[Fri Jun 8 01:57:25 2012] Detection parameters: Position = (296.9, 320.9) = 10 44 10.34 -59 43 13.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 20018.8 +/- 167.8 Background counts = 108.0 Rate = 0.6 +/- 0.005 [Fri Jun 8 01:57:27 2012] Off-axis axis estimate = 1.63' [Fri Jun 8 09:42:58 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting [Fri Jun 8 09:42:58 2012] Initial guess for spatial extent in simple fitting = 7.24" [Fri Jun 8 09:42:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853 [Fri Jun 8 09:42:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24" [Fri Jun 8 14:16:33 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src1.ximg exists [Fri Jun 8 14:16:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src1.csv [Fri Jun 8 14:16:33 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src1_1.ximg exists [Fri Jun 8 14:16:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src1.csv [Fri Jun 8 14:16:33 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 8 14:16:36 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Fri Jun 8 14:16:36 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Fri Jun 8 14:16:36 2012] Fit fullrun_mos2_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Fri Jun 8 14:18:02 2012] Spatial fit model total counts = 18240.200000, observed total counts = 17939.000000 [Fri Jun 8 14:18:02 2012] Offset between fit and detection position for source 1 = 0.202837 pixels [Fri Jun 8 14:18:02 2012] 18125.610000 total counts/ 4871.910000 bgd. counts: snr = 189.883622 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.202837 pixels Position = (296.7, 320.8) = 10 44 10.44 -59 43 13.7 Extent = 5.6 (5.6-5.7)", rotation angle = 0 Source counts = 13253.7 +/- 134.6 Background counts = 4871.9 Rate = 0.4 +/- 0.004 [Fri Jun 8 14:18:02 2012] Vigneting correction estimate = 1.000000 [Fri Jun 8 14:18:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 8 14:18:02 2012] Assessing source extent using major axis lower bound [Fri Jun 8 14:18:02 2012] Source does appear to be extended [Fri Jun 8 14:18:02 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 8 22:50:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Jun 8 22:50:22 2012] Initial guess for spatial extent in simple fitting = 5.65" [Fri Jun 8 22:50:22 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.928 [Fri Jun 8 22:50:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.65" [Sat Jun 9 02:54:28 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src1.ximg exists [Sat Jun 9 02:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src1.csv [Sat Jun 9 02:54:28 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Jun 9 02:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src1.csv [Sat Jun 9 02:54:28 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 9 02:54:29 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Jun 9 02:54:29 2012] fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Jun 9 02:54:29 2012] Fit fullrun_mos2_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Jun 9 02:55:25 2012] Spatial fit model total counts = 18380.400000, observed total counts = 17978.000000 [Sat Jun 9 02:55:25 2012] Offset between fit and detection position for source 1 = 0.029969 pixels [Sat Jun 9 02:55:25 2012] 18491.690000 total counts/ 5374.890000 bgd. counts: snr = 178.913498 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.029969 pixels Position = (296.7, 320.8) = 10 44 10.46 -59 43 13.8 Extent = 5.6 (5.5-5.7)", rotation angle = 0 Source counts = 13116.8 +/- 136.0 Background counts = 5374.9 Rate = 0.4 +/- 0.004 [Sat Jun 9 02:55:25 2012] Vigneting correction estimate = 1.000000 [Sat Jun 9 02:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 9 02:55:25 2012] Assessing source extent using major axis lower bound [Sat Jun 9 02:55:25 2012] Source does appear to be extended [Sat Jun 9 02:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 9 11:17:05 2012] Counts = 13116.800000, rescaling region sizes by 3.000000 [Sat Jun 9 11:17:05 2012] XMMSAS src. selection expression = ellipse(25760.189000, 27858.245400, 1008.750629, 1008.750629, 0.000000, X, Y) [Sat Jun 9 11:17:05 2012] Writing source region out to fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src1_src.reg [Sat Jun 9 11:17:05 2012] Extracting stamp from image fullrun_mos2_xmm0112560301_pi300-10000_cl_sm2.00.img.gz, (239, 263) - (355, 379) [Sat Jun 9 11:17:06 2012] XMMSAS bgd. selection expression = annulus(25760.189000, 27858.245400, 5043.753145, 10087.506290, X, Y) && !ellipse(17743.759338, 30270.102600, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22254.394200, 26556.772800, 622.209618, 353.067210, 233.464000, X, Y) && !ellipse(17823.014000, 30764.348000, 894.520026, 894.520026, 0.000000, X, Y) && !ellipse(17365.057907, 31524.492432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25996.919600, 38219.740200, 619.492818, 619.492818, 0.000000, X, Y) && !ellipse(29388.760315, 20342.914871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33307.140800, 24134.764800, 364.380810, 364.380810, 0.000000, X, Y) && !ellipse(17075.177289, 24315.254765, 731.652821, 518.974282, 77.242760, X, Y) && !ellipse(20892.900208, 30031.327850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20969.307968, 23435.650970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29882.001038, 36667.539062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26912.878920, 31956.146700, 243.386407, 243.386407, 0.000000, X, Y) && !ellipse(20076.469406, 24459.990479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18047.115166, 24981.749400, 354.352010, 354.352010, 0.000000, X, Y) && !ellipse(18193.079239, 31466.118958, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(29393.247314, 38068.953796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16427.240494, 25610.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28532.079400, 36558.357400, 365.825611, 365.825611, 0.000000, X, Y) && !ellipse(23241.485400, 26120.464640, 300.011209, 300.011209, 0.000000, X, Y) && !ellipse(24935.085300, 31196.641200, 370.043211, 370.043211, 0.000000, X, Y) && !ellipse(16299.189758, 26407.666870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22755.875854, 34751.845154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30321.041992, 38297.886353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17802.107590, 28840.541901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28926.646000, 25779.727400, 262.079208, 262.079208, 0.000000, X, Y) && !ellipse(15506.194600, 35093.093860, 401.864812, 401.864812, 0.000000, X, Y) && !ellipse(24478.840000, 27318.260000, 960.176028, 960.176028, 0.000000, X, Y) && !ellipse(20178.012800, 27033.390200, 272.968808, 272.968808, 0.000000, X, Y) && !ellipse(28513.733000, 32422.826800, 500.670414, 500.670414, 0.000000, X, Y) && !ellipse(24797.797821, 29311.684814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21599.524307, 27510.135925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.664581, 20392.006363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18549.935089, 29598.581970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34760.203186, 26458.470856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29888.261100, 26739.999200, 410.261142, 410.261142, 0.000000, X, Y) && !ellipse(28333.601227, 38315.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26724.618958, 38353.785339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30922.031769, 32727.961456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17374.184570, 18351.985397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33572.486000, 22970.523000, 1614.104046, 1614.104046, 0.000000, X, Y) && !ellipse(16640.675644, 28791.668121, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 9 11:17:06 2012] Writing fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src1.gif [Sat Jun 9 11:27:17 2012] Mean detx,y = (15.22, -85.83) [Sat Jun 9 11:27:21 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jun 9 11:30:45 2012] Binned source spectrum to 10 counts/bin [Sat Jun 9 11:30:45 2012] Setting source spectrum file to fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Jun 9 11:30:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat Jun 9 14:21:06 2012] Updating aperture counts using extracted products [Sat Jun 9 14:21:07 2012] Error reading totcts from fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Jun 9 14:21:11 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jun 9 14:21:11 2012] Using photon index=1.80, rate=0.374, arf fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src1.arf [Sat Jun 9 14:21:11 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 9 14:21:11 2012] Updating source flux to 4.6e-12 [Sat Jun 9 14:39:06 2012] Reading fit data from xmm0112560301/analysis//spectral/fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src1_pl.csv [Sat Jun 9 14:39:06 2012] Spectral fit parameter nH value = 5.69274e+21 [Sat Jun 9 14:39:06 2012] Spectral fit parameter PhoIndex value = 3.21614 [Sat Jun 9 14:39:06 2012] Failed to get F(0.3-8.0) from xmm0112560301/analysis//spectral/fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sat Jun 9 14:39:06 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jun 9 14:39:06 2012] Using Nh = 5.7e+21, photon index=3.22, rate=0.374, arf fullrun_mos2_xmm0112560301_pi300-10000_pass1_cl_src1.arf [Sat Jun 9 14:39:06 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 9 14:39:06 2012] Updating source flux to 3.6e-12