[Tue May  7 19:12:59 2013] Detection parameters:
  Position = (296.6, 190.2) = 10 44 11.21 -59 52 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.9 +/- 17.1
  Background counts = 91.9
  Rate = 0.006 +/- 0.001

[Tue May  7 19:13:00 2013] Off-axis axis estimate = 7.85'
[Wed May  8 08:10:37 2013] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Wed May  8 08:10:37 2013] Initial guess for spatial extent in simple fitting = 10.35"
[Wed May  8 08:10:37 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Wed May  8 08:10:37 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.35"
[Wed May  8 11:17:04 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src29.ximg exists
[Wed May  8 11:17:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src29.csv
[Wed May  8 11:17:04 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed May  8 11:17:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src29.csv
[Wed May  8 11:17:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 11:17:06 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed May  8 11:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed May  8 11:17:06 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed May  8 11:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed May  8 11:17:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 11:18:04 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 12.490471 pixels away
[Wed May  8 11:18:04 2013] Vigneting correction estimate = 1.000000
[Wed May  8 11:18:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 11:18:04 2013] Assessing source extent using major
[Wed May  8 11:18:04 2013] Source does appear to be extended
[Wed May  8 11:18:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 21:22:44 2013] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Wed May  8 21:22:44 2013] Initial guess for spatial extent in simple fitting = 10.35"
[Wed May  8 21:22:44 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Wed May  8 21:22:44 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 10.35"
[Wed May  8 23:36:25 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src29.ximg exists
[Wed May  8 23:36:25 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed May  8 23:36:25 2013] Fit fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src29 appears to have run properly
[Wed May  8 23:36:26 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed May  8 23:36:26 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed May  8 23:36:26 2013] Fit fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Wed May  8 23:37:19 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 12.490471 pixels away
[Wed May  8 23:37:19 2013] Vigneting correction estimate = 1.000000
[Wed May  8 23:37:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 23:37:19 2013] Assessing source extent using major
[Wed May  8 23:37:19 2013] Source does appear to be extended
[Wed May  8 23:37:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 06:59:44 2013] XMMSAS src. selection expression = ellipse(25756.271362, 16501.748581, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  9 06:59:44 2013] Writing source region out to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src58_src.reg
[Thu May  9 06:59:44 2013] Extracting stamp from image fullrun_mos2_xmm0112560101_pi300-10000_cl_sm2.00.img.gz, (259, 153) - (334, 228)
[Thu May  9 06:59:44 2013] XMMSAS bgd. selection expression = annulus(25756.271362, 16501.748581, 1087.500000, 2175.000000, X, Y) && !ellipse(27373.815100, 16767.727200, 546.271216, 287.700008, 356.083812, X, Y) && !ellipse(28911.070000, 18550.431800, 1307.856038, 539.481616, 31.010125, X, Y)
[Thu May  9 06:59:44 2013] Writing fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src58.gif
[Thu May  9 07:24:12 2013] Mean detx,y = (7457.39, -8685.10) 
[Thu May  9 07:24:13 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 07:24:32 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 07:24:32 2013] Setting source spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Thu May  9 07:24:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Thu May  9 08:22:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  9 08:22:22 2013] rmf not generated due to insufficient counts
[Thu May  9 08:35:23 2013] Updating aperture counts using extracted products
[Thu May  9 08:35:23 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 658.00
[Thu May  9 08:35:23 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src58_bgd.pi.gz = 4719.00
[Thu May  9 08:35:23 2013] Got source and background scale factors 1261020.000000, 9946209.000000
[Thu May  9 08:35:23 2013] User source parameters:
  Position = (296.6, 190.2) = 10 44 11.21 -59 52 41.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 59.7 +/- 26.7
  Background aperture counts = 598.3
  Rate = 0.002 +/- 0.0008

[Thu May  9 08:35:23 2013] Updating counts from extracted products
[Thu May  9 08:35:23 2013] Set source signif. to 59.71/24.46 = 2.44
[Thu May  9 08:35:30 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 08:35:30 2013] Using photon index=1.80, rate=0.00177, arf fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src58.arf
[Thu May  9 08:35:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 08:35:30 2013] Updating source flux to 6.5e-14
[Thu May  9 08:35:52 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 08:36:01 2013] xmm0112560101/analysis//spectral/fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete