[Sat May 18 15:02:54 2013] Detection parameters:
  Position = (305.5, 451.1) = 10 44 5.63 -59 33 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.8 +/- 23.3
  Background counts = 146.4
  Rate = 0.004 +/- 0.0006

[Sat May 18 15:02:57 2013] Off-axis axis estimate = 11.08'
[Sat May 18 15:08:48 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:08:48 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Sat May 18 15:08:48 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851
[Sat May 18 15:08:48 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 11.97"
[Sat May 18 21:40:26 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src62.ximg exists
[Sat May 18 21:40:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src62.csv
[Sat May 18 21:40:26 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src62_1.ximg exists
[Sat May 18 21:40:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src62.csv
[Sat May 18 21:40:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Sat May 18 21:40:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Sat May 18 21:40:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sat May 18 21:40:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:38:21 2013] Source 64 is offset by -5.140620 and -0.524257 pixels which is larger than
2 X fitted extent = 1.330064 x 1.330064, not incorporating fit results
[Sun May 19 06:38:21 2013] Source 64 is offset by 2.132069 and -6.724050 pixels which is larger than
2 X fitted extent = 1.536860 x 1.536860, not incorporating fit results
[Sun May 19 06:38:21 2013] Warning, spatial fit 62 centroid is now closest to src. 23
[Sun May 19 06:38:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:38:22 2013] Assessing source extent using major
[Sun May 19 06:38:22 2013] Source does appear to be extended
[Sun May 19 06:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:38:22 2013] Source is confused with source 4
[Sun May 19 06:39:28 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:39:28 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Sun May 19 06:39:28 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851
[Sun May 19 06:39:28 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 11.97"
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src54.ximg exists
[Sun May 19 13:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src54.csv
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src54_1.ximg exists
[Sun May 19 13:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src54.csv
[Sun May 19 13:27:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Sun May 19 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src54.csv
[Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Sun May 19 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src54.csv
[Sun May 19 13:27:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:22 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 12.568336 pixels away
[Sun May 19 20:37:22 2013] Source 64 is offset by -4.653931 and -5.571084 pixels which is larger than
2 X fitted extent = 2.414317 x 2.414317, not incorporating fit results
[Sun May 19 20:37:22 2013] Warning, spatial fit 54 centroid is now closest to src. 23
[Sun May 19 20:37:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:22 2013] Assessing source extent using major
[Sun May 19 20:37:22 2013] Source does appear to be extended
[Sun May 19 20:37:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:38:17 2013] XMMSAS src. selection expression = ellipse(26529.992035, 39198.615662, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:38:17 2013] Writing source region out to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src64_src.reg
[Sun May 19 20:38:17 2013] Extracting stamp from image fullrun_pn_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (268, 414) - (343, 489)
[Sun May 19 20:38:17 2013] XMMSAS bgd. selection expression = annulus(26529.992035, 39198.615662, 1087.500000, 2175.000000, X, Y) && !ellipse(25996.294000, 38286.450000, 508.036815, 508.036815, 0.000000, X, Y) && !ellipse(27756.378200, 40274.021400, 700.764020, 503.129614, 6.221770, X, Y) && !ellipse(26793.612549, 41789.119781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28057.877600, 41361.798000, 1617.648047, 426.990412, 20.332000, X, Y) && !ellipse(28763.931030, 41008.116364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25043.478302, 40812.876129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27444.510000, 40745.242000, 2044.640059, 565.178416, 9.010850, X, Y) && !ellipse(29224.916000, 40297.292000, 1179.352034, 1179.352034, 0.000000, X, Y) && !ellipse(29016.976000, 39689.094000, 417.472812, 242.483207, 15.282100, X, Y) && !ellipse(29177.866028, 39189.883270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26283.622000, 38785.308000, 1683.944048, 567.696016, 82.589370, X, Y) && !ellipse(29522.364044, 40989.085114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24866.161340, 39845.380800, 449.553613, 449.553613, 0.000000, X, Y) && !ellipse(25499.731812, 39209.618103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28528.198944, 38590.412170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27176.104034, 38097.391815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.077240, 37531.238678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.338074, 37229.377777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28836.904510, 36661.790924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26196.260162, 36304.328400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23568.124400, 35525.284000, 1723.896050, 502.224814, 80.031000, X, Y)
[Sun May 19 20:38:17 2013] Writing fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src64.gif
[Sun May 19 21:55:42 2013] Mean detx,y = (8097.85, -7920.69) 
[Sun May 19 21:55:49 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 21:56:28 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 21:56:29 2013] Setting source spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Sun May 19 21:56:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Mon May 20 00:30:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 00:30:40 2013] rmf not generated due to insufficient counts
[Mon May 20 07:47:24 2013] Updating aperture counts using extracted products
[Mon May 20 07:47:24 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src64_src_b10.pi.gz = 1675.00
[Mon May 20 07:47:24 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src64_bgd.pi.gz = 2335.00
[Mon May 20 07:47:24 2013] Got source and background scale factors 1131494.000000, 1796800.000000
[Mon May 20 07:47:24 2013] User source parameters:
  Position = (305.5, 451.1) = 10 44 5.63 -59 33 42.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 204.6 +/- 41.9
  Background aperture counts = 1470.4
  Rate = 0.007 +/- 0.002

[Mon May 20 07:47:24 2013] Updating counts from extracted products
[Mon May 20 07:47:24 2013] Set source signif. to 204.59/38.35 = 5.34
[Mon May 20 07:48:08 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:08 2013] Using photon index=1.80, rate=0.00738, arf fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src64.arf
[Mon May 20 07:48:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:08 2013] Updating source flux to 1e-13
[Mon May 20 07:50:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:53 2013] xmm0112560201/analysis//spectral/fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src64_pl.csv not found, spectral fit skipped or did not complete