[Sat May 18 15:04:07 2013] Detection parameters:
  Position = (316.1, 316.5) = 10 43 59.51 -59 43 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.0 +/- 17.9
  Background counts = 92.0
  Rate = 0.003 +/- 0.0005

[Sat May 18 15:04:08 2013] Off-axis axis estimate = 1.84'
[Sun May 19 02:47:41 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:47:41 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Sun May 19 02:47:41 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Sun May 19 02:47:41 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 7.35"
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src62.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src62.csv
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src62_1.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src62.csv
[Sun May 19 06:37:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:37:43 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Sun May 19 06:37:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sun May 19 06:37:43 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Sun May 19 06:37:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sun May 19 06:37:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:39:00 2013] Source 64 is offset by 6.872764 and -3.751482 pixels which is larger than
2 X fitted extent = 0.844382 x 0.844382, not incorporating fit results
[Sun May 19 06:39:01 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:39:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:39:01 2013] Assessing source extent using major
[Sun May 19 06:39:01 2013] Source does appear to be extended
[Sun May 19 06:39:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 17:44:41 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:44:41 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Sun May 19 17:44:41 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Sun May 19 17:44:41 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 7.35"
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src58.ximg exists
[Sun May 19 20:36:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src58.csv
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src58_1.ximg exists
[Sun May 19 20:36:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src58.csv
[Sun May 19 20:36:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sun May 19 20:36:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sun May 19 20:36:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sun May 19 20:36:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:50 2013] Source 64 is offset by 6.872764 and -3.758723 pixels which is larger than
2 X fitted extent = 0.844382 x 0.844382, not incorporating fit results
[Sun May 19 20:37:50 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:50 2013] Assessing source extent using major
[Sun May 19 20:37:50 2013] Source does appear to be extended
[Sun May 19 20:37:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 04:51:12 2013] XMMSAS src. selection expression = ellipse(27453.740448, 27491.317078, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 04:51:12 2013] Writing source region out to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src64_src.reg
[Mon May 20 04:51:12 2013] Extracting stamp from image fullrun_mos2_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (279, 279) - (354, 354)
[Mon May 20 04:51:12 2013] XMMSAS bgd. selection expression = annulus(27453.740448, 27491.317078, 1087.500000, 2175.000000, X, Y) && !ellipse(25772.096880, 27897.222400, 1399.281640, 1251.744036, 330.489300, X, Y) && !ellipse(27135.091400, 25629.058600, 613.098418, 365.210411, 90.922930, X, Y) && !ellipse(25296.396393, 28770.611084, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 04:51:12 2013] Writing fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src64.gif
[Mon May 20 05:54:11 2013] Mean detx,y = (-1042.32, -1444.94) 
[Mon May 20 05:54:14 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 05:54:24 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 05:54:24 2013] Setting source spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Mon May 20 05:54:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Mon May 20 07:35:52 2013] Not generating rmf since there are only 87 counts
[Mon May 20 07:35:52 2013] rmf not generated due to insufficient counts
[Mon May 20 07:48:54 2013] Updating aperture counts using extracted products
[Mon May 20 07:48:54 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src64_src_b10.pi.gz = 718.00
[Mon May 20 07:48:54 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src64_bgd.pi.gz = 3481.00
[Mon May 20 07:48:54 2013] Got source and background scale factors 1190276.000000, 7732772.000000
[Mon May 20 07:48:54 2013] User source parameters:
  Position = (316.1, 316.5) = 10 43 59.51 -59 43 33.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 182.2 +/- 27.8
  Background aperture counts = 535.8
  Rate = 0.005 +/- 0.0008

[Mon May 20 07:48:54 2013] Updating counts from extracted products
[Mon May 20 07:48:54 2013] Set source signif. to 182.18/23.15 = 7.87
[Mon May 20 07:49:00 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:49:00 2013] Using photon index=1.80, rate=0.00519, arf fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src64.arf
[Mon May 20 07:49:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:49:00 2013] Updating source flux to 9.3e-14
[Mon May 20 07:49:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:09 2013] xmm0112560201/analysis//spectral/fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src64_pl.csv not found, spectral fit skipped or did not complete