[Fri Jun  8 01:57:26 2012] Detection parameters:
  Position = (339.5, 485.6) = 10 43 45.93 -59 31 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.8 +/- 14.3
  Background counts = 42.7
  Rate = 0.002 +/- 0.0004

[Fri Jun  8 01:57:27 2012] Off-axis axis estimate = 13.89'
[Fri Jun  8 09:42:58 2012] Using EEF radius (= 13.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 09:42:58 2012] Initial guess for spatial extent in simple fitting = 13.38"
[Fri Jun  8 09:42:58 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.959
[Fri Jun  8 09:42:58 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 13.38"
[Fri Jun  8 14:16:36 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src69.ximg exists
[Fri Jun  8 14:16:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src69.csv
[Fri Jun  8 14:16:36 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src69_1.ximg exists
[Fri Jun  8 14:16:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src69.csv
[Fri Jun  8 14:16:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 14:16:38 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Fri Jun  8 14:16:38 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Fri Jun  8 14:16:38 2012] Fit fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Fri Jun  8 14:18:02 2012] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 16.752695 pixels away
[Fri Jun  8 14:18:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 14:18:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 14:18:02 2012] Assessing source extent using major
[Fri Jun  8 14:18:02 2012] Source does appear to be extended
[Fri Jun  8 14:18:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 14:18:03 2012] Source is confused with source 12
[Fri Jun  8 22:50:22 2012] Using EEF radius (= 13.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 22:50:22 2012] Initial guess for spatial extent in simple fitting = 13.38"
[Fri Jun  8 22:50:22 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.959
[Fri Jun  8 22:50:22 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 13.38"
[Sat Jun  9 02:54:29 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src64.ximg exists
[Sat Jun  9 02:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src64.csv
[Sat Jun  9 02:54:29 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src64_1.ximg exists
[Sat Jun  9 02:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src64.csv
[Sat Jun  9 02:54:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 02:54:30 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Sat Jun  9 02:54:30 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Sat Jun  9 02:54:30 2012] Fit fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Sat Jun  9 02:55:25 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 18.256304 pixels away
[Sat Jun  9 02:55:25 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 17.290362 pixels away
[Sat Jun  9 02:55:25 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 02:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 02:55:25 2012] Assessing source extent using major
[Sat Jun  9 02:55:25 2012] Source does appear to be extended
[Sat Jun  9 02:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 11:17:08 2012] XMMSAS src. selection expression = ellipse(29491.127625, 42201.132538, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  9 11:17:08 2012] Writing source region out to fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src53_src.reg
[Sat Jun  9 11:17:08 2012] Extracting stamp from image fullrun_mos2_xmm0112560301_pi300-10000_cl_sm2.00.img.gz, (302, 448) - (377, 523)
[Sat Jun  9 11:17:08 2012] XMMSAS bgd. selection expression = annulus(29491.127625, 42201.132538, 1087.500000, 2175.000000, X, Y) && !ellipse(27852.748000, 40255.004000, 428.156012, 428.156012, 0.000000, X, Y) && !ellipse(28046.836800, 40331.408000, 2064.184059, 2064.184059, 0.000000, X, Y) && !ellipse(27555.139780, 40290.532000, 1140.648033, 1140.648033, 0.000000, X, Y) && !ellipse(27606.747131, 41282.975616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29089.942000, 41262.840000, 2016.584058, 2016.584058, 0.000000, X, Y) && !ellipse(28166.477753, 41285.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29138.136169, 39540.142700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30865.787628, 39744.359589, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 11:17:08 2012] Writing fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src53.gif
[Sat Jun  9 12:19:32 2012] Mean detx,y = (-12368.44, 7998.56) 
[Sat Jun  9 12:19:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 12:20:01 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 12:20:01 2012] Setting source spectrum file to fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Jun  9 12:20:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat Jun  9 14:18:03 2012] Not generating rmf since there are only 74 counts
[Sat Jun  9 14:18:03 2012] rmf not generated due to insufficient counts
[Sat Jun  9 14:21:10 2012] Updating aperture counts using extracted products
[Sat Jun  9 14:21:10 2012] Error reading totcts from fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Jun  9 14:21:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 14:21:14 2012] Using photon index=1.80, rate=0.00202, arf fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src53.arf
[Sat Jun  9 14:21:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 14:21:14 2012] Updating source flux to 6.2e-14
[Sat Jun  9 14:31:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting