[Sat May 18 15:02:53 2013] Detection parameters: Position = (135.5, 426.6) = 10 45 43.05 -59 35 35.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 209.7 +/- 23.4 Background counts = 86.7 Rate = 0.006 +/- 0.0006 [Sat May 18 15:02:57 2013] Off-axis axis estimate = 15.03' [Sat May 18 15:08:48 2013] Using EEF radius (= 13.94 ")to estimate initial spatial extent for simple fitting [Sat May 18 15:08:48 2013] Initial guess for spatial extent in simple fitting = 13.94" [Sat May 18 15:08:48 2013] source mask rpix=3.2, npix_max = 54, mask sum = 46, frac = 0.837 [Sat May 18 15:08:48 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 13.94" [Sat May 18 21:40:25 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src26.ximg exists [Sat May 18 21:40:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src26.csv [Sat May 18 21:40:25 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src26_1.ximg exists [Sat May 18 21:40:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src26.csv [Sat May 18 21:40:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists [Sat May 18 21:40:28 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists [Sat May 18 21:40:28 2013] Fit fullrun_pn_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly [Sun May 19 06:38:21 2013] Spatial fit model total counts = 1396.420000, observed total counts = 1311.000000 [Sun May 19 06:38:21 2013] Offset between fit and detection position for source 27 = 0.464624 pixels [Sun May 19 06:38:21 2013] 1391.322000 total counts/ 1166.230000 bgd. counts: snr = 6.591253 Spatial fit parameters: Offset between fit and detection position for source 27 = 0.464624 pixels Position = (135.1, 426.8) = 10 45 43.29 -59 35 32.4 Extent = 9.4 (7.4-13.4)", rotation angle = 0 Source counts = 225.1 +/- 37.3 Background counts = 1166.2 Rate = 0.008 +/- 0.001 [Sun May 19 06:38:22 2013] Vigneting correction estimate = 1.000000 [Sun May 19 06:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 06:38:22 2013] Assessing source extent using major axis lower bound [Sun May 19 06:38:22 2013] Source does appear to be extended [Sun May 19 06:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 06:38:22 2013] Source is confused with source 30 [Sun May 19 06:39:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 19 06:39:28 2013] Initial guess for spatial extent in simple fitting = 9.38" [Sun May 19 06:39:28 2013] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.028 [Sun May 19 06:39:28 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.38" [Sun May 19 13:27:47 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src25.ximg exists [Sun May 19 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src25.csv [Sun May 19 13:27:47 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src25_1.ximg exists [Sun May 19 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src25.csv [Sun May 19 13:27:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src25_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Sun May 19 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src25.csv [Sun May 19 13:27:50 2013] fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Sun May 19 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src25.csv [Sun May 19 13:27:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:37:22 2013] Warning, spatial fit 25 centroid is now closest to src. 30 [Sun May 19 20:37:22 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:37:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:37:22 2013] Assessing source extent using major axis lower bound [Sun May 19 20:37:22 2013] Source does appear to be extended [Sun May 19 20:37:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:38:16 2013] XMMSAS src. selection expression = ellipse(11700.981560, 37084.191500, 562.614616, 562.614616, 0.000000, X, Y) [Sun May 19 20:38:16 2013] Writing source region out to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src27_src.reg [Sun May 19 20:38:16 2013] Extracting stamp from image fullrun_pn_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (103, 394) - (167, 459) [Sun May 19 20:38:16 2013] XMMSAS bgd. selection expression = annulus(11700.981560, 37084.191500, 937.691027, 1875.382054, X, Y) && !ellipse(12135.444600, 36618.968860, 2185.648063, 357.440010, 46.479400, X, Y) && !ellipse(12337.075800, 36392.035800, 2595.304075, 432.026412, 47.776600, X, Y) && !ellipse(13455.971985, 35192.402130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14233.967200, 34283.739000, 2458.416071, 400.040012, 47.252200, X, Y) && !ellipse(14315.539740, 34192.653800, 2312.328067, 381.190411, 47.173700, X, Y) && !ellipse(15077.664000, 33359.954000, 2305.384066, 393.894411, 48.242700, X, Y) [Sun May 19 20:38:16 2013] Writing fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src27.gif [Sun May 19 21:20:23 2013] Mean detx,y = (-4144.00, -16213.46) [Sun May 19 21:20:26 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 19 21:20:42 2013] Binned source spectrum to 10 counts/bin [Sun May 19 21:20:43 2013] Setting source spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src27_src_b10.pi.gz [Sun May 19 21:20:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src27_bgd.pi.gz [Mon May 20 07:47:11 2013] Updating aperture counts using extracted products [Mon May 20 07:47:11 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 575.00 [Mon May 20 07:47:11 2013] Total counts from fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src27_bgd.pi.gz = 749.00 [Mon May 20 07:47:11 2013] Got source and background scale factors 732374.000000, 0.000000 [Mon May 20 07:47:11 2013] Background scale factor is not positive, halting re-assessment of this source [Mon May 20 07:48:07 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 20 07:48:07 2013] Using photon index=1.80, rate=0.00812, arf fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src27.arf [Mon May 20 07:48:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 20 07:48:07 2013] Updating source flux to 2.1e-13 [Mon May 20 07:50:09 2013] Flag c found in src. 27 procflags, skipping spectral fitting [Mon May 20 07:50:53 2013] xmm0112560201/analysis//spectral/fullrun_pn_xmm0112560201_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete