[Sat May 18 15:02:53 2013] Detection parameters:
  Position = (297.3, 364.9) = 10 44 10.33 -59 39 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 416.8 +/- 30.7
  Background counts = 268.7
  Rate = 0.02 +/- 0.001

[Sat May 18 15:02:57 2013] Off-axis axis estimate = 4.82'
[Sat May 18 15:08:48 2013] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:08:48 2013] Initial guess for spatial extent in simple fitting = 8.84"
[Sat May 18 15:08:48 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.936
[Sat May 18 15:08:48 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 8.84"
[Sat May 18 21:40:26 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src35.ximg exists
[Sat May 18 21:40:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src35.csv
[Sat May 18 21:40:26 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat May 18 21:40:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src35.csv
[Sat May 18 21:40:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat May 18 21:40:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat May 18 21:40:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat May 18 21:40:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:38:21 2013] Spatial fit model total counts = 3696.080000, observed total counts = 3032.000000
[Sun May 19 06:38:21 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 06:38:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:38:22 2013] Assessing source extent using major
[Sun May 19 06:38:22 2013] Source does appear to be extended
[Sun May 19 06:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:39:28 2013] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:39:28 2013] Initial guess for spatial extent in simple fitting = 8.84"
[Sun May 19 06:39:28 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.936
[Sun May 19 06:39:28 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 8.84"
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src34.ximg exists
[Sun May 19 13:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src34.csv
[Sun May 19 13:27:48 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src34_1.ximg exists
[Sun May 19 13:27:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src34.csv
[Sun May 19 13:27:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sun May 19 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sun May 19 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sun May 19 13:27:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:22 2013] Spatial fit model total counts = 3687.960000, observed total counts = 3032.000000
[Sun May 19 20:37:22 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:37:22 2013] Source 37 is offset by 0.820067 and 3.070171 pixels which is larger than
2 X fitted extent = 1.026041 x 1.026041, not incorporating fit results
[Sun May 19 20:37:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:22 2013] Assessing source extent using major
[Sun May 19 20:37:22 2013] Source does appear to be extended
[Sun May 19 20:37:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:37:22 2013] Source is confused with source 115
[Sun May 19 20:38:16 2013] XMMSAS src. selection expression = ellipse(25817.299866, 31698.550842, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:38:16 2013] Writing source region out to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src37_src.reg
[Sun May 19 20:38:16 2013] Extracting stamp from image fullrun_pn_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (260, 327) - (335, 402)
[Sun May 19 20:38:16 2013] XMMSAS bgd. selection expression = annulus(25817.299866, 31698.550842, 1087.500000, 2175.000000, X, Y) && !ellipse(26926.876000, 31988.172000, 324.473609, 324.473609, 0.000000, X, Y) && !ellipse(23568.124400, 35525.284000, 1723.896050, 502.224814, 80.031000, X, Y) && !ellipse(29207.061600, 33324.472000, 1586.320046, 1051.688030, 242.858000, X, Y) && !ellipse(27241.688568, 32467.086243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26270.749664, 32686.298737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28528.942352, 32413.247559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.405853, 31327.306061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28639.919922, 31173.216125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25218.102234, 30858.419922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24929.267400, 31138.649200, 827.464024, 827.464024, 0.000000, X, Y) && !ellipse(26194.310000, 31003.110000, 1340.424039, 1340.424039, 0.000000, X, Y) && !ellipse(25858.667877, 30592.898407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23783.502289, 30419.230286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25128.832184, 29890.088257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.415985, 29339.995392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.939972, 28756.369507, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:38:16 2013] Writing fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src37.gif
[Sun May 19 21:34:33 2013] Mean detx,y = (2607.56, -2866.99) 
[Sun May 19 21:34:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 21:34:58 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 21:34:58 2013] Setting source spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun May 19 21:34:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Mon May 20 00:11:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 00:11:41 2013] rmf not generated due to insufficient counts
[Mon May 20 07:47:15 2013] Updating aperture counts using extracted products
[Mon May 20 07:47:15 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 2068.00
[Mon May 20 07:47:15 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src37_bgd.pi.gz = 4026.00
[Mon May 20 07:47:15 2013] Got source and background scale factors 1090374.000000, 2962940.000000
[Mon May 20 07:47:15 2013] User source parameters:
  Position = (297.3, 364.9) = 10 44 10.33 -59 39 59.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 586.4 +/- 46.5
  Background aperture counts = 1481.6
  Rate = 0.02 +/- 0.002

[Mon May 20 07:47:15 2013] Updating counts from extracted products
[Mon May 20 07:47:15 2013] Set source signif. to 586.42/38.49 = 15.23
[Mon May 20 07:48:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:07 2013] Using photon index=1.80, rate=0.0211, arf fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src37.arf
[Mon May 20 07:48:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:07 2013] Updating source flux to 1.7e-13
[Mon May 20 07:50:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:53 2013] xmm0112560201/analysis//spectral/fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete