[Fri Jun  8 01:56:41 2012] Detection parameters:
  Position = (227.5, 442.1) = 10 44 50.05 -59 34 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.5 +/- 15.8
  Background counts = 50.8
  Rate = 0.002 +/- 0.0004

[Fri Jun  8 01:56:42 2012] Off-axis axis estimate = 11.62'
[Fri Jun  8 06:38:02 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 06:38:02 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Fri Jun  8 06:38:02 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.956
[Fri Jun  8 06:38:02 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 12.24"
[Fri Jun  8 09:42:56 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src75.ximg exists
[Fri Jun  8 09:42:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src75.csv
[Fri Jun  8 09:42:56 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src75_1.ximg exists
[Fri Jun  8 09:42:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src75.csv
[Fri Jun  8 09:42:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 09:42:57 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Fri Jun  8 09:42:57 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Fri Jun  8 09:42:57 2012] Fit fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Fri Jun  8 14:17:39 2012] Warning, spatial fit 75 centroid is now closest to src. 3
[Fri Jun  8 14:17:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 14:17:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 14:17:39 2012] Assessing source extent using major
[Fri Jun  8 14:17:39 2012] Source does appear to be extended
[Fri Jun  8 14:17:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 19:56:53 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 19:56:53 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Fri Jun  8 19:56:53 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.956
[Fri Jun  8 19:56:53 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 12.24"
[Fri Jun  8 22:50:20 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src61.ximg exists
[Fri Jun  8 22:50:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src61.csv
[Fri Jun  8 22:50:20 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri Jun  8 22:50:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src61.csv
[Fri Jun  8 22:50:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 22:50:22 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri Jun  8 22:50:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src61.csv
[Fri Jun  8 22:50:22 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri Jun  8 22:50:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src61.csv
[Fri Jun  8 22:50:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 02:55:12 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 12.969758 pixels away
[Sat Jun  9 02:55:12 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 02:55:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 02:55:12 2012] Assessing source extent using major
[Sat Jun  9 02:55:12 2012] Source does appear to be extended
[Sat Jun  9 02:55:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 08:50:41 2012] XMMSAS src. selection expression = ellipse(19743.601746, 38417.981293, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  9 08:50:41 2012] Writing source region out to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src50_src.reg
[Sat Jun  9 08:50:41 2012] Extracting stamp from image fullrun_mos1_xmm0112560301_pi300-10000_cl_sm2.00.img.gz, (190, 405) - (265, 480)
[Sat Jun  9 08:50:41 2012] XMMSAS bgd. selection expression = annulus(19743.601746, 38417.981293, 1087.500000, 2175.000000, X, Y) && !ellipse(20466.958200, 38989.642400, 858.464025, 438.586413, 327.659300, X, Y) && !ellipse(21567.544800, 40172.683600, 591.412017, 591.412017, 0.000000, X, Y)
[Sat Jun  9 08:50:41 2012] Writing fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src50.gif
[Sat Jun  9 09:19:10 2012] Mean detx,y = (11951.83, 2753.68) 
[Sat Jun  9 09:19:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 09:19:20 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 09:19:20 2012] Setting source spectrum file to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Jun  9 09:19:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat Jun  9 11:11:42 2012] Not generating rmf since there are only 83 counts
[Sat Jun  9 11:11:42 2012] rmf not generated due to insufficient counts
[Sat Jun  9 14:21:02 2012] Updating aperture counts using extracted products
[Sat Jun  9 14:21:03 2012] Error reading totcts from fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Jun  9 14:21:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 14:21:06 2012] Using photon index=1.80, rate=0.00225, arf fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src50.arf
[Sat Jun  9 14:21:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 14:21:06 2012] Updating source flux to 5.1e-14
[Sat Jun  9 14:21:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting