[Fri Jun  8 01:56:40 2012] Detection parameters:
  Position = (338.3, 464.1) = 10 43 46.59 -59 32 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.4 +/- 23.6
  Background counts = 58.3
  Rate = 0.01 +/- 0.001

[Fri Jun  8 01:56:42 2012] Off-axis axis estimate = 12.36'
[Fri Jun  8 06:38:02 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 06:38:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 06:38:02 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Fri Jun  8 06:38:02 2012] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.039
[Fri Jun  8 06:38:02 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.61"
[Fri Jun  8 09:42:55 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun  8 09:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src13.csv
[Fri Jun  8 09:42:55 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun  8 09:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src13.csv
[Fri Jun  8 09:42:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 09:42:56 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun  8 09:42:56 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun  8 09:42:56 2012] Fit fullrun_mos1_xmm0112560301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun  8 14:17:39 2012] Warning, spatial fit 13 centroid is now closest to src. 18
[Fri Jun  8 14:17:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 14:17:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 14:17:39 2012] Assessing source extent using major
[Fri Jun  8 14:17:39 2012] Source does appear to be extended
[Fri Jun  8 14:17:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 19:56:53 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 19:56:53 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Fri Jun  8 19:56:53 2012] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.039
[Fri Jun  8 19:56:53 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.61"
[Fri Jun  8 22:50:19 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun  8 22:50:19 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun  8 22:50:19 2012] Fit fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_src13 appears to have run properly
[Fri Jun  8 22:50:21 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun  8 22:50:21 2012] fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun  8 22:50:21 2012] Fit fullrun_mos1_xmm0112560301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Jun  9 02:55:11 2012] Source 13 is offset by 0.758436 and 4.549757 pixels which is larger than
2 X fitted extent = 1.198920 x 1.198920, not incorporating fit results
[Sat Jun  9 02:55:11 2012] Warning, spatial fit 13 centroid is now closest to src. 68
[Sat Jun  9 02:55:12 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 02:55:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 02:55:12 2012] Assessing source extent using major
[Sat Jun  9 02:55:12 2012] Source does appear to be extended
[Sat Jun  9 02:55:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 02:55:12 2012] Source is confused with source 7
[Sat Jun  9 08:50:40 2012] XMMSAS src. selection expression = ellipse(29387.931946, 40331.776855, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  9 08:50:40 2012] Writing source region out to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun  9 08:50:40 2012] Extracting stamp from image fullrun_mos1_xmm0112560301_pi300-10000_cl_sm2.00.img.gz, (301, 427) - (376, 502)
[Sat Jun  9 08:50:40 2012] XMMSAS bgd. selection expression = annulus(29387.931946, 40331.776855, 1087.500000, 2175.000000, X, Y) && !ellipse(27964.782000, 40089.012000, 2031.080058, 2031.080058, 0.000000, X, Y) && !ellipse(28525.394000, 39004.836000, 1589.184046, 1589.184046, 0.000000, X, Y) && !ellipse(30269.666000, 38757.965200, 1696.480049, 1696.480049, 0.000000, X, Y) && !ellipse(29524.801361, 38286.297150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30391.823400, 38235.752600, 1907.728055, 521.180815, 88.444240, X, Y) && !ellipse(29249.226000, 38171.098000, 1916.920055, 1916.920055, 0.000000, X, Y) && !ellipse(30659.935242, 38837.377686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30415.024719, 37965.930695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26761.228000, 42008.384000, 2068.976060, 2068.976060, 0.000000, X, Y)
[Sat Jun  9 08:50:40 2012] Writing fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src13.gif
[Sat Jun  9 09:03:12 2012] Mean detx,y = (6890.21, 10844.15) 
[Sat Jun  9 09:03:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 09:03:23 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 09:03:24 2012] Setting source spectrum file to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun  9 09:03:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jun  9 09:59:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  9 09:59:42 2012] rmf not generated due to insufficient counts
[Sat Jun  9 14:21:00 2012] Updating aperture counts using extracted products
[Sat Jun  9 14:21:00 2012] Error reading totcts from fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun  9 14:21:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 14:21:04 2012] Using photon index=1.80, rate=0.0134, arf fullrun_mos1_xmm0112560301_pi300-10000_pass1_cl_src13.arf
[Sat Jun  9 14:21:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 14:21:04 2012] Updating source flux to 3e-13
[Sat Jun  9 14:21:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting