[Sat May 18 15:04:06 2013] Detection parameters:
  Position = (333.4, 457.9) = 10 43 49.65 -59 33 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.2 +/- 23.8
  Background counts = 47.8
  Rate = 0.006 +/- 0.0007

[Sat May 18 15:04:08 2013] Off-axis axis estimate = 11.84'
[Sun May 19 02:47:41 2013] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:47:41 2013] Initial guess for spatial extent in simple fitting = 12.35"
[Sun May 19 02:47:41 2013] source mask rpix=2.8, npix_max = 44, mask sum = 31, frac = 0.695
[Sun May 19 02:47:41 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 12.35"
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src22.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src22.csv
[Sun May 19 06:37:41 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun May 19 06:37:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src22.csv
[Sun May 19 06:37:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun May 19 06:37:42 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun May 19 06:37:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun May 19 06:37:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:39:00 2013] Warning, spatial fit 22 centroid is now closest to src. 8
[Sun May 19 06:39:00 2013] Source 14 is offset by -0.532190 and 1.542787 pixels which is larger than
2 X fitted extent = 1.394101 x 1.394101, not incorporating fit results
[Sun May 19 06:39:01 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:39:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:39:01 2013] Assessing source extent using major
[Sun May 19 06:39:01 2013] Source does appear to be extended
[Sun May 19 06:39:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 17:44:41 2013] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:44:41 2013] Initial guess for spatial extent in simple fitting = 12.35"
[Sun May 19 17:44:41 2013] source mask rpix=2.8, npix_max = 44, mask sum = 31, frac = 0.695
[Sun May 19 17:44:41 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 12.35"
[Sun May 19 20:36:55 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src21.ximg exists
[Sun May 19 20:36:55 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun May 19 20:36:55 2013] Fit fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_src21 appears to have run properly
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun May 19 20:36:57 2013] fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun May 19 20:36:57 2013] Fit fullrun_mos2_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun May 19 20:37:50 2013] Warning, spatial fit 21 centroid is now closest to src. 48
[Sun May 19 20:37:50 2013] Source 14 is offset by 2.518177 and -4.632155 pixels which is larger than
2 X fitted extent = 5.252966 x 1.394892, not incorporating fit results
[Sun May 19 20:37:50 2013] Source 14 is offset by -2.996857 and -5.299006 pixels which is larger than
2 X fitted extent = 9.828460 x 4.114736, not incorporating fit results
[Sun May 19 20:37:50 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:50 2013] Assessing source extent using major
[Sun May 19 20:37:50 2013] Source does appear to be extended
[Sun May 19 20:37:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:37:50 2013] Source is confused with source 49
[Sun May 19 20:37:50 2013] Source is confused with source 48
[Mon May 20 04:51:11 2013] XMMSAS src. selection expression = ellipse(28959.285431, 39788.260498, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 04:51:11 2013] Writing source region out to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src14_src.reg
[Mon May 20 04:51:11 2013] Extracting stamp from image fullrun_mos2_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (296, 420) - (371, 495)
[Mon May 20 04:51:11 2013] XMMSAS bgd. selection expression = annulus(28959.285431, 39788.260498, 1087.500000, 2175.000000, X, Y) && !ellipse(27896.697400, 40464.778000, 1573.592045, 1302.704037, 345.794100, X, Y) && !ellipse(26076.378400, 38263.778800, 841.232024, 444.580013, 347.263800, X, Y) && !ellipse(26213.040000, 38389.774000, 931.784027, 931.784027, 0.000000, X, Y) && !ellipse(29570.103400, 38344.726400, 403.426412, 242.256007, 30.404400, X, Y) && !ellipse(28076.188171, 39469.133942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30588.220245, 38036.493408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29328.145600, 40488.487600, 447.524013, 165.450405, 352.290040, X, Y) && !ellipse(26634.990479, 39228.179413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.028800, 41788.262000, 2073.400060, 798.624823, 124.568000, X, Y) && !ellipse(28440.192000, 36547.130000, 1681.928048, 492.002414, 332.503500, X, Y) && !ellipse(28538.505680, 38602.943600, 1890.616054, 447.326413, 137.876000, X, Y) && !ellipse(29756.014587, 37357.828094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29221.790833, 36800.165741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29149.124000, 41815.776000, 2057.672059, 2057.672059, 0.000000, X, Y) && !ellipse(29037.805800, 38859.614000, 1975.424057, 595.639217, 126.856100, X, Y) && !ellipse(29495.391602, 40971.962830, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 04:51:11 2013] Writing fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src14.gif
[Mon May 20 05:23:24 2013] Mean detx,y = (-10253.83, 6887.82) 
[Mon May 20 05:23:26 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 05:23:48 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 05:23:48 2013] Setting source spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 20 05:23:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon May 20 06:56:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 06:56:09 2013] rmf not generated due to insufficient counts
[Mon May 20 07:48:42 2013] Updating aperture counts using extracted products
[Mon May 20 07:48:42 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 1027.00
[Mon May 20 07:48:42 2013] Total counts from fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src14_bgd.pi.gz = 1083.00
[Mon May 20 07:48:42 2013] Got source and background scale factors 1151692.000000, 2419628.000000
[Mon May 20 07:48:42 2013] User source parameters:
  Position = (333.4, 457.9) = 10 43 49.65 -59 33 21.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 511.5 +/- 33.1
  Background aperture counts = 515.5
  Rate = 0.01 +/- 0.0009

[Mon May 20 07:48:42 2013] Updating counts from extracted products
[Mon May 20 07:48:42 2013] Set source signif. to 511.51/22.70 = 22.53
[Mon May 20 07:48:58 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:58 2013] Using photon index=1.80, rate=0.0146, arf fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src14.arf
[Mon May 20 07:48:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:58 2013] Updating source flux to 1.5e-12
[Mon May 20 07:49:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:50:09 2013] xmm0112560201/analysis//spectral/fullrun_mos2_xmm0112560201_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete