[Tue Sep 27 09:25:22 2011] Detection parameters:
  Position = (192.1, 306.0) = 1 49 22.27 5 55 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 524.8 +/- 28.0
  Background counts = 18.0
  Rate = 0.04 +/- 0.002

[Tue Sep 27 09:25:23 2011] Off-axis axis estimate = 7.73'
[Tue Sep 27 09:47:34 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 09:47:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 09:47:34 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Tue Sep 27 09:47:34 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.096
[Tue Sep 27 09:47:34 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.29"
[Tue Sep 27 09:57:20 2011] fullrun_mos2_xmm0112551501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Sep 27 09:57:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551501_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 09:57:20 2011] fullrun_mos2_xmm0112551501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Sep 27 09:57:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551501_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 09:57:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112551501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112551501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 09:57:20 2011] fullrun_mos2_xmm0112551501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 09:57:20 2011] fullrun_mos2_xmm0112551501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 09:57:20 2011] Fit fullrun_mos2_xmm0112551501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 09:57:27 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.597264 pixels away
[Tue Sep 27 09:57:27 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 09:57:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 09:57:27 2011] Assessing source extent using major
[Tue Sep 27 09:57:27 2011] Source does appear to be extended
[Tue Sep 27 09:57:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 10:27:55 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 10:27:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 10:27:55 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Tue Sep 27 10:27:55 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.096
[Tue Sep 27 10:27:55 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.29"
[Tue Sep 27 10:40:48 2011] fullrun_mos2_xmm0112551501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Sep 27 10:40:48 2011] fullrun_mos2_xmm0112551501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Sep 27 10:40:48 2011] Fit fullrun_mos2_xmm0112551501_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Sep 27 10:40:49 2011] fullrun_mos2_xmm0112551501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 10:40:49 2011] fullrun_mos2_xmm0112551501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 10:40:49 2011] Fit fullrun_mos2_xmm0112551501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 10:40:56 2011] Spatial fit model total counts = 439.027000, observed total counts = 479.000000
[Tue Sep 27 10:40:56 2011] Offset between fit and detection position for source 3 = 0.111548 pixels
[Tue Sep 27 10:40:56 2011] 439.147000 total counts/ 150.193000 bgd. counts: snr = 23.577832
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.111548 pixels
  Position = (192.2, 306.1) = 1 49 22.24 5 55 53.0
  Extent = 6.4" x 5.3", rotation angle = 60
  Source counts = 289.0 +/- 21.0
  Background counts = 150.2
  Rate = 0.02 +/- 0.001
[Tue Sep 27 10:40:56 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 10:40:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 10:40:56 2011] Assessing source extent using major
[Tue Sep 27 10:40:56 2011] Source does appear to be extended
[Tue Sep 27 10:40:56 2011] Computing asymmetry using major and minor axis, asym = 1.20
[Tue Sep 27 11:07:22 2011] XMMSAS src. selection expression = ellipse(16676.621073, 26581.933515, 385.395490, 319.953683, 60.257181, X, Y)
[Tue Sep 27 11:07:22 2011] Writing source region out to fullrun_mos2_xmm0112551501_pi300-10000_pass1_cl_src3_src.reg
[Tue Sep 27 11:07:22 2011] Extracting stamp from image fullrun_mos2_xmm0112551501_pi300-10000_cl_sm2.00.img.gz, (170, 284) - (214, 328)
[Tue Sep 27 11:07:22 2011] XMMSAS bgd. selection expression = annulus(16676.621073, 26581.933515, 642.325816, 1284.651632, X, Y)
[Tue Sep 27 11:07:22 2011] Writing fullrun_mos2_xmm0112551501_pi300-10000_pass1_cl_src3.gif
[Tue Sep 27 11:07:24 2011] Mean detx,y = (-7645.12, 1154.69) 
[Tue Sep 27 11:07:25 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 11:07:40 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 11:07:40 2011] Setting source spectrum file to fullrun_mos2_xmm0112551501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Sep 27 11:07:40 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112551501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Sep 27 11:14:03 2011] Updating aperture counts using extracted products
[Tue Sep 27 11:14:03 2011] Error reading totcts from fullrun_mos2_xmm0112551501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Sep 27 11:14:03 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 11:14:03 2011] Using photon index=1.80, rate=0.0162, arf fullrun_mos2_xmm0112551501_pi300-10000_pass1_cl_src3.arf
[Tue Sep 27 11:14:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 11:14:03 2011] Updating source flux to 2.5e-13
[Tue Sep 27 11:14:14 2011] Reading fit data from xmm0112551501/analysis//spectral/fullrun_mos2_xmm0112551501_pi300-10000_pass1_cl_src3_pl.csv
[Tue Sep 27 11:14:14 2011] Spectral fit parameter nH value = 8.70936e+20
[Tue Sep 27 11:14:14 2011] Spectral fit parameter PhoIndex value = 1.8595
[Tue Sep 27 11:14:14 2011] Failed to get F(0.3-8.0) from xmm0112551501/analysis//spectral/fullrun_mos2_xmm0112551501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 11:14:14 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 11:14:14 2011] Using Nh = 8.7e+20, photon index=1.86, rate=0.0162, arf fullrun_mos2_xmm0112551501_pi300-10000_pass1_cl_src3.arf
[Tue Sep 27 11:14:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 11:14:14 2011] Updating source flux to 2.7e-13