[Tue May 7 19:12:59 2013] Detection parameters: Position = (261.7, 399.2) = 10 44 31.21 -59 37 27.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 96.6 +/- 16.4 Background counts = 59.7 Rate = 0.006 +/- 0.0009 [Tue May 7 19:13:00 2013] Off-axis axis estimate = 7.77' [Wed May 8 08:10:37 2013] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting [Wed May 8 08:10:37 2013] Initial guess for spatial extent in simple fitting = 10.31" [Wed May 8 08:10:37 2013] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.879 [Wed May 8 08:10:37 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 10.31" [Wed May 8 11:17:04 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src32.ximg exists [Wed May 8 11:17:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src32.csv [Wed May 8 11:17:04 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src32_1.ximg exists [Wed May 8 11:17:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src32.csv [Wed May 8 11:17:04 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src32_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 11:17:06 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Wed May 8 11:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src32.csv [Wed May 8 11:17:06 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Wed May 8 11:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src32.csv [Wed May 8 11:17:06 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 11:18:04 2013] Source 51 is offset by -8.771433 and -3.898931 pixels which is larger than 2 X fitted extent = 1.416784 x 1.416784, not incorporating fit results [Wed May 8 11:18:04 2013] Vigneting correction estimate = 1.000000 [Wed May 8 11:18:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 11:18:04 2013] Assessing source extent using major [Wed May 8 11:18:04 2013] Source does appear to be extended [Wed May 8 11:18:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 21:22:44 2013] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting [Wed May 8 21:22:44 2013] Initial guess for spatial extent in simple fitting = 10.31" [Wed May 8 21:22:44 2013] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.879 [Wed May 8 21:22:44 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 10.31" [Wed May 8 23:36:25 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src32.ximg exists [Wed May 8 23:36:25 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src32_1.ximg exists [Wed May 8 23:36:25 2013] Fit fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src32 appears to have run properly [Wed May 8 23:36:26 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists [Wed May 8 23:36:26 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists [Wed May 8 23:36:26 2013] Fit fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly [Wed May 8 23:37:19 2013] Spatial fit model total counts = 751.367000, observed total counts = 687.000000 [Wed May 8 23:37:19 2013] Offset between fit and detection position for source 51 = 0.278353 pixels [Wed May 8 23:37:19 2013] 754.565000 total counts/ 640.218000 bgd. counts: snr = 4.519192 Spatial fit parameters: Offset between fit and detection position for source 51 = 0.278353 pixels Position = (261.6, 399.4) = 10 44 31.27 -59 37 32.0 Extent = 20.6 (14.5-41.3)" x 5.9 (2.6-9.7)", rotation angle = 352 (338-4) degrees Source counts = 114.3 +/- 27.5 Background counts = 640.2 Rate = 0.003 +/- 0.0008 [Wed May 8 23:37:19 2013] Vigneting correction estimate = 1.000000 [Wed May 8 23:37:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 23:37:19 2013] Assessing source extent using major axis lower bound [Wed May 8 23:37:19 2013] Source does appear to be extended [Wed May 8 23:37:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.49 [Thu May 9 06:59:44 2013] XMMSAS src. selection expression = ellipse(22711.521400, 34700.130400, 1237.752036, 356.124610, 351.632525, X, Y) [Thu May 9 06:59:44 2013] Writing source region out to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src51_src.reg [Thu May 9 06:59:44 2013] Extracting stamp from image fullrun_mos2_xmm0112560101_pi300-10000_cl_sm2.00.img.gz, (190, 328) - (333, 471) [Thu May 9 06:59:44 2013] XMMSAS bgd. selection expression = annulus(22711.521400, 34700.130400, 2062.920059, 4125.840119, X, Y) && !ellipse(17806.279968, 30341.023743, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28157.051600, 40478.230000, 2065.272059, 2065.272059, 0.000000, X, Y) && !ellipse(20767.140000, 39042.058800, 1035.528030, 738.155221, 352.967000, X, Y) && !ellipse(26141.521423, 38233.990417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17742.296417, 30787.278412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16900.368000, 32146.092000, 1705.016049, 1705.016049, 0.000000, X, Y) && !ellipse(27812.287400, 39084.880000, 1589.160046, 557.207216, 130.033000, X, Y) && !ellipse(27008.156570, 31973.349800, 313.366409, 313.366409, 0.000000, X, Y) && !ellipse(28136.626000, 39435.986000, 1340.024039, 443.668813, 337.750200, X, Y) && !ellipse(18185.910660, 32045.066681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23881.182700, 32097.868000, 381.663211, 234.654407, 321.204614, X, Y) && !ellipse(23824.328674, 30552.934906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26398.865448, 39272.696289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21891.596115, 37655.350677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18817.386810, 33634.558380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.043243, 39194.402130, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 9 06:59:44 2013] Writing fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src51.gif [Thu May 9 07:25:07 2013] Mean detx,y = (-2042.61, 7163.15) [Thu May 9 07:25:08 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 9 07:25:38 2013] Binned source spectrum to 10 counts/bin [Thu May 9 07:25:39 2013] Setting source spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src51_src_b10.pi.gz [Thu May 9 07:25:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src51_bgd.pi.gz [Thu May 9 08:35:24 2013] Updating aperture counts using extracted products [Thu May 9 08:35:24 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 468.00 [Thu May 9 08:35:24 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src51_bgd.pi.gz = 11878.00 [Thu May 9 08:35:24 2013] Got source and background scale factors 1106419.000000, 32003144.000000 [Thu May 9 08:35:24 2013] User source parameters: Position = (261.6, 399.4) = 10 44 31.27 -59 37 32.0 Extent = 20.6 (14.5-41.3)" x 5.9 (2.6-9.7)", rotation angle = 352 (338-4) degrees Source aperture counts = 57.4 +/- 22.7 Background aperture counts = 410.6 Rate = 0.002 +/- 0.0007 [Thu May 9 08:35:30 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 9 08:35:30 2013] Using photon index=1.80, rate=0.00339, arf fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src51.arf [Thu May 9 08:35:30 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 9 08:35:30 2013] Updating source flux to 1.1e-13 [Thu May 9 08:35:52 2013] Flag b found in src. 51 procflags, skipping spectral fitting [Thu May 9 08:36:01 2013] xmm0112560101/analysis//spectral/fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete