[Sat May 18 15:04:07 2013] Detection parameters:
  Position = (291.3, 331.3) = 10 44 13.77 -59 42 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.7 +/- 17.2
  Background counts = 109.2
  Rate = 0.002 +/- 0.0005

[Sat May 18 15:04:08 2013] Off-axis axis estimate = 2.43'
[Sun May 19 02:47:41 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:47:41 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Sun May 19 02:47:41 2013] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.177
[Sun May 19 02:47:41 2013] Giving source the simple spatial ID 66 for pass 0, mean size = 7.65"
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src66.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src66.csv
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src66_1.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src66.csv
[Sun May 19 06:37:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:37:44 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Sun May 19 06:37:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src66.csv
[Sun May 19 06:37:44 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Sun May 19 06:37:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src66.csv
[Sun May 19 06:37:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:39:00 2013] Source 62 is offset by 7.351315 and -6.130999 pixels which is larger than
2 X fitted extent = 7.030667 x 7.030667, not incorporating fit results
[Sun May 19 06:39:01 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:39:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:39:01 2013] Assessing source extent using major
[Sun May 19 06:39:01 2013] Source does appear to be extended
[Sun May 19 06:39:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 17:44:41 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:44:41 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Sun May 19 17:44:41 2013] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.177
[Sun May 19 17:44:41 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 7.65"
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src62.ximg exists
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src62_1.ximg exists
[Sun May 19 20:36:56 2013] Fit fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src62 appears to have run properly
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sun May 19 20:36:57 2013] Fit fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Sun May 19 20:37:50 2013] Source 62 is offset by -6.606754 and 6.284817 pixels which is larger than
2 X fitted extent = 7.030667 x 2.724501, not incorporating fit results
[Sun May 19 20:37:50 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:50 2013] Assessing source extent using major
[Sun May 19 20:37:50 2013] Source does appear to be extended
[Sun May 19 20:37:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 04:51:13 2013] XMMSAS src. selection expression = ellipse(25296.396393, 28770.611084, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 04:51:13 2013] Writing source region out to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src62_src.reg
[Mon May 20 04:51:13 2013] Extracting stamp from image fullrun_mos2_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (254, 294) - (329, 369)
[Mon May 20 04:51:13 2013] XMMSAS bgd. selection expression = annulus(25296.396393, 28770.611084, 1087.500000, 2175.000000, X, Y) && !ellipse(25772.096880, 27897.222400, 1399.281640, 1251.744036, 330.489300, X, Y) && !ellipse(22954.020600, 29641.729200, 427.560012, 277.877608, 0.110867, X, Y) && !ellipse(23743.631714, 30525.853607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23233.579346, 26137.695526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.740448, 27491.317078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23889.506989, 26300.164734, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 04:51:13 2013] Writing fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src62.gif
[Mon May 20 05:57:01 2013] Mean detx,y = (-134.71, 740.84) 
[Mon May 20 05:57:04 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 05:57:18 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 05:57:18 2013] Setting source spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Mon May 20 05:57:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Mon May 20 07:40:30 2013] Not generating rmf since there are only 71 counts
[Mon May 20 07:40:30 2013] rmf not generated due to insufficient counts
[Mon May 20 07:48:55 2013] Updating aperture counts using extracted products
[Mon May 20 07:48:55 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 1353.00
[Mon May 20 07:48:55 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src62_bgd.pi.gz = 4228.00
[Mon May 20 07:48:55 2013] Got source and background scale factors 1162688.000000, 6867440.000000
[Mon May 20 07:48:55 2013] User source parameters:
  Position = (291.3, 331.3) = 10 44 13.77 -59 42 25.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 637.2 +/- 37.8
  Background aperture counts = 715.8
  Rate = 0.02 +/- 0.001

[Mon May 20 07:48:55 2013] Updating counts from extracted products
[Mon May 20 07:48:55 2013] Set source signif. to 637.18/26.75 = 23.82
[Mon May 20 07:49:00 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:49:00 2013] Using photon index=1.80, rate=0.0182, arf fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src62.arf
[Mon May 20 07:49:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:49:00 2013] Updating source flux to 3.4e-13
[Mon May 20 07:49:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:09 2013] xmm0112560201/analysis//spectral/fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete