source does appear to be extended
[Fri Jun  8 14:17:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 14:18:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 14:18:44 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Fri Jun  8 14:18:44 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.033
[Fri Jun  8 14:18:44 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 10.67"
[Fri Jun  8 19:56:50 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src59.ximg exists
[Fri Jun  8 19:56:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src59.csv
[Fri Jun  8 19:56:50 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src59_1.ximg exists
[Fri Jun  8 19:56:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src59.csv
[Fri Jun  8 19:56:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 19:56:52 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Fri Jun  8 19:56:52 2012] fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Fri Jun  8 19:56:52 2012] Fit fullrun_pn_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sat Jun  9 02:54:58 2012] Warning, spatial fit 59 centroid is now closest to src. 120
[Sat Jun  9 02:54:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 02:54:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 02:54:58 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 02:54:58 2012] Source does appear to be extended
[Sat Jun  9 02:54:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 02:55:55 2012] XMMSAS src. selection expression = ellipse(30412.714800, 38047.949000, 640.044018, 640.044018, 0.000000, X, Y)
[Sat Jun  9 02:55:55 2012] Writing source region out to fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src65_src.reg
[Sat Jun  9 02:55:55 2012] Extracting stamp from image fullrun_pn_xmm0112560301_pi300-10000_cl_sm2.00.img.gz, (313, 401) - (387, 475)
[Sat Jun  9 02:55:55 2012] XMMSAS bgd. selection expression = annulus(30412.714800, 38047.949000, 1066.740031, 2133.480061, X, Y) && !ellipse(27813.109800, 40193.770200, 3515.184101, 3515.184101, 0.000000, X, Y) && !ellipse(29027.902008, 39658.312744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28213.534000, 40094.988000, 684.848020, 684.848020, 0.000000, X, Y) && !ellipse(29358.593872, 40238.524261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30249.961548, 38841.596527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29565.062225, 38224.774811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29886.411041, 36679.207916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27998.974609, 37404.461029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28555.673187, 36589.502441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30763.438904, 39794.494507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.478027, 38128.739746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30961.979340, 38986.842560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30850.983185, 35776.189972, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 02:55:55 2012] Writing fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src65.gif
[Sat Jun  9 04:29:04 2012] Mean detx,y = (10462.74, -4402.80) 
[Sat Jun  9 04:29:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 04:29:22 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 04:29:23 2012] Setting source spectrum file to fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sat Jun  9 04:29:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Sat Jun  9 14:20:47 2012] Updating aperture counts using extracted products
[Sat Jun  9 14:20:47 2012] Error reading totcts from fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sat Jun  9 14:20:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 14:20:54 2012] Using photon index=1.80, rate=0.0093, arf fullrun_pn_xmm0112560301_pi300-10000_pass1_cl_src65.arf
[Sat Jun  9 14:20:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 14:20:54 2012] Updating source flux to 5.7e-14
[Sat Jun  9 14:39:06 2012] Flag b found in src. 65 procflags, skipping spectral fitting