[Fri Jun  8 01:56:41 2012] Detection parameters:
  Position = (249.0, 462.6) = 10 44 37.70 -59 32 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.7 +/- 20.0
  Background counts = 48.8
  Rate = 0.005 +/- 0.0005

[Fri Jun  8 01:56:42 2012] Off-axis axis estimate = 12.43'
[Fri Jun  8 06:38:02 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 06:38:02 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Fri Jun  8 06:38:02 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.905
[Fri Jun  8 06:38:02 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.64"
[Fri Jun  8 09:42:55 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jun  8 09:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src33.csv
[Fri Jun  8 09:42:55 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jun  8 09:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src33.csv
[Fri Jun  8 09:42:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 09:42:57 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jun  8 09:42:57 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jun  8 09:42:57 2012] Fit fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Jun  8 14:17:39 2012] Spatial fit model total counts = 728.655000, observed total counts = 726.000000
[Fri Jun  8 14:17:39 2012] Offset between fit and detection position for source 19 = 0.663982 pixels
[Fri Jun  8 14:17:39 2012] 709.979000 total counts/ 573.794000 bgd. counts: snr = 5.685272
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.663982 pixels
  Position = (248.5, 462.3) = 10 44 38.03 -59 32 57.8
  Extent = 7.4 (5.8-9.3)", rotation angle = 0
  Source counts = 136.2 +/- 26.6
  Background counts = 573.8
  Rate = 0.004 +/- 0.0008
[Fri Jun  8 14:17:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 14:17:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 14:17:39 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 14:17:39 2012] Source does appear to be extended
[Fri Jun  8 14:17:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 19:56:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 19:56:53 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Fri Jun  8 19:56:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.292
[Fri Jun  8 19:56:53 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.39"
[Fri Jun  8 22:50:20 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src31.ximg exists
[Fri Jun  8 22:50:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src31.csv
[Fri Jun  8 22:50:20 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Jun  8 22:50:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src31.csv
[Fri Jun  8 22:50:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 22:50:22 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Jun  8 22:50:22 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Jun  8 22:50:22 2012] Fit fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Jun  9 02:55:11 2012] Warning, spatial fit 31 centroid is now closest to src. 66
[Sat Jun  9 02:55:12 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 02:55:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 02:55:12 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 02:55:12 2012] Source does appear to be extended
[Sat Jun  9 02:55:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 08:50:41 2012] XMMSAS src. selection expression = ellipse(21567.544800, 40172.683600, 443.559013, 443.559013, 0.000000, X, Y)
[Sat Jun  9 08:50:41 2012] Writing source region out to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src19_src.reg
[Sat Jun  9 08:50:41 2012] Extracting stamp from image fullrun_mos1_xmm0112560301_pi300-10000_cl_sm2.00.img.gz, (223, 437) - (274, 488)
[Sat Jun  9 08:50:41 2012] XMMSAS bgd. selection expression = annulus(21567.544800, 40172.683600, 739.265021, 1478.530043, X, Y) && !ellipse(20466.958200, 38989.642400, 858.464025, 438.586413, 327.659300, X, Y) && !ellipse(23399.027496, 39333.167236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19743.601746, 38417.981293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22434.752716, 42236.959503, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 08:50:41 2012] Writing fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src19.gif
[Sat Jun  9 09:08:26 2012] Mean detx,y = (12022.16, 5072.02) 
[Sat Jun  9 09:08:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 09:08:42 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 09:08:42 2012] Setting source spectrum file to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun  9 09:08:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Jun  9 14:21:01 2012] Updating aperture counts using extracted products
[Sat Jun  9 14:21:01 2012] Error reading totcts from fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun  9 14:21:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 14:21:05 2012] Using photon index=1.80, rate=0.00388, arf fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src19.arf
[Sat Jun  9 14:21:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 14:21:05 2012] Updating source flux to 1e-13