[Fri Sep 23 02:27:35 2011] Detection parameters:
  Position = (401.4, 403.2) = 12 29 32.09 13 44 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 342.5 +/- 22.4
  Background counts = 6.7
  Rate = 0.04 +/- 0.003

[Fri Sep 23 02:27:36 2011] Off-axis axis estimate = 10.65'
[Fri Sep 23 02:56:27 2011] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 02:56:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 02:56:27 2011] Initial guess for spatial extent in simple fitting = 11.76"
[Fri Sep 23 02:56:27 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.024
[Fri Sep 23 02:56:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.76"
[Fri Sep 23 03:20:18 2011] fullrun_mos1_xmm0112552101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 23 03:20:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112552101_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 03:20:18 2011] fullrun_mos1_xmm0112552101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 23 03:20:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112552101_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 03:20:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112552101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112552101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:20:19 2011] fullrun_mos1_xmm0112552101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 03:20:19 2011] fullrun_mos1_xmm0112552101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 03:20:19 2011] Fit fullrun_mos1_xmm0112552101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 03:41:26 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.441901 pixels away
[Fri Sep 23 03:41:26 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 03:41:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 03:41:26 2011] Assessing source extent using major
[Fri Sep 23 03:41:26 2011] Source does appear to be extended
[Fri Sep 23 03:41:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 04:15:44 2011] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 04:15:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 04:15:44 2011] Initial guess for spatial extent in simple fitting = 11.76"
[Fri Sep 23 04:15:44 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.024
[Fri Sep 23 04:15:44 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 11.76"
[Fri Sep 23 04:39:17 2011] fullrun_mos1_xmm0112552101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 23 04:39:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112552101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 04:39:17 2011] fullrun_mos1_xmm0112552101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 23 04:39:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112552101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 04:39:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112552101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112552101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 04:39:17 2011] fullrun_mos1_xmm0112552101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 04:39:17 2011] fullrun_mos1_xmm0112552101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 04:39:17 2011] Fit fullrun_mos1_xmm0112552101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 04:59:58 2011] Spatial fit model total counts = 434.994000, observed total counts = 435.000000
[Fri Sep 23 04:59:58 2011] Offset between fit and detection position for source 1 = 0.208524 pixels
[Fri Sep 23 04:59:58 2011] 435.651000 total counts/ 162.188000 bgd. counts: snr = 21.472826
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.208524 pixels
  Position = (401.3, 403.4) = 12 29 32.14 13 44 4.4
  Extent = 7.0 (6.3-7.7)", rotation angle = 0
  Source counts = 273.5 +/- 20.9
  Background counts = 162.2
  Rate = 0.02 +/- 0.002
[Fri Sep 23 04:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 04:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 04:59:58 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 04:59:58 2011] Source does appear to be extended
[Fri Sep 23 04:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 05:50:18 2011] XMMSAS src. selection expression = ellipse(34861.297400, 35043.342200, 419.840412, 419.840412, 0.000000, X, Y)
[Fri Sep 23 05:50:18 2011] Writing source region out to fullrun_mos1_xmm0112552101_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 23 05:50:18 2011] Extracting stamp from image fullrun_mos1_xmm0112552101_pi300-10000_cl_sm2.00.img.gz, (377, 379) - (425, 427)
[Fri Sep 23 05:50:18 2011] XMMSAS bgd. selection expression = annulus(34861.297400, 35043.342200, 699.734020, 1399.468040, X, Y) && !ellipse(36570.683594, 36166.566895, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 23 05:50:18 2011] Writing fullrun_mos1_xmm0112552101_pi300-10000_pass1_cl_src1.gif
[Fri Sep 23 05:50:20 2011] Mean detx,y = (2493.66, 10824.70) 
[Fri Sep 23 05:50:21 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 05:50:30 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 05:50:31 2011] Setting source spectrum file to fullrun_mos1_xmm0112552101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 23 05:50:31 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112552101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 23 06:22:43 2011] Updating aperture counts using extracted products
[Fri Sep 23 06:22:43 2011] Error reading totcts from fullrun_mos1_xmm0112552101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 23 06:22:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 06:22:43 2011] Using photon index=1.80, rate=0.0203, arf fullrun_mos1_xmm0112552101_pi300-10000_pass1_cl_src1.arf
[Fri Sep 23 06:22:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 06:22:43 2011] Updating source flux to 3.6e-13
[Fri Sep 23 06:23:00 2011] Reading fit data from xmm0112552101/analysis//spectral/fullrun_mos1_xmm0112552101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Sep 23 06:23:00 2011] Spectral fit parameter nH value = 1.09527e+21
[Fri Sep 23 06:23:00 2011] Spectral fit parameter PhoIndex value = 1.99274
[Fri Sep 23 06:23:00 2011] Failed to get F(0.3-8.0) from xmm0112552101/analysis//spectral/fullrun_mos1_xmm0112552101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 06:23:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 06:23:00 2011] Using Nh = 1.1e+21, photon index=1.99, rate=0.0203, arf fullrun_mos1_xmm0112552101_pi300-10000_pass1_cl_src1.arf
[Fri Sep 23 06:23:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 06:23:00 2011] Updating source flux to 3.6e-13