[Tue May  7 19:12:52 2013] Detection parameters:
  Position = (302.7, 457.9) = 10 44 7.73 -59 33 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.9 +/- 18.4
  Background counts = 176.9
  Rate = 0.004 +/- 0.0006

[Tue May  7 19:12:54 2013] Off-axis axis estimate = 11.56'
[Tue May  7 19:16:42 2013] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting
[Tue May  7 19:16:42 2013] Initial guess for spatial extent in simple fitting = 12.21"
[Tue May  7 19:16:42 2013] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.732
[Tue May  7 19:16:42 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 12.21"
[Wed May  8 03:23:28 2013] fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_src71.ximg exists
[Wed May  8 03:23:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_src71.csv
[Wed May  8 03:23:28 2013] fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_src71_1.ximg exists
[Wed May  8 03:23:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_src71.csv
[Wed May  8 03:23:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 03:23:31 2013] fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Wed May  8 03:23:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Wed May  8 03:23:31 2013] fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Wed May  8 03:23:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Wed May  8 03:23:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 11:17:30 2013] Warning, spatial fit 71 centroid is now closest to src. 29
[Wed May  8 11:17:30 2013] Vigneting correction estimate = 1.000000
[Wed May  8 11:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 11:17:30 2013] Assessing source extent using major
[Wed May  8 11:17:30 2013] Source does appear to be extended
[Wed May  8 11:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 11:17:30 2013] Source is confused with source 83
[Wed May  8 11:18:32 2013] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting
[Wed May  8 11:18:32 2013] Initial guess for spatial extent in simple fitting = 12.21"
[Wed May  8 11:18:32 2013] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.732
[Wed May  8 11:18:32 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 12.21"
[Wed May  8 16:53:15 2013] fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_src68.ximg exists
[Wed May  8 16:53:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_src68.csv
[Wed May  8 16:53:15 2013] fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_src68_1.ximg exists
[Wed May  8 16:53:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_src68.csv
[Wed May  8 16:53:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 16:53:16 2013] fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Wed May  8 16:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Wed May  8 16:53:16 2013] fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Wed May  8 16:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Wed May  8 16:53:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 23:36:52 2013] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 80 at 10.727744 pixels away
[Wed May  8 23:36:52 2013] Vigneting correction estimate = 1.000000
[Wed May  8 23:36:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 23:36:52 2013] Assessing source extent using major
[Wed May  8 23:36:52 2013] Source does appear to be extended
[Wed May  8 23:36:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 23:37:49 2013] XMMSAS src. selection expression = ellipse(26283.653107, 39786.569244, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  8 23:37:49 2013] Writing source region out to fullrun_pn_xmm0112560101_pi300-10000_pass1_cl_src80_src.reg
[Wed May  8 23:37:49 2013] Extracting stamp from image fullrun_pn_xmm0112560101_pi300-10000_cl_sm2.00.img.gz, (265, 420) - (340, 495)
[Wed May  8 23:37:49 2013] XMMSAS bgd. selection expression = annulus(26283.653107, 39786.569244, 1087.500000, 2175.000000, X, Y) && !ellipse(27217.758789, 38993.626160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27776.480499, 39090.712616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26170.337000, 38259.994600, 850.128024, 472.608014, 355.532390, X, Y) && !ellipse(27873.041200, 40244.683400, 869.248025, 618.501618, 14.917700, X, Y) && !ellipse(28312.552000, 39510.730000, 430.336012, 430.336012, 0.000000, X, Y) && !ellipse(27474.804000, 40809.706000, 2067.544059, 507.283215, 33.456800, X, Y) && !ellipse(29163.093445, 39709.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29089.676575, 38867.799011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28212.173462, 41329.892639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26922.372370, 41831.191200, 585.671217, 264.782408, 356.304840, X, Y) && !ellipse(29486.874000, 37961.917800, 1340.040039, 616.465618, 47.915500, X, Y) && !ellipse(27184.939972, 42436.734528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24634.712000, 39806.136200, 1954.192056, 1027.128030, 355.669710, X, Y) && !ellipse(26305.238495, 39230.462738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23283.127502, 39121.502991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28357.045135, 38747.380157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24968.354248, 37451.611694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28285.529266, 37196.229736, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  8 23:37:49 2013] Writing fullrun_pn_xmm0112560101_pi300-10000_pass1_cl_src80.gif
[Thu May  9 01:00:21 2013] Mean detx,y = (8287.03, -8680.03) 
[Thu May  9 01:00:24 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 01:00:52 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 01:00:53 2013] Setting source spectrum file to fullrun_pn_xmm0112560101_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Thu May  9 01:00:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112560101_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Thu May  9 03:59:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  9 03:59:52 2013] rmf not generated due to insufficient counts
[Thu May  9 08:34:43 2013] Updating aperture counts using extracted products
[Thu May  9 08:34:43 2013] Total counts from fullrun_pn_xmm0112560101_pi300-10000_pass1_cl_src80_src_b10.pi.gz = 1038.00
[Thu May  9 08:34:43 2013] Total counts from fullrun_pn_xmm0112560101_pi300-10000_pass1_cl_src80_bgd.pi.gz = 2234.00
[Thu May  9 08:34:43 2013] Got source and background scale factors 1125004.000000, 2953400.000000
[Thu May  9 08:34:43 2013] User source parameters:
  Position = (302.7, 457.9) = 10 44 7.73 -59 33 12.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 187.0 +/- 33.2
  Background aperture counts = 851.0
  Rate = 0.006 +/- 0.001

[Thu May  9 08:34:43 2013] Updating counts from extracted products
[Thu May  9 08:34:43 2013] Set source signif. to 187.03/29.17 = 6.41
[Thu May  9 08:35:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 08:35:04 2013] Using photon index=1.80, rate=0.00623, arf fullrun_pn_xmm0112560101_pi300-10000_pass1_cl_src80.arf
[Thu May  9 08:35:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 08:35:04 2013] Updating source flux to 9.6e-14
[Thu May  9 08:36:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 08:36:24 2013] xmm0112560101/analysis//spectral/fullrun_pn_xmm0112560101_pi300-10000_pass1_cl_src80_pl.csv not found, spectral fit skipped or did not complete