[Sat May 18 15:02:55 2013] Detection parameters:
  Position = (302.5, 376.3) = 10 44 7.33 -59 39 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.6 +/- 24.4
  Background counts = 268.3
  Rate = 0.004 +/- 0.0009

[Sat May 18 15:02:57 2013] Off-axis axis estimate = 5.65'
[Sat May 18 15:08:48 2013] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:08:48 2013] Initial guess for spatial extent in simple fitting = 9.25"
[Sat May 18 15:08:48 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.905
[Sat May 18 15:08:48 2013] Giving source the simple spatial ID 97 for pass 0, mean size = 9.25"
[Sat May 18 21:40:27 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src97.ximg exists
[Sat May 18 21:40:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src97.csv
[Sat May 18 21:40:27 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src97_1.ximg exists
[Sat May 18 21:40:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src97.csv
[Sat May 18 21:40:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 21:40:29 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Sat May 18 21:40:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src97.csv
[Sat May 18 21:40:29 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Sat May 18 21:40:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src97.csv
[Sat May 18 21:40:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src97_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:38:22 2013] Warning, spatial fit 97 centroid is now closest to src. 98
[Sun May 19 06:38:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:38:22 2013] Assessing source extent using major
[Sun May 19 06:38:22 2013] Source does appear to be extended
[Sun May 19 06:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:39:28 2013] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:39:28 2013] Initial guess for spatial extent in simple fitting = 9.25"
[Sun May 19 06:39:28 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.905
[Sun May 19 06:39:28 2013] Giving source the simple spatial ID 80 for pass 1, mean size = 9.25"
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src80.ximg exists
[Sun May 19 13:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src80.csv
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src80_1.ximg exists
[Sun May 19 13:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src80.csv
[Sun May 19 13:27:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 13:27:51 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Sun May 19 13:27:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sun May 19 13:27:51 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Sun May 19 13:27:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sun May 19 13:27:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:22 2013] Warning, spatial fit 80 centroid is now closest to src. 98
[Sun May 19 20:37:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:22 2013] Assessing source extent using major
[Sun May 19 20:37:22 2013] Source does appear to be extended
[Sun May 19 20:37:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:38:17 2013] XMMSAS src. selection expression = ellipse(26270.749664, 32686.298737, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:38:17 2013] Writing source region out to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src99_src.reg
[Sun May 19 20:38:17 2013] Extracting stamp from image fullrun_pn_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (265, 339) - (340, 414)
[Sun May 19 20:38:17 2013] XMMSAS bgd. selection expression = annulus(26270.749664, 32686.298737, 1087.500000, 2175.000000, X, Y) && !ellipse(26926.876000, 31988.172000, 324.473609, 324.473609, 0.000000, X, Y) && !ellipse(25817.299866, 31698.550842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23568.124400, 35525.284000, 1723.896050, 502.224814, 80.031000, X, Y) && !ellipse(29207.061600, 33324.472000, 1586.320046, 1051.688030, 242.858000, X, Y) && !ellipse(27241.688568, 32467.086243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28528.942352, 32413.247559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.405853, 31327.306061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28639.919922, 31173.216125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25218.102234, 30858.419922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24929.267400, 31138.649200, 827.464024, 827.464024, 0.000000, X, Y) && !ellipse(26194.310000, 31003.110000, 1340.424039, 1340.424039, 0.000000, X, Y) && !ellipse(25858.667877, 30592.898407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23783.502289, 30419.230286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29232.318024, 30234.450867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25128.832184, 29890.088257, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:38:17 2013] Writing fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src99.gif
[Sun May 19 22:20:14 2013] Mean detx,y = (3799.58, -3301.09) 
[Sun May 19 22:20:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 22:20:44 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 22:20:45 2013] Setting source spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sun May 19 22:20:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Mon May 20 00:46:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 00:46:41 2013] rmf not generated due to insufficient counts
[Mon May 20 07:47:37 2013] Updating aperture counts using extracted products
[Mon May 20 07:47:37 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src99_src_b10.pi.gz = 1919.00
[Mon May 20 07:47:37 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src99_bgd.pi.gz = 7073.00
[Mon May 20 07:47:37 2013] Got source and background scale factors 1188264.000000, 5359267.000000
[Mon May 20 07:47:37 2013] User source parameters:
  Position = (302.5, 376.3) = 10 44 7.33 -59 39 12.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 350.8 +/- 44.8
  Background aperture counts = 1568.2
  Rate = 0.01 +/- 0.002

[Mon May 20 07:47:37 2013] Updating counts from extracted products
[Mon May 20 07:47:37 2013] Set source signif. to 350.76/39.60 = 8.86
[Mon May 20 07:48:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:10 2013] Using photon index=1.80, rate=0.0126, arf fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src99.arf
[Mon May 20 07:48:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:10 2013] Updating source flux to 1.1e-13
[Mon May 20 07:50:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:53 2013] xmm0112560201/analysis//spectral/fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src99_pl.csv not found, spectral fit skipped or did not complete