[Wed Oct  5 01:50:28 2011] Detection parameters:
  Position = (522.3, 253.8) = 12 8 0.75 43 39 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.6 +/- 17.9
  Background counts = 9.8
  Rate = 0.02 +/- 0.002

[Wed Oct  5 01:50:28 2011] Off-axis axis estimate = 16.55'
[Wed Oct  5 01:51:34 2011] Using EEF radius (= 14.70 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 01:51:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 01:51:34 2011] Initial guess for spatial extent in simple fitting = 14.70"
[Wed Oct  5 01:51:34 2011] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.063
[Wed Oct  5 01:51:34 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 14.70"
[Wed Oct  5 02:26:06 2011] fullrun_pn_xmm0112551201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Oct  5 02:26:06 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112551201_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 02:26:06 2011] fullrun_pn_xmm0112551201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Oct  5 02:26:06 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112551201_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 02:26:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112551201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112551201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 02:26:07 2011] fullrun_pn_xmm0112551201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 02:26:07 2011] fullrun_pn_xmm0112551201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 02:26:07 2011] Fit fullrun_pn_xmm0112551201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 03:07:28 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 18.739274 pixels away
[Wed Oct  5 03:07:28 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:07:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:07:28 2011] Assessing source extent using major
[Wed Oct  5 03:07:28 2011] Source does appear to be extended
[Wed Oct  5 03:07:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:07:28 2011] Source is confused with source 18
[Wed Oct  5 03:07:41 2011] Using EEF radius (= 14.70 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:07:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 03:07:41 2011] Initial guess for spatial extent in simple fitting = 14.70"
[Wed Oct  5 03:07:41 2011] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.063
[Wed Oct  5 03:07:41 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 14.70"
[Wed Oct  5 03:38:51 2011] fullrun_pn_xmm0112551201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Oct  5 03:38:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112551201_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 03:38:51 2011] fullrun_pn_xmm0112551201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Oct  5 03:38:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112551201_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 03:38:51 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112551201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112551201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:38:52 2011] fullrun_pn_xmm0112551201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 03:38:52 2011] fullrun_pn_xmm0112551201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 03:38:52 2011] Fit fullrun_pn_xmm0112551201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 04:14:26 2011] Spatial fit model total counts = 523.260000, observed total counts = 521.000000
[Wed Oct  5 04:14:26 2011] Offset between fit and detection position for source 3 = 3.526887 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.526887 pixels
  Position = (522.6, 250.3) = 12 8 0.64 43 39 15.3
  Extent = 21.6 (19.0-23.7)", rotation angle = 0
  Source counts = 527.5 +/- 23.0
  Background counts = 0.0
  Rate = 0.05 +/- 0.002
[Wed Oct  5 04:14:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:14:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:14:26 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:14:26 2011] Source does appear to be extended
[Wed Oct  5 04:14:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:14:37 2011] XMMSAS src. selection expression = ellipse(45420.067200, 21725.332000, 1294.878037, 1294.878037, 0.000000, X, Y)
[Wed Oct  5 04:14:37 2011] Writing source region out to fullrun_pn_xmm0112551201_pi300-10000_pass1_cl_src3_src.reg
[Wed Oct  5 04:14:37 2011] Extracting stamp from image fullrun_pn_xmm0112551201_pi300-10000_cl_sm2.00.img.gz, (448, 176) - (595, 325)
[Wed Oct  5 04:14:37 2011] XMMSAS bgd. selection expression = annulus(45420.067200, 21725.332000, 2158.130062, 4316.260124, X, Y) && !ellipse(44914.522034, 21880.223297, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 04:14:37 2011] Writing fullrun_pn_xmm0112551201_pi300-10000_pass1_cl_src3.gif
[Wed Oct  5 04:15:29 2011] Mean detx,y = (-13924.10, -13630.34) 
[Wed Oct  5 04:15:31 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 04:16:28 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 04:16:28 2011] Setting source spectrum file to fullrun_pn_xmm0112551201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Oct  5 04:16:28 2011] Setting bgd. spectrum file to fullrun_pn_xmm0112551201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Oct  5 05:05:03 2011] Updating aperture counts using extracted products
[Wed Oct  5 05:05:03 2011] Error reading totcts from fullrun_pn_xmm0112551201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Oct  5 05:05:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 05:05:03 2011] Using photon index=1.80, rate=0.0528, arf fullrun_pn_xmm0112551201_pi300-10000_pass1_cl_src3.arf
[Wed Oct  5 05:05:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 05:05:03 2011] Updating source flux to 4.6e-13
[Wed Oct  5 05:05:55 2011] Flag c found in src. 3 procflags, skipping spectral fitting