[Sat May 18 15:04:07 2013] Detection parameters:
  Position = (181.4, 314.0) = 10 45 16.99 -59 43 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.9 +/- 16.1
  Background counts = 70.4
  Rate = 0.004 +/- 0.0005

[Sat May 18 15:04:08 2013] Off-axis axis estimate = 8.56'
[Sun May 19 02:47:41 2013] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:47:41 2013] Initial guess for spatial extent in simple fitting = 10.71"
[Sun May 19 02:47:41 2013] source mask rpix=2.5, npix_max = 35, mask sum = 26, frac = 0.741
[Sun May 19 02:47:41 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 10.71"
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src42.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src42.csv
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src42.csv
[Sun May 19 06:37:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:37:43 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun May 19 06:37:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun May 19 06:37:43 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun May 19 06:37:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun May 19 06:37:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:39:00 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 14.395449 pixels away
[Sun May 19 06:39:01 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:39:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:39:01 2013] Assessing source extent using major
[Sun May 19 06:39:01 2013] Source does appear to be extended
[Sun May 19 06:39:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 17:44:41 2013] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:44:41 2013] Initial guess for spatial extent in simple fitting = 10.71"
[Sun May 19 17:44:41 2013] source mask rpix=2.5, npix_max = 35, mask sum = 26, frac = 0.741
[Sun May 19 17:44:41 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 10.71"
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src39.ximg exists
[Sun May 19 20:36:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src39.csv
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src39_1.ximg exists
[Sun May 19 20:36:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src39.csv
[Sun May 19 20:36:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sun May 19 20:36:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sun May 19 20:36:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sun May 19 20:36:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:50 2013] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 14.395449 pixels away
[Sun May 19 20:37:50 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:50 2013] Assessing source extent using major
[Sun May 19 20:37:50 2013] Source does appear to be extended
[Sun May 19 20:37:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 04:51:11 2013] XMMSAS src. selection expression = ellipse(15736.295670, 27265.360809, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 04:51:11 2013] Writing source region out to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src32_src.reg
[Mon May 20 04:51:11 2013] Extracting stamp from image fullrun_mos2_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (144, 276) - (219, 351)
[Mon May 20 04:51:11 2013] XMMSAS bgd. selection expression = annulus(15736.295670, 27265.360809, 1087.500000, 2175.000000, X, Y) && !ellipse(17694.431549, 30257.209778, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(16354.684000, 26465.557200, 590.892017, 590.892017, 0.000000, X, Y) && !ellipse(16402.547394, 25692.067444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14361.098022, 27099.665741, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 04:51:11 2013] Writing fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src32.gif
[Mon May 20 05:35:27 2013] Mean detx,y = (7924.75, 6066.97) 
[Mon May 20 05:35:30 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 05:36:05 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 05:36:06 2013] Setting source spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon May 20 05:36:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon May 20 07:14:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 07:14:03 2013] rmf not generated due to insufficient counts
[Mon May 20 07:48:49 2013] Updating aperture counts using extracted products
[Mon May 20 07:48:49 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 504.00
[Mon May 20 07:48:49 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src32_bgd.pi.gz = 1549.00
[Mon May 20 07:48:49 2013] Got source and background scale factors 980256.000000, 4190207.000000
[Mon May 20 07:48:49 2013] User source parameters:
  Position = (181.4, 314.0) = 10 45 16.99 -59 43 38.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 141.6 +/- 23.5
  Background aperture counts = 362.4
  Rate = 0.004 +/- 0.0007

[Mon May 20 07:48:49 2013] Updating counts from extracted products
[Mon May 20 07:48:49 2013] Set source signif. to 141.63/19.04 = 7.44
[Mon May 20 07:48:59 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:59 2013] Using photon index=1.80, rate=0.00404, arf fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src32.arf
[Mon May 20 07:48:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:59 2013] Updating source flux to 2.3e-13
[Mon May 20 07:49:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:09 2013] xmm0112560201/analysis//spectral/fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete