[Sat May 18 15:02:54 2013] Detection parameters:
  Position = (270.5, 415.0) = 10 44 25.68 -59 36 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.3 +/- 22.1
  Background counts = 175.8
  Rate = 0.005 +/- 0.001

[Sat May 18 15:02:57 2013] Off-axis axis estimate = 8.69'
[Sat May 18 15:08:48 2013] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:08:48 2013] Initial guess for spatial extent in simple fitting = 10.77"
[Sat May 18 15:08:48 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.016
[Sat May 18 15:08:48 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 10.77"
[Sat May 18 21:40:27 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src81.ximg exists
[Sat May 18 21:40:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src81.csv
[Sat May 18 21:40:27 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src81_1.ximg exists
[Sat May 18 21:40:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src81.csv
[Sat May 18 21:40:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 21:40:29 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sat May 18 21:40:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sat May 18 21:40:29 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sat May 18 21:40:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sat May 18 21:40:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:38:21 2013] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 83 at 14.369713 pixels away
[Sun May 19 06:38:21 2013] Warning: source 83 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 83 at 12.115401 pixels away
[Sun May 19 06:38:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:38:22 2013] Assessing source extent using major
[Sun May 19 06:38:22 2013] Source does appear to be extended
[Sun May 19 06:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:38:22 2013] Source is confused with source 85
[Sun May 19 06:39:28 2013] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:39:28 2013] Initial guess for spatial extent in simple fitting = 10.77"
[Sun May 19 06:39:28 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.016
[Sun May 19 06:39:28 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 10.77"
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src68.ximg exists
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src68_1.ximg exists
[Sun May 19 13:27:48 2013] Fit fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src68 appears to have run properly
[Sun May 19 13:27:51 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Sun May 19 13:27:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src68.csv
[Sun May 19 13:27:51 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Sun May 19 13:27:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src68.csv
[Sun May 19 13:27:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:22 2013] Warning, spatial fit 68 centroid is now closest to src. 85
[Sun May 19 20:37:22 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 83 at 12.115401 pixels away
[Sun May 19 20:37:22 2013] Source 83 is offset by -0.998193 and 4.503821 pixels which is larger than
2 X fitted extent = 1.190170 x 1.190170, not incorporating fit results
[Sun May 19 20:37:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:22 2013] Assessing source extent using major
[Sun May 19 20:37:22 2013] Source does appear to be extended
[Sun May 19 20:37:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:38:17 2013] XMMSAS src. selection expression = ellipse(23487.015167, 36058.690399, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:38:17 2013] Writing source region out to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src83_src.reg
[Sun May 19 20:38:17 2013] Extracting stamp from image fullrun_pn_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (233, 378) - (308, 453)
[Sun May 19 20:38:17 2013] XMMSAS bgd. selection expression = annulus(23487.015167, 36058.690399, 1087.500000, 2175.000000, X, Y) && !ellipse(20504.853073, 39021.384491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25996.294000, 38286.450000, 508.036815, 508.036815, 0.000000, X, Y) && !ellipse(26283.622000, 38785.308000, 1683.944048, 567.696016, 82.589370, X, Y) && !ellipse(21793.978653, 37693.599030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.077240, 37531.238678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21992.335892, 37065.103149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26196.260162, 36304.328400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23568.124400, 35525.284000, 1723.896050, 502.224814, 80.031000, X, Y) && !ellipse(22756.637848, 34792.344971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22162.710449, 34687.168640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22380.656400, 34012.822400, 468.216813, 468.216813, 0.000000, X, Y)
[Sun May 19 20:38:17 2013] Writing fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src83.gif
[Sun May 19 22:07:48 2013] Mean detx,y = (3907.93, -7649.09) 
[Sun May 19 22:07:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 22:08:13 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 22:08:13 2013] Setting source spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sun May 19 22:08:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Mon May 20 00:34:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 00:34:17 2013] rmf not generated due to insufficient counts
[Mon May 20 07:47:29 2013] Updating aperture counts using extracted products
[Mon May 20 07:47:29 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src83_src_b10.pi.gz = 1404.00
[Mon May 20 07:47:29 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src83_bgd.pi.gz = 6206.00
[Mon May 20 07:47:30 2013] Got source and background scale factors 1320958.000000, 6439991.000000
[Mon May 20 07:47:30 2013] User source parameters:
  Position = (270.5, 415.0) = 10 44 25.68 -59 36 25.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 131.0 +/- 38.5
  Background aperture counts = 1273.0
  Rate = 0.005 +/- 0.001

[Mon May 20 07:47:30 2013] Updating counts from extracted products
[Mon May 20 07:47:30 2013] Set source signif. to 131.04/35.68 = 3.67
[Mon May 20 07:48:09 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:09 2013] Using photon index=1.80, rate=0.00472, arf fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src83.arf
[Mon May 20 07:48:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:10 2013] Updating source flux to 5.1e-14
[Mon May 20 07:50:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:53 2013] xmm0112560201/analysis//spectral/fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src83_pl.csv not found, spectral fit skipped or did not complete