[Sat May 18 15:04:06 2013] Detection parameters:
  Position = (203.9, 348.3) = 10 45 3.97 -59 41 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56614.8 +/- 576.2
  Background counts = 82.5
  Rate = 2 +/- 0.02

[Sat May 18 15:04:08 2013] Off-axis axis estimate = 7.75'
[Sun May 19 02:47:41 2013] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:47:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 02:47:41 2013] Initial guess for spatial extent in simple fitting = 10.30"
[Sun May 19 02:47:41 2013] source mask rpix=2.4, npix_max = 32, mask sum = 27, frac = 0.820
[Sun May 19 02:47:41 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.30"
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src1.csv
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src1.csv
[Sun May 19 06:37:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 06:37:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:39:00 2013] Spatial fit model total counts = 33324.000000, observed total counts = 29478.000000
[Sun May 19 06:39:00 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 06:39:01 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:39:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:39:01 2013] Assessing source extent using major
[Sun May 19 06:39:01 2013] Source does appear to be extended
[Sun May 19 06:39:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 17:44:41 2013] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:44:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 17:44:41 2013] Initial guess for spatial extent in simple fitting = 10.30"
[Sun May 19 17:44:41 2013] source mask rpix=2.4, npix_max = 32, mask sum = 27, frac = 0.820
[Sun May 19 17:44:41 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.30"
[Sun May 19 20:36:55 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 19 20:36:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src1.csv
[Sun May 19 20:36:55 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 19 20:36:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src1.csv
[Sun May 19 20:36:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 19 20:36:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 19 20:36:56 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 19 20:36:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 19 20:36:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:37:50 2013] Spatial fit model total counts = 33252.300000, observed total counts = 29478.000000
[Sun May 19 20:37:50 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:37:50 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:50 2013] Assessing source extent using major
[Sun May 19 20:37:50 2013] Source does appear to be extended
[Sun May 19 20:37:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 04:51:10 2013] Counts = 56614.843750, rescaling region sizes by 3.000000
[Mon May 20 04:51:10 2013] XMMSAS src. selection expression = ellipse(17694.431549, 30257.209778, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon May 20 04:51:10 2013] Writing source region out to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src2_src.reg
[Mon May 20 04:51:10 2013] Extracting stamp from image fullrun_mos2_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (91, 236) - (316, 461)
[Mon May 20 04:51:10 2013] XMMSAS bgd. selection expression = annulus(17694.431549, 30257.209778, 9787.500000, 19575.000000, X, Y) && !ellipse(25772.096880, 27897.222400, 1399.281640, 1251.744036, 330.489300, X, Y) && !ellipse(20485.901100, 39006.235600, 745.372821, 349.409610, 330.591400, X, Y) && !ellipse(27896.697400, 40464.778000, 1573.592045, 1302.704037, 345.794100, X, Y) && !ellipse(22257.559600, 26599.251800, 614.795218, 381.223211, 54.570900, X, Y) && !ellipse(26076.378400, 38263.778800, 841.232024, 444.580013, 347.263800, X, Y) && !ellipse(17370.233887, 31593.515228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26213.040000, 38389.774000, 931.784027, 931.784027, 0.000000, X, Y) && !ellipse(29570.103400, 38344.726400, 403.426412, 242.256007, 30.404400, X, Y) && !ellipse(18783.694489, 31745.438660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26914.487660, 31975.791600, 316.879209, 316.879209, 0.000000, X, Y) && !ellipse(17043.996600, 24283.291200, 533.423215, 259.062407, 324.002500, X, Y) && !ellipse(20983.343781, 23465.103210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27297.140000, 16773.373600, 683.900820, 315.449609, 355.414105, X, Y) && !ellipse(35772.758600, 20894.488800, 450.760813, 268.591208, 324.069389, X, Y) && !ellipse(28076.188171, 39469.133942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23947.126434, 44058.808746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16354.684000, 26465.557200, 590.892017, 590.892017, 0.000000, X, Y) && !ellipse(30588.220245, 38036.493408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29328.145600, 40488.487600, 447.524013, 165.450405, 352.290040, X, Y) && !ellipse(30165.696000, 36540.780000, 936.368027, 936.368027, 0.000000, X, Y) && !ellipse(28959.285431, 39788.260498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.990479, 39228.179413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.028800, 41788.262000, 2073.400060, 798.624823, 124.568000, X, Y) && !ellipse(20172.094600, 27047.656600, 290.633608, 290.633608, 0.000000, X, Y) && !ellipse(28440.192000, 36547.130000, 1681.928048, 492.002414, 332.503500, X, Y) && !ellipse(21592.743362, 40207.967529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25792.706780, 31822.246000, 264.115208, 264.115208, 0.000000, X, Y) && !ellipse(22954.020600, 29641.729200, 427.560012, 277.877608, 0.110867, X, Y) && !ellipse(28538.505680, 38602.943600, 1890.616054, 447.326413, 137.876000, X, Y) && !ellipse(31373.750488, 31175.053406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16402.547394, 25692.067444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18718.765200, 33575.090400, 477.086414, 477.086414, 0.000000, X, Y) && !ellipse(25670.795349, 16505.595718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27323.179382, 19836.178635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29756.014587, 37357.828094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18698.975159, 14303.414856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.219971, 32421.863129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12231.286621, 20909.804779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15736.295670, 27265.360809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21580.353400, 27577.242000, 633.634418, 332.044010, 90.000000, X, Y) && !ellipse(15820.568400, 31384.888800, 987.344028, 338.802410, 138.673000, X, Y) && !ellipse(23743.631714, 30525.853607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26314.111603, 36285.358215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34764.804352, 26500.045959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36072.239014, 19222.969086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22490.485200, 28044.503400, 619.360018, 619.360018, 0.000000, X, Y) && !ellipse(29221.790833, 36800.165741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29149.124000, 41815.776000, 2057.672059, 2057.672059, 0.000000, X, Y) && !ellipse(28970.350800, 20426.430000, 1441.368041, 1441.368041, 0.000000, X, Y) && !ellipse(34265.080048, 39261.845184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.332794, 36273.840698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24999.179138, 40803.671143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22936.524048, 21725.067368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.091400, 25629.058600, 613.098418, 365.210411, 90.922930, X, Y) && !ellipse(23233.579346, 26137.695526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30923.505310, 32655.840240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.740448, 27491.317078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34237.696075, 23136.532715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23889.506989, 26300.164734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13033.556000, 22032.326000, 1951.368056, 1951.368056, 0.000000, X, Y) && !ellipse(25296.396393, 28770.611084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14361.098022, 27099.665741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22475.677860, 42270.215600, 1462.648042, 279.144808, 150.028000, X, Y) && !ellipse(32344.328308, 16341.386139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25000.716400, 39840.461029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29037.805800, 38859.614000, 1975.424057, 595.639217, 126.856100, X, Y) && !ellipse(29495.391602, 40971.962830, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 04:51:10 2013] Writing fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src2.gif
[Mon May 20 04:51:35 2013] Mean detx,y = (4313.63, 7147.02) 
[Mon May 20 04:51:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 05:00:06 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 05:00:06 2013] Setting source spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 20 05:00:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 20 06:02:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 06:02:01 2013] rmf not generated due to insufficient counts
[Mon May 20 07:48:34 2013] Updating aperture counts using extracted products
[Mon May 20 07:48:35 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 37326.00
[Mon May 20 07:48:35 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 112382.00
[Mon May 20 07:48:35 2013] Got source and background scale factors 10973780.000000, 330932582.000000
[Mon May 20 07:48:35 2013] User source parameters:
  Position = (203.9, 348.3) = 10 45 3.97 -59 41 1.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 33599.4 +/- 194.2
  Background aperture counts = 3726.6
  Rate = 1 +/- 0.006

[Mon May 20 07:48:35 2013] Updating counts from extracted products
[Mon May 20 07:48:35 2013] Set source signif. to 33599.39/61.05 = 550.40
[Mon May 20 07:48:57 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:57 2013] Using photon index=1.80, rate=0.958, arf fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src2.arf
[Mon May 20 07:48:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:57 2013] Updating source flux to 2.9e-11
[Mon May 20 07:49:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:09 2013] xmm0112560201/analysis//spectral/fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete