[Sat May 18 15:04:07 2013] Detection parameters:
  Position = (303.0, 417.6) = 10 44 7.05 -59 36 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.6 +/- 16.4
  Background counts = 92.1
  Rate = 0.004 +/- 0.0007

[Sat May 18 15:04:08 2013] Off-axis axis estimate = 8.65'
[Sun May 19 02:47:41 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:47:41 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Sun May 19 02:47:41 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Sun May 19 02:47:41 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 10.75"
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src46.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src46.csv
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src46.csv
[Sun May 19 06:37:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:37:43 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun May 19 06:37:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sun May 19 06:37:43 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun May 19 06:37:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sun May 19 06:37:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:39:00 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 10.239270 pixels away
[Sun May 19 06:39:00 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 14.555010 pixels away
[Sun May 19 06:39:01 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:39:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:39:01 2013] Assessing source extent using major
[Sun May 19 06:39:01 2013] Source does appear to be extended
[Sun May 19 06:39:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 17:44:41 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:44:41 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Sun May 19 17:44:41 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Sun May 19 17:44:41 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 10.75"
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src43.ximg exists
[Sun May 19 20:36:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src43.csv
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun May 19 20:36:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src43.csv
[Sun May 19 20:36:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun May 19 20:36:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun May 19 20:36:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May 19 20:36:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:50 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 13.248497 pixels away
[Sun May 19 20:37:50 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:50 2013] Assessing source extent using major
[Sun May 19 20:37:50 2013] Source does appear to be extended
[Sun May 19 20:37:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 04:51:11 2013] XMMSAS src. selection expression = ellipse(26314.111603, 36285.358215, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 04:51:11 2013] Writing source region out to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src56_src.reg
[Mon May 20 04:51:11 2013] Extracting stamp from image fullrun_mos2_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (266, 380) - (341, 455)
[Mon May 20 04:51:11 2013] XMMSAS bgd. selection expression = annulus(26314.111603, 36285.358215, 1087.500000, 2175.000000, X, Y) && !ellipse(26076.378400, 38263.778800, 841.232024, 444.580013, 347.263800, X, Y) && !ellipse(26213.040000, 38389.774000, 931.784027, 931.784027, 0.000000, X, Y) && !ellipse(26634.990479, 39228.179413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28440.192000, 36547.130000, 1681.928048, 492.002414, 332.503500, X, Y) && !ellipse(28538.505680, 38602.943600, 1890.616054, 447.326413, 137.876000, X, Y) && !ellipse(29221.790833, 36800.165741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29037.805800, 38859.614000, 1975.424057, 595.639217, 126.856100, X, Y)
[Mon May 20 04:51:11 2013] Writing fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src56.gif
[Mon May 20 05:37:43 2013] Mean detx,y = (-5932.22, 5839.41) 
[Mon May 20 05:37:45 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 05:38:19 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 05:38:20 2013] Setting source spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon May 20 05:38:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Mon May 20 07:18:39 2013] Not generating rmf since there are only 81 counts
[Mon May 20 07:18:39 2013] rmf not generated due to insufficient counts
[Mon May 20 07:48:50 2013] Updating aperture counts using extracted products
[Mon May 20 07:48:50 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 602.00
[Mon May 20 07:48:50 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src56_bgd.pi.gz = 3380.00
[Mon May 20 07:48:50 2013] Got source and background scale factors 1244042.000000, 7740199.000000
[Mon May 20 07:48:50 2013] User source parameters:
  Position = (303.0, 417.6) = 10 44 7.05 -59 36 13.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 58.8 +/- 25.6
  Background aperture counts = 543.2
  Rate = 0.002 +/- 0.0007

[Mon May 20 07:48:50 2013] Updating counts from extracted products
[Mon May 20 07:48:50 2013] Set source signif. to 58.75/23.31 = 2.52
[Mon May 20 07:48:59 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:59 2013] Using photon index=1.80, rate=0.00167, arf fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src56.arf
[Mon May 20 07:48:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:59 2013] Updating source flux to 5e-14
[Mon May 20 07:49:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:09 2013] xmm0112560201/analysis//spectral/fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete