[Tue May  7 19:12:58 2013] Detection parameters:
  Position = (205.2, 349.3) = 10 45 3.70 -59 41 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34687.1 +/- 227.6
  Background counts = 66.6
  Rate = 1 +/- 0.007

[Tue May  7 19:13:00 2013] Off-axis axis estimate = 7.70'
[Wed May  8 08:10:37 2013] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Wed May  8 08:10:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 08:10:37 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Wed May  8 08:10:37 2013] source mask rpix=2.4, npix_max = 32, mask sum = 28, frac = 0.854
[Wed May  8 08:10:37 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.28"
[Wed May  8 11:17:03 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  8 11:17:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src1.csv
[Wed May  8 11:17:03 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  8 11:17:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src1.csv
[Wed May  8 11:17:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 11:17:05 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  8 11:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May  8 11:17:05 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  8 11:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May  8 11:17:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 11:18:03 2013] Spatial fit model total counts = 46347.900000, observed total counts = 37403.000000
[Wed May  8 11:18:03 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 11:18:04 2013] Vigneting correction estimate = 1.000000
[Wed May  8 11:18:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 11:18:04 2013] Assessing source extent using major
[Wed May  8 11:18:04 2013] Source does appear to be extended
[Wed May  8 11:18:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 11:18:04 2013] Source is confused with source 7
[Wed May  8 21:22:44 2013] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Wed May  8 21:22:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 21:22:44 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Wed May  8 21:22:44 2013] source mask rpix=2.4, npix_max = 32, mask sum = 28, frac = 0.854
[Wed May  8 21:22:44 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.28"
[Wed May  8 23:36:25 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src1.ximg exists
[Wed May  8 23:36:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src1.csv
[Wed May  8 23:36:25 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May  8 23:36:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src1.csv
[Wed May  8 23:36:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 23:36:26 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May  8 23:36:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May  8 23:36:26 2013] fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May  8 23:36:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May  8 23:36:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112560101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 23:37:19 2013] Spatial fit model total counts = 46339.200000, observed total counts = 37403.000000
[Wed May  8 23:37:19 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 23:37:19 2013] Vigneting correction estimate = 1.000000
[Wed May  8 23:37:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 23:37:19 2013] Assessing source extent using major
[Wed May  8 23:37:19 2013] Source does appear to be extended
[Wed May  8 23:37:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 06:59:43 2013] Counts = 34687.117188, rescaling region sizes by 3.000000
[Thu May  9 06:59:43 2013] XMMSAS src. selection expression = ellipse(17806.279968, 30341.023743, 1957.500000, 1957.500000, 0.000000, X, Y)
[Thu May  9 06:59:43 2013] Writing source region out to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src2_src.reg
[Thu May  9 06:59:43 2013] Extracting stamp from image fullrun_mos2_xmm0112560101_pi300-10000_cl_sm2.00.img.gz, (93, 237) - (318, 462)
[Thu May  9 06:59:43 2013] XMMSAS bgd. selection expression = annulus(17806.279968, 30341.023743, 9787.500000, 19575.000000, X, Y) && !ellipse(25850.647600, 27880.674000, 1423.039241, 1272.218437, 329.593500, X, Y) && !ellipse(28157.051600, 40478.230000, 2065.272059, 2065.272059, 0.000000, X, Y) && !ellipse(20767.140000, 39042.058800, 1035.528030, 738.155221, 352.967000, X, Y) && !ellipse(22335.879800, 26579.710400, 630.456018, 425.971212, 58.555200, X, Y) && !ellipse(26141.521423, 38233.990417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17742.296417, 30787.278412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16900.368000, 32146.092000, 1705.016049, 1705.016049, 0.000000, X, Y) && !ellipse(17115.161240, 24319.507568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21084.764572, 23478.726166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27549.597900, 27519.926160, 336.397610, 336.397610, 0.000000, X, Y) && !ellipse(27812.287400, 39084.880000, 1589.160046, 557.207216, 130.033000, X, Y) && !ellipse(16474.580160, 25812.510400, 1284.432037, 454.638413, 72.830000, X, Y) && !ellipse(27472.676117, 40840.