[Sat May 18 15:02:53 2013] Detection parameters:
  Position = (188.0, 324.3) = 10 45 13.17 -59 42 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 483.4 +/- 34.2
  Background counts = 206.2
  Rate = 0.01 +/- 0.0009

[Sat May 18 15:02:57 2013] Off-axis axis estimate = 8.22'
[Sat May 18 15:08:48 2013] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:08:48 2013] Initial guess for spatial extent in simple fitting = 10.54"
[Sat May 18 15:08:48 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Sat May 18 15:08:48 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 10.54"
[Sat May 18 21:40:26 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src38.ximg exists
[Sat May 18 21:40:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src38.csv
[Sat May 18 21:40:26 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src38_1.ximg exists
[Sat May 18 21:40:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src38.csv
[Sat May 18 21:40:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sat May 18 21:40:28 2013] Fit fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun May 19 06:38:21 2013] Spatial fit model total counts = 2561.900000, observed total counts = 2323.000000
[Sun May 19 06:38:21 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 06:38:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:38:22 2013] Assessing source extent using major
[Sun May 19 06:38:22 2013] Source does appear to be extended
[Sun May 19 06:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:39:28 2013] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:39:28 2013] Initial guess for spatial extent in simple fitting = 10.54"
[Sun May 19 06:39:28 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Sun May 19 06:39:28 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 10.54"
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src37.ximg exists
[Sun May 19 13:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src37.csv
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun May 19 13:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src37.csv
[Sun May 19 13:27:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun May 19 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun May 19 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sun May 19 13:27:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:22 2013] Source 40 is offset by 7.072034 and 6.996133 pixels which is larger than
2 X fitted extent = 1.211393 x 1.211393, not incorporating fit results
[Sun May 19 20:37:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:22 2013] Assessing source extent using major
[Sun May 19 20:37:22 2013] Source does appear to be extended
[Sun May 19 20:37:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:38:16 2013] XMMSAS src. selection expression = ellipse(16310.632935, 28167.587555, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:38:16 2013] Writing source region out to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src40_src.reg
[Sun May 19 20:38:16 2013] Extracting stamp from image fullrun_pn_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (151, 287) - (226, 362)
[Sun May 19 20:38:16 2013] XMMSAS bgd. selection expression = annulus(16310.632935, 28167.587555, 1087.500000, 2175.000000, X, Y) && !ellipse(17734.174000, 30423.411800, 1883.090454, 1513.732844, 108.173700, X, Y) && !ellipse(16424.091629, 25773.162659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18114.214249, 25395.511292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14392.817657, 27107.288330, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:38:16 2013] Writing fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src40.gif
[Sun May 19 21:36:32 2013] Mean detx,y = (-6705.52, -6592.58) 
[Sun May 19 21:36:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 21:36:55 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 21:36:56 2013] Setting source spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun May 19 21:36:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon May 20 00:14:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 00:14:48 2013] rmf not generated due to insufficient counts
[Mon May 20 07:47:16 2013] Updating aperture counts using extracted products
[Mon May 20 07:47:16 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 1796.00
[Mon May 20 07:47:16 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src40_bgd.pi.gz = 5883.00
[Mon May 20 07:47:16 2013] Got source and background scale factors 1230128.000000, 5509665.000000
[Mon May 20 07:47:16 2013] User source parameters:
  Position = (188.0, 324.3) = 10 45 13.17 -59 42 57.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 482.5 +/- 43.4
  Background aperture counts = 1313.5
  Rate = 0.02 +/- 0.002

[Mon May 20 07:47:16 2013] Updating counts from extracted products
[Mon May 20 07:47:16 2013] Set source signif. to 482.52/36.24 = 13.31
[Mon May 20 07:48:08 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:08 2013] Using photon index=1.80, rate=0.0174, arf fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src40.arf
[Mon May 20 07:48:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:08 2013] Updating source flux to 2.2e-13
[Mon May 20 07:50:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:53 2013] xmm0112560201/analysis//spectral/fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete