[Wed Oct  5 01:50:55 2011] Detection parameters:
  Position = (300.1, 275.8) = 12 9 29.81 43 41 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2581.8 +/- 60.1
  Background counts = 7.2
  Rate = 0.2 +/- 0.004

[Wed Oct  5 01:50:55 2011] Off-axis axis estimate = 1.64'
[Wed Oct  5 02:43:02 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 02:43:02 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Oct  5 02:43:02 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Oct  5 02:43:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Oct  5 03:07:24 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Oct  5 03:07:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 03:07:24 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Oct  5 03:07:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 03:07:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:07:24 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 03:07:24 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 03:07:24 2011] Fit fullrun_mos2_xmm0112551201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 03:07:34 2011] Spatial fit model total counts = 2373.010000, observed total counts = 2373.000000
[Wed Oct  5 03:07:34 2011] Offset between fit and detection position for source 5 = 0.130898 pixels
[Wed Oct  5 03:07:34 2011] 2376.105000 total counts/ 549.795000 bgd. counts: snr = 77.888637
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.130898 pixels
  Position = (300.2, 275.7) = 12 9 29.80 43 41 8.1
  Extent = 5.7 (5.4-5.9)", rotation angle = 0
  Source counts = 1826.3 +/- 48.7
  Background counts = 549.8
  Rate = 0.1 +/- 0.003
[Wed Oct  5 03:07:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:07:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:07:34 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:07:34 2011] Source does appear to be extended
[Wed Oct  5 03:07:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:55:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:55:16 2011] Initial guess for spatial extent in simple fitting = 5.66"
[Wed Oct  5 03:55:16 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.925
[Wed Oct  5 03:55:16 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.66"
[Wed Oct  5 04:14:21 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Oct  5 04:14:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 04:14:21 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Oct  5 04:14:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 04:14:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:14:21 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 04:14:21 2011] fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 04:14:21 2011] Fit fullrun_mos2_xmm0112551201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 04:14:30 2011] Spatial fit model total counts = 2376.000000, observed total counts = 2376.000000
[Wed Oct  5 04:14:30 2011] Offset between fit and detection position for source 5 = 0.015016 pixels
[Wed Oct  5 04:14:30 2011] 2388.816000 total counts/ 561.226000 bgd. counts: snr = 77.145373
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.015016 pixels
  Position = (300.2, 275.7) = 12 9 29.80 43 41 8.0
  Extent = 5.7 (5.4-5.9)", rotation angle = 0
  Source counts = 1827.6 +/- 48.9
  Background counts = 561.2
  Rate = 0.1 +/- 0.003
[Wed Oct  5 04:14:30 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:14:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:14:30 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:14:30 2011] Source does appear to be extended
[Wed Oct  5 04:14:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:53:10 2011] Counts = 1827.590000, rescaling region sizes by 2.000000
[Wed Oct  5 04:53:10 2011] XMMSAS src. selection expression = ellipse(26066.930820, 23935.669400, 679.455620, 679.455620, 0.000000, X, Y)
[Wed Oct  5 04:53:10 2011] Writing source region out to fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src5_src.reg
[Wed Oct  5 04:53:10 2011] Extracting stamp from image fullrun_mos2_xmm0112551201_pi300-10000_cl_sm2.00.img.gz, (261, 237) - (339, 315)
[Wed Oct  5 04:53:10 2011] XMMSAS bgd. selection expression = annulus(26066.930820, 23935.669400, 2264.852065, 4529.704130, X, Y) && !ellipse(29586.868000, 21811.306000, 284.308008, 284.308008, 0.000000, X, Y) && !ellipse(23729.175800, 20032.877600, 372.925611, 372.925611, 0.000000, X, Y) && !ellipse(30245.570129, 22326.377075, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 04:53:10 2011] Writing fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src5.gif
[Wed Oct  5 04:53:12 2011] Mean detx,y = (114.64, 43.17) 
[Wed Oct  5 04:53:13 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 04:53:29 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 04:53:29 2011] Setting source spectrum file to fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Oct  5 04:53:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Oct  5 05:05:04 2011] Updating aperture counts using extracted products
[Wed Oct  5 05:05:04 2011] Error reading totcts from fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Oct  5 05:05:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 05:05:04 2011] Using photon index=1.80, rate=0.127, arf fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src5.arf
[Wed Oct  5 05:05:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 05:05:04 2011] Updating source flux to 1.3e-12
[Wed Oct  5 05:05:55 2011] Reading fit data from xmm0112551201/analysis//spectral/fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src5_pl.csv
[Wed Oct  5 05:05:55 2011] Spectral fit parameter nH value = 7.23935e+22
[Wed Oct  5 05:05:55 2011] Spectral fit parameter PhoIndex value = 1.2922
[Wed Oct  5 05:05:55 2011] Failed to get F(0.3-8.0) from xmm0112551201/analysis//spectral/fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 05:05:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 05:05:55 2011] Using Nh = 7.2e+22, photon index=1.29, rate=0.127, arf fullrun_mos2_xmm0112551201_pi300-10000_pass1_cl_src5.arf
[Wed Oct  5 05:05:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 05:05:55 2011] Updating source flux to 4.4e-12