[Wed Apr 11 07:28:26 2012] Detection parameters:
  Position = (285.2, 455.1) = 10 17 43.19 21 51 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 303.3 +/- 21.4
  Background counts = 3.8
  Rate = 0.02 +/- 0.002

[Wed Apr 11 07:28:28 2012] Off-axis axis estimate = 11.40'
[Wed Apr 11 07:28:48 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 07:28:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 07:28:48 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Wed Apr 11 07:28:48 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.832
[Wed Apr 11 07:28:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.13"
[Wed Apr 11 07:28:49 2012] fullrun_mos1_xmm0112552001_pi300-10000_cl_pass0_src1.ximg exists
[Wed Apr 11 07:28:49 2012] fullrun_mos1_xmm0112552001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Apr 11 07:28:49 2012] Fit fullrun_mos1_xmm0112552001_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Apr 11 07:28:49 2012] fullrun_mos1_xmm0112552001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Apr 11 07:28:49 2012] fullrun_mos1_xmm0112552001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Apr 11 07:28:49 2012] Fit fullrun_mos1_xmm0112552001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Apr 11 07:28:59 2012] Spatial fit model total counts = 356.943000, observed total counts = 358.000000
[Wed Apr 11 07:28:59 2012] Offset between fit and detection position for source 3 = 0.211873 pixels
[Wed Apr 11 07:28:59 2012] 357.043000 total counts/ 112.915000 bgd. counts: snr = 22.974273
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.211873 pixels
  Position = (285.0, 455.1) = 10 17 43.25 21 50 58.9
  Extent = 7.7 (6.8-8.5)", rotation angle = 0
  Source counts = 244.1 +/- 18.9
  Background counts = 112.9
  Rate = 0.02 +/- 0.001
[Wed Apr 11 07:28:59 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 07:28:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 07:28:59 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 07:28:59 2012] Source does appear to be extended
[Wed Apr 11 07:28:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 07:29:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 07:29:13 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed Apr 11 07:29:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Wed Apr 11 07:29:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.69"
[Wed Apr 11 07:29:13 2012] fullrun_mos1_xmm0112552001_pi300-10000_cl_pass1_src1.ximg exists
[Wed Apr 11 07:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112552001_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 07:29:13 2012] fullrun_mos1_xmm0112552001_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Apr 11 07:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112552001_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 07:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112552001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112552001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 07:29:14 2012] fullrun_mos1_xmm0112552001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Apr 11 07:29:14 2012] fullrun_mos1_xmm0112552001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Apr 11 07:29:14 2012] Fit fullrun_mos1_xmm0112552001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Apr 11 07:29:24 2012] Spatial fit model total counts = 315.344000, observed total counts = 316.000000
[Wed Apr 11 07:29:24 2012] Offset between fit and detection position for source 3 = 0.009235 pixels
[Wed Apr 11 07:29:24 2012] 313.726300 total counts/ 86.486300 bgd. counts: snr = 24.434931
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.009235 pixels
  Position = (284.9, 455.1) = 10 17 43.25 21 50 59.0
  Extent = 7.1 (6.1-7.9)", rotation angle = 0
  Source counts = 227.2 +/- 17.7
  Background counts = 86.5
  Rate = 0.02 +/- 0.001
[Wed Apr 11 07:29:24 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 07:29:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 07:29:24 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 07:29:24 2012] Source does appear to be extended
[Wed Apr 11 07:29:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 07:29:40 2012] XMMSAS src. selection expression = ellipse(24741.965400, 39546.981800, 424.580412, 424.580412, 0.000000, X, Y)
[Wed Apr 11 07:29:40 2012] Not overwriting source region fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_src.reg
[Wed Apr 11 07:29:40 2012] Extracting stamp from image fullrun_mos1_xmm0112552001_pi300-10000_cl_sm2.00.img.gz, (261, 431) - (309, 480)
[Wed Apr 11 07:29:40 2012] XMMSAS bgd. selection expression = annulus(24741.965400, 39546.981800, 707.634020, 1415.268041, X, Y)
[Wed Apr 11 07:29:40 2012] Writing fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3.gif
[Wed Apr 11 07:29:41 2012] ../../xmm0112552001/products/events/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112552001/products/events/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Apr 11 07:29:41 2012] Mean detx,y = (11388.56, 3470.71) 
[Wed Apr 11 07:29:41 2012] ../../xmm0112552001/products/images/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112552001/products/images/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Apr 11 07:29:41 2012] ../../xmm0112552001/products/spectra/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0112552001/products/spectra/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Apr 11 07:29:41 2012] Setting source spectrum file to fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 07:29:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Apr 11 07:29:41 2012] ../../xmm0112552001/products/lightcurves/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112552001/products/lightcurves/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Apr 11 07:29:43 2012] fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Wed Apr 11 07:29:43 2012] fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Wed Apr 11 07:29:57 2012] Updating aperture counts using extracted products
[Wed Apr 11 07:29:57 2012] Error reading totcts from fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 07:29:57 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 07:29:57 2012] Using photon index=1.80, rate=0.0162, arf fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3.arf
[Wed Apr 11 07:29:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 07:29:57 2012] Updating source flux to 3.5e-13
[Wed Apr 11 07:30:01 2012] Reading fit data from xmm0112552001/analysis//spectral/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_pl.csv
[Wed Apr 11 07:30:01 2012] Spectral fit parameter nH value = 3.68841e+20
[Wed Apr 11 07:30:01 2012] Spectral fit parameter PhoIndex value = 2.05244
[Wed Apr 11 07:30:01 2012] Failed to get F(0.3-8.0) from xmm0112552001/analysis//spectral/fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Apr 11 07:30:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 07:30:01 2012] Using Nh = 3.7e+20, photon index=2.05, rate=0.0162, arf fullrun_mos1_xmm0112552001_pi300-10000_pass1_cl_src3.arf
[Wed Apr 11 07:30:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 07:30:01 2012] Updating source flux to 3.2e-13