[Sat May 18 15:04:07 2013] Detection parameters:
  Position = (328.6, 444.0) = 10 43 52.39 -59 34 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 17.3
  Background counts = 73.5
  Rate = 0.005 +/- 0.0009

[Sat May 18 15:04:08 2013] Off-axis axis estimate = 10.78'
[Sun May 19 02:47:41 2013] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:47:41 2013] Initial guess for spatial extent in simple fitting = 11.82"
[Sun May 19 02:47:41 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.015
[Sun May 19 02:47:41 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 11.82"
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src30.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src30.csv
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src30.csv
[Sun May 19 06:37:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun May 19 06:37:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:39:00 2013] Source 49 is offset by -6.656130 and 4.490175 pixels which is larger than
2 X fitted extent = 1.439053 x 3.316074, not incorporating fit results
[Sun May 19 06:39:01 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:39:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:39:01 2013] Assessing source extent using major
[Sun May 19 06:39:01 2013] Source does appear to be extended
[Sun May 19 06:39:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 17:44:41 2013] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:44:41 2013] Initial guess for spatial extent in simple fitting = 11.82"
[Sun May 19 17:44:41 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.015
[Sun May 19 17:44:41 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 11.82"
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src29.ximg exists
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun May 19 20:36:56 2013] Fit fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src29 appears to have run properly
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun May 19 20:36:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun May 19 20:36:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun May 19 20:36:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:50 2013] Spatial fit model total counts = 1273.380000, observed total counts = 1171.000000
[Sun May 19 20:37:50 2013] Offset between fit and detection position for source 49 = 0.305193 pixels
[Sun May 19 20:37:50 2013] 1154.465000 total counts/ 969.911000 bgd. counts: snr = 5.925944
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.305193 pixels
  Position = (328.6, 444.3) = 10 43 52.42 -59 34 18.5
  Extent = 23.6 (23.0-47.3)" x 5.6 (4.0-7.3)", rotation angle = 138 (131-145) degrees
  Source counts = 184.6 +/- 34.0
  Background counts = 969.9
  Rate = 0.005 +/- 0.001
[Sun May 19 20:37:50 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:50 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:37:50 2013] Source does appear to be extended
[Sun May 19 20:37:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.13
[Sun May 19 20:37:50 2013] Source is asymmetric
[Sun May 19 20:37:50 2013] Source is confused with source 21
[Mon May 20 04:51:11 2013] XMMSAS src. selection expression = ellipse(28538.505680, 38602.943600, 1417.962041, 335.494810, 137.876000, X, Y)
[Mon May 20 04:51:11 2013] Writing source region out to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src49_src.reg
[Mon May 20 04:51:11 2013] Extracting stamp from image fullrun_mos2_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (247, 363) - (410, 526)
[Mon May 20 04:51:11 2013] XMMSAS bgd. selection expression = annulus(28538.505680, 38602.943600, 2363.270068, 4726.540136, X, Y) && !ellipse(27896.697400, 40464.778000, 1573.592045, 1302.704037, 345.794100, X, Y) && !ellipse(26076.378400, 38263.778800, 841.232024, 444.580013, 347.263800, X, Y) && !ellipse(26213.040000, 38389.774000, 931.784027, 931.784027, 0.000000, X, Y) && !ellipse(29570.103400, 38344.726400, 403.426412, 242.256007, 30.404400, X, Y) && !ellipse(28076.188171, 39469.133942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23947.126434, 44058.808746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30588.220245, 38036.493408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29328.145600, 40488.487600, 447.524013, 165.450405, 352.290040, X, Y) && !ellipse(30165.696000, 36540.780000, 936.368027, 936.368027, 0.000000, X, Y) && !ellipse(28959.285431, 39788.260498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.990479, 39228.179413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.028800, 41788.262000, 2073.400060, 798.624823, 124.568000, X, Y) && !ellipse(28440.192000, 36547.130000, 1681.928048, 492.002414, 332.503500, X, Y) && !ellipse(29756.014587, 37357.828094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26314.111603, 36285.358215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29221.790833, 36800.165741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29149.124000, 41815.776000, 2057.672059, 2057.672059, 0.000000, X, Y) && !ellipse(30286.332794, 36273.840698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24999.179138, 40803.671143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22475.677860, 42270.215600, 1462.648042, 279.144808, 150.028000, X, Y) && !ellipse(25000.716400, 39840.461029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29037.805800, 38859.614000, 1975.424057, 595.639217, 126.856100, X, Y) && !ellipse(29495.391602, 40971.962830, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 04:51:11 2013] Writing fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src49.gif
[Mon May 20 05:28:42 2013] Mean detx,y = (-9191.58, 6167.24) 
[Mon May 20 05:28:44 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 05:29:24 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 05:29:25 2013] Setting source spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon May 20 05:29:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Mon May 20 07:48:45 2013] Updating aperture counts using extracted products
[Mon May 20 07:48:45 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 978.00
[Mon May 20 07:48:45 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src49_bgd.pi.gz = 9187.00
[Mon May 20 07:48:45 2013] Got source and background scale factors 1402688.000000, 28594746.000000
[Mon May 20 07:48:45 2013] User source parameters:
  Position = (328.6, 444.3) = 10 43 52.42 -59 34 18.5
  Extent = 23.6 (23.0-47.3)" x 5.6 (4.0-7.3)", rotation angle = 138 (131-145) degrees
  Source aperture counts = 527.3 +/- 32.3
  Background aperture counts = 450.7
  Rate = 0.02 +/- 0.0009

[Mon May 20 07:48:59 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:59 2013] Using photon index=1.80, rate=0.00526, arf fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src49.arf
[Mon May 20 07:48:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:59 2013] Updating source flux to 1.9e-13
[Mon May 20 07:49:37 2013] Flag b found in src. 49 procflags, skipping spectral fitting
[Mon May 20 07:49:37 2013] Flag c found in src. 49 procflags, skipping spectral fitting
[Mon May 20 07:50:09 2013] xmm0112560201/analysis//spectral/fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete