[Wed Sep 28 22:20:22 2011] Detection parameters:
  Position = (294.0, 321.8) = 13 42 8.42 35 39 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10033.4 +/- 119.7
  Background counts = 4.8
  Rate = 0.6 +/- 0.008

[Wed Sep 28 22:20:22 2011] Off-axis axis estimate = 1.72'
[Wed Sep 28 22:59:25 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 22:59:25 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Sep 28 22:59:25 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Sep 28 22:59:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Sep 28 23:32:41 2011] fullrun_mos1_xmm0112551701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 23:32:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112551701_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 23:32:41 2011] fullrun_mos1_xmm0112551701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 23:32:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112551701_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 23:32:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112551701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112551701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 23:32:42 2011] fullrun_mos1_xmm0112551701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 23:32:42 2011] fullrun_mos1_xmm0112551701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 23:32:42 2011] Fit fullrun_mos1_xmm0112551701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 00:07:52 2011] Source 3 is offset by 6.734759 and 5.491656 pixels which is larger than
2 X fitted extent = 0.837931 x 0.837931, not incorporating fit results
[Thu Sep 29 00:07:52 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 00:07:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 00:07:52 2011] Assessing source extent using major
[Thu Sep 29 00:07:52 2011] Source does appear to be extended
[Thu Sep 29 00:07:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 00:35:02 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 00:35:02 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Sep 29 00:35:02 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Sep 29 00:35:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Thu Sep 29 01:00:21 2011] fullrun_mos1_xmm0112551701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep 29 01:00:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112551701_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 01:00:21 2011] fullrun_mos1_xmm0112551701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep 29 01:00:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112551701_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 01:00:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112551701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112551701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 01:00:22 2011] fullrun_mos1_xmm0112551701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 01:00:22 2011] fullrun_mos1_xmm0112551701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 01:00:22 2011] Fit fullrun_mos1_xmm0112551701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 01:24:02 2011] Spatial fit model total counts = 8818.420000, observed total counts = 8819.000000
[Thu Sep 29 01:24:02 2011] Offset between fit and detection position for source 3 = 0.226079 pixels
[Thu Sep 29 01:24:02 2011] 8803.120000 total counts/ 1787.820000 bgd. counts: snr = 165.914504
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.226079 pixels
  Position = (293.9, 321.6) = 13 42 8.48 35 39 15.0
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 7015.3 +/- 93.8
  Background counts = 1787.8
  Rate = 0.4 +/- 0.006
[Thu Sep 29 01:24:02 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 01:24:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 01:24:02 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 01:24:02 2011] Source does appear to be extended
[Thu Sep 29 01:24:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 02:14:21 2011] Counts = 7015.300000, rescaling region sizes by 2.000000
[Thu Sep 29 02:14:21 2011] XMMSAS src. selection expression = ellipse(25517.315740, 27934.244200, 686.432420, 686.432420, 0.000000, X, Y)
[Thu Sep 29 02:14:21 2011] Writing source region out to fullrun_mos1_xmm0112551701_pi300-10000_pass1_cl_src3_src.reg
[Thu Sep 29 02:14:21 2011] Extracting stamp from image fullrun_mos1_xmm0112551701_pi300-10000_cl_sm2.00.img.gz, (254, 282) - (333, 361)
[Thu Sep 29 02:14:21 2011] XMMSAS bgd. selection expression = annulus(25517.315740, 27934.244200, 2288.108066, 4576.216132, X, Y) && !ellipse(25544.713318, 33152.909515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30399.977292, 28933.589200, 358.582410, 358.582410, 0.000000, X, Y) && !ellipse(27407.881200, 25519.033800, 316.091209, 316.091209, 0.000000, X, Y) && !ellipse(28925.461600, 24154.574000, 468.064813, 468.064813, 0.000000, X, Y)
[Thu Sep 29 02:14:21 2011] Writing fullrun_mos1_xmm0112551701_pi300-10000_pass1_cl_src3.gif
[Thu Sep 29 02:14:23 2011] Mean detx,y = (419.52, -417.41) 
[Thu Sep 29 02:14:24 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 02:14:42 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 02:14:42 2011] Setting source spectrum file to fullrun_mos1_xmm0112551701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Sep 29 02:14:42 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112551701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Sep 29 02:43:04 2011] Updating aperture counts using extracted products
[Thu Sep 29 02:43:04 2011] Error reading totcts from fullrun_mos1_xmm0112551701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Sep 29 02:43:04 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 02:43:04 2011] Using photon index=1.80, rate=0.437, arf fullrun_mos1_xmm0112551701_pi300-10000_pass1_cl_src3.arf
[Thu Sep 29 02:43:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 02:43:04 2011] Updating source flux to 4.1e-12
[Thu Sep 29 02:43:06 2011] Flag b found in src. 3 procflags, skipping spectral fitting
[Thu Sep 29 02:43:39 2011] Reading fit data from xmm0112551701/analysis//spectral/fullrun_mos1_xmm0112551701_pi300-10000_pass1_cl_src3_pl.csv
[Thu Sep 29 02:43:39 2011] Spectral fit parameter nH value = 1.53036e+14
[Thu Sep 29 02:43:39 2011] Spectral fit parameter PhoIndex value = 0.95298
[Thu Sep 29 02:43:39 2011] Failed to get F(0.3-8.0) from xmm0112551701/analysis//spectral/fullrun_mos1_xmm0112551701_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 02:43:39 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 02:43:39 2011] Using Nh = 1.5e+14, photon index=0.95, rate=0.437, arf fullrun_mos1_xmm0112551701_pi300-10000_pass1_cl_src3.arf
[Thu Sep 29 02:43:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 02:43:39 2011] Updating source flux to 6.6e-12