[Fri Jun  8 01:56:41 2012] Detection parameters:
  Position = (328.9, 423.0) = 10 43 51.96 -59 35 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.2 +/- 20.5
  Background counts = 91.7
  Rate = 0.007 +/- 0.001

[Fri Jun  8 01:56:42 2012] Off-axis axis estimate = 9.30'
[Fri Jun  8 06:38:02 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 06:38:02 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Fri Jun  8 06:38:02 2012] source mask rpix=2.5, npix_max = 37, mask sum = 22, frac = 0.593
[Fri Jun  8 06:38:02 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.08"
[Fri Jun  8 09:42:55 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src25.ximg exists
[Fri Jun  8 09:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src25.csv
[Fri Jun  8 09:42:55 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Jun  8 09:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src25.csv
[Fri Jun  8 09:42:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 09:42:57 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Jun  8 09:42:57 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jun  8 09:42:57 2012] Fit fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Jun  8 14:17:39 2012] Spatial fit model total counts = 974.825000, observed total counts = 909.000000
[Fri Jun  8 14:17:39 2012] Offset between fit and detection position for source 22 = 1.134377 pixels
[Fri Jun  8 14:17:39 2012] 987.962000 total counts/ 866.933000 bgd. counts: snr = 4.110519
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.134377 pixels
  Position = (329.8, 422.3) = 10 43 51.48 -59 35 52.2
  Extent = 8.6 (6.0-12.2)", rotation angle = 0
  Source counts = 121.0 +/- 31.4
  Background counts = 866.9
  Rate = 0.003 +/- 0.0009
[Fri Jun  8 14:17:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 14:17:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 14:17:39 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 14:17:39 2012] Source does appear to be extended
[Fri Jun  8 14:17:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 14:17:39 2012] Source is confused with source 71
[Fri Jun  8 19:56:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 19:56:53 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Fri Jun  8 19:56:53 2012] source mask rpix=2.0, npix_max = 24, mask sum = 15, frac = 0.615
[Fri Jun  8 19:56:53 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.56"
[Fri Jun  8 22:50:20 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jun  8 22:50:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src25.csv
[Fri Jun  8 22:50:20 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jun  8 22:50:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src25.csv
[Fri Jun  8 22:50:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 22:50:21 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jun  8 22:50:21 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jun  8 22:50:21 2012] Fit fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Jun  9 02:55:11 2012] Warning, spatial fit 25 centroid is now closest to src. 21
[Sat Jun  9 02:55:12 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 02:55:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 02:55:12 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 02:55:12 2012] Source does appear to be extended
[Sat Jun  9 02:55:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 08:50:41 2012] XMMSAS src. selection expression = ellipse(28640.751800, 36688.112800, 513.854415, 513.854415, 0.000000, X, Y)
[Sat Jun  9 08:50:41 2012] Writing source region out to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src22_src.reg
[Sat Jun  9 08:50:41 2012] Extracting stamp from image fullrun_mos1_xmm0112560301_pi300-10000_cl_sm2.00.img.gz, (300, 393) - (359, 452)
[Sat Jun  9 08:50:41 2012] XMMSAS bgd. selection expression = annulus(28640.751800, 36688.112800, 856.424025, 1712.848049, X, Y) && !ellipse(27964.782000, 40089.012000, 2031.080058, 2031.080058, 0.000000, X, Y) && !ellipse(28525.394000, 39004.836000, 1589.184046, 1589.184046, 0.000000, X, Y) && !ellipse(29882.030243, 36726.663910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30269.666000, 38757.965200, 1696.480049, 1696.480049, 0.000000, X, Y) && !ellipse(29524.801361, 38286.297150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30391.823400, 38235.752600, 1907.728055, 521.180815, 88.444240, X, Y) && !ellipse(29249.226000, 38171.098000, 1916.920055, 1916.920055, 0.000000, X, Y) && !ellipse(30659.935242, 38837.377686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29313.194000, 35657.542000, 1745.848050, 1745.848050, 0.000000, X, Y) && !ellipse(30415.024719, 37965.930695, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 08:50:41 2012] Writing fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src22.gif
[Sat Jun  9 09:06:15 2012] Mean detx,y = (4669.47, 7973.55) 
[Sat Jun  9 09:06:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 09:06:29 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 09:06:29 2012] Setting source spectrum file to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jun  9 09:06:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Jun  9 14:21:00 2012] Updating aperture counts using extracted products
[Sat Jun  9 14:21:00 2012] Error reading totcts from fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jun  9 14:21:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 14:21:04 2012] Using photon index=1.80, rate=0.00345, arf fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src22.arf
[Sat Jun  9 14:21:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 14:21:04 2012] Updating source flux to 6.5e-14
[Sat Jun  9 14:21:19 2012] Flag c found in src. 22 procflags, skipping spectral fitting