[Wed Apr 11 07:28:30 2012] Detection parameters:
  Position = (311.0, 336.3) = 10 17 35.10 21 42 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.4 +/- 6.4
  Background counts = 4.1
  Rate = 0.002 +/- 0.0005

[Wed Apr 11 07:28:31 2012] Off-axis axis estimate = 2.89'
[Wed Apr 11 07:28:49 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 07:28:49 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Wed Apr 11 07:28:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.937
[Wed Apr 11 07:28:49 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.87"
[Wed Apr 11 07:28:50 2012] fullrun_mos2_xmm0112552001_pi300-10000_cl_pass0_src28.ximg exists
[Wed Apr 11 07:28:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112552001_pi300-10000_cl_pass0_src28.csv
[Wed Apr 11 07:28:50 2012] fullrun_mos2_xmm0112552001_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Apr 11 07:28:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112552001_pi300-10000_cl_pass0_src28.csv
[Wed Apr 11 07:28:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112552001_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112552001_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 07:28:50 2012] fullrun_mos2_xmm0112552001_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Apr 11 07:28:50 2012] fullrun_mos2_xmm0112552001_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Apr 11 07:28:50 2012] Fit fullrun_mos2_xmm0112552001_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed Apr 11 07:29:03 2012] Spatial fit model total counts = 70.546800, observed total counts = 67.000000
[Wed Apr 11 07:29:03 2012] Offset between fit and detection position for source 15 = 0.221476 pixels
[Wed Apr 11 07:29:03 2012] 69.602500 total counts/ 54.832700 bgd. counts: snr = 1.994595
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.221476 pixels
  Position = (310.8, 336.2) = 10 17 35.17 21 42 21.8
  Extent = 2.9 (2.1-4.5)", rotation angle = 0
  Source counts = 14.8 +/- 8.3
  Background counts = 54.8
  Rate = 0.001 +/- 0.0006
[Wed Apr 11 07:29:03 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 07:29:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 07:29:03 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 07:29:03 2012] Source does appear to be extended
[Wed Apr 11 07:29:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 07:29:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 07:29:14 2012] Initial guess for spatial extent in simple fitting = 2.93"
[Wed Apr 11 07:29:14 2012] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.726
[Wed Apr 11 07:29:14 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 2.93"
[Wed Apr 11 07:29:15 2012] fullrun_mos2_xmm0112552001_pi300-10000_cl_pass1_src28.ximg exists
[Wed Apr 11 07:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112552001_pi300-10000_cl_pass1_src28.csv
[Wed Apr 11 07:29:15 2012] fullrun_mos2_xmm0112552001_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Apr 11 07:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112552001_pi300-10000_cl_pass1_src28.csv
[Wed Apr 11 07:29:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112552001_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112552001_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 07:29:15 2012] fullrun_mos2_xmm0112552001_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Apr 11 07:29:15 2012] fullrun_mos2_xmm0112552001_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Apr 11 07:29:15 2012] Fit fullrun_mos2_xmm0112552001_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Apr 11 07:29:27 2012] Spatial fit model total counts = 70.770500, observed total counts = 66.000000
[Wed Apr 11 07:29:27 2012] Offset between fit and detection position for source 15 = 0.408040 pixels
[Wed Apr 11 07:29:27 2012] 70.048600 total counts/ 59.040300 bgd. counts: snr = 1.432669
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.408040 pixels
  Position = (310.5, 336.5) = 10 17 35.27 21 42 22.9
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 11.0 +/- 8.4
  Background counts = 59.0
  Rate = 0.0008 +/- 0.0006
  Deleting source due to low Poisson probability