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16402.057541, 26508.584534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21899.221359, 19429.497177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30396.112946, 38230.408783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27373.815100, 16767.727200, 546.271216, 287.700008, 356.083812, X, Y) && !ellipse(27008.156570, 31973.349800, 313.366409, 313.366409, 0.000000, X, Y) && !ellipse(28136.626000, 39435.986000, 1340.024039, 443.668813, 337.750200, X, Y) && !ellipse(29958.412781, 36732.916504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28832.406891, 16570.557648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18167.614853, 25343.998413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18185.910660, 32045.066681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23097.041809, 21616.330643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28572.729095, 32454.554504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28911.070000, 18550.431800, 1307.856038, 539.481616, 31.010125, X, Y) && !ellipse(35835.535187, 20846.701370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29687.278534, 37879.631622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25756.271362, 16501.748581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23881.182700, 32097.868000, 381.663211, 234.654407, 321.204614, X, Y) && !ellipse(23824.328674, 30552.934906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22711.521400, 34700.130400, 1650.336047, 474.832814, 351.632525, X, Y) && !ellipse(28286.214264, 41284.247375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21681.499664, 40204.691223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29105.686401, 38868.000793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22026.257600, 25242.193800, 317.428809, 317.428809, 0.000000, X, Y) && !ellipse(18767.861221, 14291.301285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26398.865448, 39272.696289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20268.022600, 27037.309000, 334.210410, 334.210410, 0.000000, X, Y) && !ellipse(34799.837463, 26414.777039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23070.251600, 29625.427400, 290.608008, 290.608008, 0.000000, X, Y) && !ellipse(17917.400909, 28859.095245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29852.335200, 21620.462800, 1350.048039, 505.184815, 321.845176, X, Y) && !ellipse(22812.575600, 25155.659200, 315.875209, 315.875209, 0.000000, X, Y) && !ellipse(21891.596115, 37655.350677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15854.575897, 27375.900299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30487.307384, 39089.124600, 857.200025, 251.940007, 346.910900, X, Y) && !ellipse(26938.006317, 41818.954346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30343.192902, 36368.601349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30993.600739, 32711.346283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18817.386810, 33634.558380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12789.879562, 21787.400818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33076.548218, 21723.025650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29506.471039, 42218.862823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20054.499039, 16194.166092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22886.545400, 40899.825400, 588.403217, 238.070407, 342.835800, X, Y) && !ellipse(20868.366600, 18062.545000, 534.842415, 534.842415, 0.000000, X, Y) && !ellipse(15067.213684, 36279.790619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24947.228180, 39973.228424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26470.426453, 44067.769470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19909.994000, 17622.857800, 792.904023, 792.904023, 0.000000, X, Y) && !ellipse(24714.525482, 28634.102753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34285.704315, 39248.816956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24066.327200, 26356.073200, 1160.512033, 444.010413, 129.900200, X, Y) && !ellipse(23121.170715, 26192.221863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15116.485718, 17075.911942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.043243, 39194.402130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14663.446121, 27274.164886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22492.032318, 42229.241333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.891724, 39234.535553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.293457, 39989.137360, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 06:59:43 2013] Writing fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src2.gif
[Thu May  9 06:59:55 2013] Mean detx,y = (4392.59, 7049.72) 
[Thu May  9 06:59:57 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 07:05:04 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 07:05:05 2013] Setting source spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May  9 07:05:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May  9 07:36:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  9 07:36:41 2013] rmf not generated due to insufficient counts
[Thu May  9 08:35:19 2013] Updating aperture counts using extracted products
[Thu May  9 08:35:19 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 44112.00
[Thu May  9 08:35:19 2013] Total counts from fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 103552.00
[Thu May  9 08:35:19 2013] Got source and background scale factors 10967920.000000, 334934372.000000
[Thu May  9 08:35:19 2013] User source parameters:
  Position = (205.2, 349.3) = 10 45 3.70 -59 41 4.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40721.0 +/- 211.0
  Background aperture counts = 3391.0
  Rate = 1 +/- 0.006

[Thu May  9 08:35:19 2013] Updating counts from extracted products
[Thu May  9 08:35:19 2013] Set source signif. to 40721.04/58.23 = 699.29
[Thu May  9 08:35:30 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 08:35:30 2013] Using photon index=1.80, rate=1.21, arf fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src2.arf
[Thu May  9 08:35:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 08:35:30 2013] Updating source flux to 3.5e-11
[Thu May  9 08:35:52 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 08:36:01 2013] xmm0112560101/analysis//spectral/fullrun_mos2_xmm0112560101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete