[Sat May 18 15:02:54 2013] Detection parameters:
  Position = (286.6, 458.7) = 10 44 16.44 -59 33 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.5 +/- 21.9
  Background counts = 126.5
  Rate = 0.004 +/- 0.0006

[Sat May 18 15:02:57 2013] Off-axis axis estimate = 11.65'
[Sat May 18 15:08:48 2013] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:08:48 2013] Initial guess for spatial extent in simple fitting = 12.25"
[Sat May 18 15:08:48 2013] source mask rpix=2.8, npix_max = 44, mask sum = 48, frac = 1.091
[Sat May 18 15:08:48 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 12.25"
[Sat May 18 21:40:26 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src60.ximg exists
[Sat May 18 21:40:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src60.csv
[Sat May 18 21:40:26 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src60_1.ximg exists
[Sat May 18 21:40:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src60.csv
[Sat May 18 21:40:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sat May 18 21:40:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sat May 18 21:40:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sat May 18 21:40:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:38:21 2013] Warning, spatial fit 60 centroid is now closest to src. 65
[Sun May 19 06:38:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:38:22 2013] Assessing source extent using major
[Sun May 19 06:38:22 2013] Source does appear to be extended
[Sun May 19 06:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:39:28 2013] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:39:28 2013] Initial guess for spatial extent in simple fitting = 12.25"
[Sun May 19 06:39:28 2013] source mask rpix=2.8, npix_max = 44, mask sum = 48, frac = 1.091
[Sun May 19 06:39:28 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 12.25"
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src52.ximg exists
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src52_1.ximg exists
[Sun May 19 13:27:48 2013] Fit fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src52 appears to have run properly
[Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sun May 19 13:27:50 2013] Fit fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Sun May 19 20:37:22 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 11.904936 pixels away
[Sun May 19 20:37:22 2013] Spatial fit model total counts = 1504.060000, observed total counts = 1481.000000
[Sun May 19 20:37:22 2013] Offset between fit and detection position for source 62 = 0.283456 pixels
[Sun May 19 20:37:22 2013] 1446.517000 total counts/ 1327.350000 bgd. counts: snr = 3.270870
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.283456 pixels
  Position = (286.4, 458.6) = 10 44 16.58 -59 33 16.4
  Extent = 5.6 (4.3-7.1)", rotation angle = 0
  Source counts = 119.2 +/- 38.0
  Background counts = 1327.3
  Rate = 0.004 +/- 0.001
[Sun May 19 20:37:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:22 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:37:22 2013] Source does appear to be extended
[Sun May 19 20:37:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:38:17 2013] XMMSAS src. selection expression = ellipse(24866.161340, 39845.380800, 337.165210, 337.165210, 0.000000, X, Y)
[Sun May 19 20:38:17 2013] Writing source region out to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src62_src.reg
[Sun May 19 20:38:17 2013] Extracting stamp from image fullrun_pn_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (267, 439) - (306, 478)
[Sun May 19 20:38:17 2013] XMMSAS bgd. selection expression = annulus(24866.161340, 39845.380800, 561.942016, 1123.884032, X, Y) && !ellipse(25996.294000, 38286.450000, 508.036815, 508.036815, 0.000000, X, Y) && !ellipse(26793.612549, 41789.119781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25043.478302, 40812.876129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27444.510000, 40745.242000, 2044.640059, 565.178416, 9.010850, X, Y) && !ellipse(26283.622000, 38785.308000, 1683.944048, 567.696016, 82.589370, X, Y) && !ellipse(26529.992035, 39198.615662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25499.731812, 39209.618103, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:38:17 2013] Writing fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src62.gif
[Sun May 19 21:53:04 2013] Mean detx,y = (7478.77, -9558.24) 
[Sun May 19 21:53:09 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 21:53:36 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 21:53:37 2013] Setting source spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sun May 19 21:53:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Mon May 20 07:47:23 2013] Updating aperture counts using extracted products
[Mon May 20 07:47:23 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 334.00
[Mon May 20 07:47:23 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src62_bgd.pi.gz = 517.00
[Mon May 20 07:47:23 2013] Got source and background scale factors 327932.000000, 995413.000000
[Mon May 20 07:47:23 2013] User source parameters:
  Position = (286.4, 458.6) = 10 44 16.58 -59 33 16.4
  Extent = 5.6 (4.3-7.1)", rotation angle = 0
  Source aperture counts = 163.7 +/- 19.3
  Background aperture counts = 170.3
  Rate = 0.006 +/- 0.0007

[Mon May 20 07:48:08 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:08 2013] Using photon index=1.80, rate=0.0043, arf fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src62.arf
[Mon May 20 07:48:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:08 2013] Updating source flux to 7.8e-14
[Mon May 20 07:50:53 2013] xmm0112560201/analysis//spectral/fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete