[Tue May  7 19:12:58 2013] Detection parameters:
  Position = (182.8, 315.2) = 10 45 16.67 -59 43 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.5 +/- 16.1
  Background counts = 58.3
  Rate = 0.004 +/- 0.0005

[Tue May  7 19:13:00 2013] Off-axis axis estimate = 8.47'
[Wed May  8 08:10:37 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Wed May  8 08:10:37 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Wed May  8 08:10:37 2013] source mask rpix=2.5, npix_max = 34, mask sum = 27, frac = 0.775
[Wed May  8 08:10:37 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 10.66"
[Wed May  8 11:17:04 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src50.ximg exists
[Wed May  8 11:17:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src50.csv
[Wed May  8 11:17:04 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src50_1.ximg exists
[Wed May  8 11:17:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src50.csv
[Wed May  8 11:17:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 11:17:06 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Wed May  8 11:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed May  8 11:17:06 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Wed May  8 11:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed May  8 11:17:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 11:18:04 2013] Warning, spatial fit 50 centroid is now closest to src. 65
[Wed May  8 11:18:04 2013] Vigneting correction estimate = 1.000000
[Wed May  8 11:18:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 11:18:04 2013] Assessing source extent using major
[Wed May  8 11:18:04 2013] Source does appear to be extended
[Wed May  8 11:18:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 21:22:44 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Wed May  8 21:22:44 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Wed May  8 21:22:44 2013] source mask rpix=2.5, npix_max = 34, mask sum = 27, frac = 0.775
[Wed May  8 21:22:44 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 10.66"
[Wed May  8 23:36:25 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src47.ximg exists
[Wed May  8 23:36:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src47.csv
[Wed May  8 23:36:25 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src47_1.ximg exists
[Wed May  8 23:36:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src47.csv
[Wed May  8 23:36:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 23:36:27 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Wed May  8 23:36:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Wed May  8 23:36:27 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Wed May  8 23:36:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Wed May  8 23:36:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 23:37:19 2013] Spatial fit model total counts = 814.521000, observed total counts = 704.000000
[Wed May  8 23:37:19 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 23:37:19 2013] Vigneting correction estimate = 1.000000
[Wed May  8 23:37:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 23:37:19 2013] Assessing source extent using major
[Wed May  8 23:37:19 2013] Source does appear to be extended
[Wed May  8 23:37:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 06:59:44 2013] XMMSAS src. selection expression = ellipse(15854.575897, 27375.900299, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  9 06:59:44 2013] Writing source region out to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src22_src.reg
[Thu May  9 06:59:44 2013] Extracting stamp from image fullrun_mos2_xmm0112560101_pi300-10000_cl_sm2.00.img.gz, (145, 278) - (220, 353)
[Thu May  9 06:59:44 2013] XMMSAS bgd. selection expression = annulus(15854.575897, 27375.900299, 1087.500000, 2175.000000, X, Y) && !ellipse(17806.279968, 30341.023743, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(16474.580160, 25812.510400, 1284.432037, 454.638413, 72.830000, X, Y) && !ellipse(16402.057541, 26508.584534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18167.614853, 25343.998413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17917.400909, 28859.095245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14663.446121, 27274.164886, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 06:59:44 2013] Writing fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src22.gif
[Thu May  9 07:29:43 2013] Mean detx,y = (7824.64, 5921.98) 
[Thu May  9 07:29:44 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 07:29:58 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 07:29:58 2013] Setting source spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu May  9 07:29:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu May  9 08:31:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  9 08:31:02 2013] rmf not generated due to insufficient counts
[Thu May  9 08:35:26 2013] Updating aperture counts using extracted products
[Thu May  9 08:35:26 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 471.00
[Thu May  9 08:35:26 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1585.00
[Thu May  9 08:35:26 2013] Got source and background scale factors 975354.000000, 4449327.000000
[Thu May  9 08:35:26 2013] User source parameters:
  Position = (182.8, 315.2) = 10 45 16.67 -59 43 38.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 123.5 +/- 22.7
  Background aperture counts = 347.5
  Rate = 0.004 +/- 0.0007

[Thu May  9 08:35:26 2013] Updating counts from extracted products
[Thu May  9 08:35:26 2013] Set source signif. to 123.55/18.64 = 6.63
[Thu May  9 08:35:30 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 08:35:30 2013] Using photon index=1.80, rate=0.00366, arf fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src22.arf
[Thu May  9 08:35:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 08:35:30 2013] Updating source flux to 1.6e-13
[Thu May  9 08:35:52 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 08:36:01 2013] xmm0112560101/analysis//spectral/fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete