[Tue May 7 19:12:58 2013] Detection parameters: Position = (304.1, 460.2) = 10 44 6.91 -59 33 8.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 59.5 +/- 14.0 Background counts = 50.7 Rate = 0.002 +/- 0.0004 [Tue May 7 19:13:00 2013] Off-axis axis estimate = 11.74' [Wed May 8 08:10:37 2013] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting [Wed May 8 08:10:37 2013] Initial guess for spatial extent in simple fitting = 12.30" [Wed May 8 08:10:37 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949 [Wed May 8 08:10:37 2013] Giving source the simple spatial ID 80 for pass 0, mean size = 12.30" [Wed May 8 11:17:05 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src80.ximg exists [Wed May 8 11:17:05 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src80_1.ximg exists [Wed May 8 11:17:05 2013] Fit fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src80 appears to have run properly [Wed May 8 11:17:06 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists [Wed May 8 11:17:06 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists [Wed May 8 11:17:06 2013] Fit fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly [Wed May 8 11:18:04 2013] Source 35 is offset by 0.659425 and -3.316950 pixels which is larger than 2 X fitted extent = 1.379048 x 1.379048, not incorporating fit results [Wed May 8 11:18:04 2013] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 11.536166 pixels away [Wed May 8 11:18:04 2013] Source 35 is offset by -4.010880 and -6.645777 pixels which is larger than 2 X fitted extent = 4.826805 x 1.792832, not incorporating fit results [Wed May 8 11:18:04 2013] Vigneting correction estimate = 1.000000 [Wed May 8 11:18:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 11:18:04 2013] Assessing source extent using major [Wed May 8 11:18:04 2013] Source does appear to be extended [Wed May 8 11:18:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 21:22:44 2013] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting [Wed May 8 21:22:44 2013] Initial guess for spatial extent in simple fitting = 12.30" [Wed May 8 21:22:44 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949 [Wed May 8 21:22:44 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 12.30" [Wed May 8 23:36:26 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src72.ximg exists [Wed May 8 23:36:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src72.csv [Wed May 8 23:36:26 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src72_1.ximg exists [Wed May 8 23:36:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src72.csv [Wed May 8 23:36:26 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src72_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 23:36:27 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists [Wed May 8 23:36:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src72.csv [Wed May 8 23:36:27 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists [Wed May 8 23:36:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src72.csv [Wed May 8 23:36:27 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 23:36:52 2013] Warning, spatial fit 50 centroid is now closest to src. 104 [Wed May 8 23:37:06 2013] Warning, spatial fit 18 centroid is now closest to src. 71 [Wed May 8 23:37:06 2013] Warning, spatial fit 25 centroid is now closest to src. 39 [Wed May 8 23:37:06 2013] Warning, spatial fit 30 centroid is now closest to src. 84 [Wed May 8 23:37:19 2013] Warning, spatial fit 24 centroid is now closest to src. 19 [Wed May 8 23:37:19 2013] Source 35 is offset by 0.655305 and -3.189203 pixels which is larger than 2 X fitted extent = 1.382363 x 1.382363, not incorporating fit results [Wed May 8 23:37:19 2013] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 11.536166 pixels away [Wed May 8 23:37:19 2013] Warning, spatial fit 72 centroid is now closest to src. 41 [Wed May 8 23:37:19 2013] Vigneting correction estimate = 1.000000 [Wed May 8 23:37:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 23:37:19 2013] Assessing source extent using major [Wed May 8 23:37:19 2013] Source does appear to be extended [Wed May 8 23:37:19 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 06:59:45 2013] XMMSAS src. selection expression = ellipse(26408.293457, 39989.137360, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 9 06:59:45 2013] Writing source region out to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src35_src.reg [Thu May 9 06:59:45 2013] Extracting stamp from image fullrun_mos2_xmm0112560101_pi300-10000_cl_sm2.00.img.gz, (267, 423) - (342, 498) [Thu May 9 06:59:45 2013] XMMSAS bgd. selection expression = annulus(26408.293457, 39989.137360, 1087.500000, 2175.000000, X, Y) && !ellipse(28157.051600, 40478.230000, 2065.272059, 2065.272059, 0.000000, X, Y) && !ellipse(26141.521423, 38233.990417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27812.287400, 39084.880000, 1589.160046, 557.207216, 130.033000, X, Y) && !ellipse(27472.676117, 40840.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28136.626000, 39435.986000, 1340.024039, 443.668813, 337.750200, X, Y) && !ellipse(28286.214264, 41284.247375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29105.686401, 38868.000793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26398.865448, 39272.696289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26938.006317, 41818.954346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24947.228180, 39973.228424, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 9 06:59:45 2013] Writing fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src35.gif [Thu May 9 07:36:23 2013] Mean detx,y = (-8391.69, 8707.80) [Thu May 9 07:36:24 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 9 07:36:33 2013] Binned source spectrum to 10 counts/bin [Thu May 9 07:36:33 2013] Setting source spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Thu May 9 07:36:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src35_bgd.pi.gz [Thu May 9 08:33:30 2013] Not generating rmf since there are only 59 counts [Thu May 9 08:33:30 2013] rmf not generated due to insufficient counts [Thu May 9 08:35:30 2013] Updating aperture counts using extracted products [Thu May 9 08:35:30 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 563.00 [Thu May 9 08:35:30 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 638.00 [Thu May 9 08:35:30 2013] Got source and background scale factors 1334212.000000, 2609548.000000 [Thu May 9 08:35:30 2013] User source parameters: Position = (304.1, 460.2) = 10 44 6.91 -59 33 8.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 236.8 +/- 24.7 Background aperture counts = 326.2 Rate = 0.007 +/- 0.0007 [Thu May 9 08:35:30 2013] Updating counts from extracted products [Thu May 9 08:35:30 2013] Set source signif. to 236.80/18.06 = 13.11 [Thu May 9 08:35:31 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 9 08:35:31 2013] Using photon index=1.80, rate=0.00702, arf fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src35.arf [Thu May 9 08:35:31 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 9 08:35:31 2013] Updating source flux to 2.7e-13 [Thu May 9 08:35:52 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 9 08:36:01 2013] xmm0112560101/analysis//spectral/fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete