[Sat May 18 15:03:30 2013] Detection parameters:
  Position = (262.2, 400.7) = 10 44 30.45 -59 37 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.6 +/- 17.3
  Background counts = 80.0
  Rate = 0.004 +/- 0.0007

[Sat May 18 15:03:30 2013] Off-axis axis estimate = 7.86'
[Sat May 18 21:40:30 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sat May 18 21:40:30 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Sat May 18 21:40:30 2013] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.054
[Sat May 18 21:40:30 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 10.36"
[Sun May 19 02:47:36 2013] fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_src48.ximg exists
[Sun May 19 02:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_src48.csv
[Sun May 19 02:47:36 2013] fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun May 19 02:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_src48.csv
[Sun May 19 02:47:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 02:47:40 2013] fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun May 19 02:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun May 19 02:47:40 2013] fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun May 19 02:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun May 19 02:47:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112560201_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:38:47 2013] Spatial fit model total counts = 1021.920000, observed total counts = 868.000000
[Sun May 19 06:38:47 2013] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 06:38:47 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 13.075712 pixels away
[Sun May 19 06:38:47 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:38:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:38:47 2013] Assessing source extent using major
[Sun May 19 06:38:47 2013] Source does appear to be extended
[Sun May 19 06:38:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 13:27:51 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sun May 19 13:27:51 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Sun May 19 13:27:51 2013] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.054
[Sun May 19 13:27:51 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 10.36"
[Sun May 19 17:44:39 2013] fullrun_mos1_xmm0112560201_pi300-10000_cl_pass1_src43.ximg exists
[Sun May 19 17:44:39 2013] fullrun_mos1_xmm0112560201_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun May 19 17:44:39 2013] Fit fullrun_mos1_xmm0112560201_pi300-10000_cl_pass1_src43 appears to have run properly
[Sun May 19 17:44:40 2013] fullrun_mos1_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun May 19 17:44:40 2013] fullrun_mos1_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun May 19 17:44:40 2013] Fit fullrun_mos1_xmm0112560201_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Sun May 19 20:37:36 2013] Source 47 is offset by -5.101927 and -1.662809 pixels which is larger than
2 X fitted extent = 1.164276 x 9.314207, not incorporating fit results
[Sun May 19 20:37:36 2013] Warning, spatial fit 43 centroid is now closest to src. 48
[Sun May 19 20:37:36 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:37:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:37:36 2013] Assessing source extent using major
[Sun May 19 20:37:36 2013] Source does appear to be extended
[Sun May 19 20:37:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:32:30 2013] XMMSAS src. selection expression = ellipse(22763.968384, 34808.171600, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 01:32:30 2013] Writing source region out to fullrun_mos1_xmm0112560201_pi300-10000_pass1_cl_src47_src.reg
[Mon May 20 01:32:30 2013] Extracting stamp from image fullrun_mos1_xmm0112560201_pi300-10000_cl_sm2.00.img.gz, (225, 363) - (300, 438)
[Mon May 20 01:32:30 2013] XMMSAS bgd. selection expression = annulus(22763.968384, 34808.171600, 1087.500000, 2175.000000, X, Y) && !ellipse(26053.828000, 38293.244000, 1890.464054, 655.937619, 121.378000, X, Y) && !ellipse(24782.431780, 31438.420400, 1849.352053, 403.277612, 57.602600, X, Y)
[Mon May 20 01:32:30 2013] Writing fullrun_mos1_xmm0112560201_pi300-10000_pass1_cl_src47.gif
[Mon May 20 02:29:55 2013] Mean detx,y = (7303.74, 2225.58) 
[Mon May 20 02:29:58 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 02:30:36 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 02:30:37 2013] Setting source spectrum file to fullrun_mos1_xmm0112560201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Mon May 20 02:30:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112560201_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Mon May 20 04:14:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 04:14:03 2013] rmf not generated due to insufficient counts
[Mon May 20 07:48:23 2013] Updating aperture counts using extracted products
[Mon May 20 07:48:24 2013] Total counts from fullrun_mos1_xmm0112560201_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 709.00
[Mon May 20 07:48:24 2013] Total counts from fullrun_mos1_xmm0112560201_pi300-10000_pass1_cl_src47_bgd.pi.gz = 4229.00
[Mon May 20 07:48:24 2013] Got source and background scale factors 1261988.000000, 10326676.000000
[Mon May 20 07:48:24 2013] User source parameters:
  Position = (262.2, 400.7) = 10 44 30.45 -59 37 28.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 192.2 +/- 27.6
  Background aperture counts = 516.8
  Rate = 0.005 +/- 0.0008

[Mon May 20 07:48:24 2013] Updating counts from extracted products
[Mon May 20 07:48:24 2013] Set source signif. to 192.19/22.73 = 8.45
[Mon May 20 07:48:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 07:48:32 2013] Using photon index=1.80, rate=0.00547, arf fullrun_mos1_xmm0112560201_pi300-10000_pass1_cl_src47.arf
[Mon May 20 07:48:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 07:48:32 2013] Updating source flux to 1.4e-13
[Mon May 20 07:49:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 07:49:37 2013] xmm0112560201/analysis//spectral/fullrun_mos1_xmm0112560201_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete